Is the 2021 Q3 equipped with a dry or wet clutch?

2 Answers
JudeLee
07/29/25 1:25am
The 1.4T model of the 2021 Q3 is equipped with a dry dual-clutch transmission, while the 2.0T model features a wet dual-clutch transmission. Both dry and wet types operate on essentially the same transmission principle, with two clutches taking turns to work. However, they differ in the connecting medium between the clutch's driving and driven plates: dry dual-clutch transmissions use air, whereas wet dual-clutch transmissions utilize oil. Additional information about the 2021 Q3 is as follows: 1. Exterior: The entire Sport line comes with the "Audi Exclusive Black Exterior Gloss Package." The 40TFSI Advanced Sport model also offers a special "Audi Exclusive Black Exterior Gloss Package Special Edition." Additionally, the 2020 Q3 will provide 18-inch/19-inch wheels in four new styles and 10 exclusive body colors. 2. Powertrain: The 2020 Q3 continues to offer two engines, a 1.4T and a 2.0T. The 1.4TFSI delivers a maximum power of 110kW (150PS), while the low-power and high-power versions of the 2.0T engine produce 137kW (182PS) and 162kW (220PS) respectively. All models are paired with a 7-speed Stronic dual-clutch transmission, with the high-end versions featuring the quattro ultra all-wheel-drive system.
Was this review help?
19
0
Share
DelLincoln
08/12/25 5:32am
I work in automotive repair and frequently handle various Audi models. The 2021 Audi Q3 comes standard with a wet dual-clutch transmission. The wet design relies on oil to cool the clutch, effectively preventing overheating, making it particularly suitable for mid-sized SUVs like the Q3 with high engine torque output. The wet system smoothly handles frequent gear shifts in urban traffic congestion. It's far more durable than dry systems, rarely causing issues even after several years of use—just regular oil changes during maintenance are needed. I recommend owners pay attention to the transmission fluid replacement interval, typically checking every 60,000 kilometers to avoid performance degradation due to aged fluid. Choosing a wet system was a smart decision by Audi, as it complements the Q3's drivetrain, enhancing driving comfort and fuel efficiency.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

Will I get points deducted for not signaling when turning left?

According to Article 57, Items 1 and 2 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China': 'Motor vehicles shall use turn signals in accordance with the following provisions: (1) When turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn, the left turn signal shall be activated in advance; (2) When turning right, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside, the right turn signal shall be activated in advance.' Penalty for violation: Failure to use turn signals as required may result in a fine of 20-200 RMB and 1 point deducted from the driver's license. Therefore, not signaling when turning left is a violation of traffic rules, and the driver will be penalized with 1 point deducted and a fine of 100 RMB.
16
5
Share

What are the regulations for rear seat seatbelts?

According to Article 51 of the Road Traffic Safety Law of the People's Republic of China, both motor vehicle drivers and passengers must wear seatbelts. The regulation applies regardless of whether passengers sit in the front or rear seats - seatbelts must be worn upon entering the vehicle. Below is relevant legal information about seatbelt usage: Penalty for not wearing rear seatbelts: On expressways, passengers not wearing seatbelts will be fined 20 RMB. When a vehicle is in motion, passengers not wearing seatbelts will be fined 5 RMB. On urban roads with speeds below 50km/h, traffic police may issue verbal warnings to unbelted passengers who must immediately fasten their seatbelts. Driver bears responsibility for unbelted rear passengers: Rear seatbelt usage has become a hot topic recently, with varying penalty regulations across regions. Always follow local specific policies, but in most areas the driver is penalized, so never take chances.
15
1
Share

What are the advantages and disadvantages of on-demand four-wheel drive on icy and snowy roads?

On-demand four-wheel drive has the following advantages and disadvantages when driving on icy and snowy roads: Advantages: At high speeds, on-demand four-wheel drive mainly provides better traction, with less tire slippage under high torque. Additionally, the four-wheel drive system offers some assistance in suppressing side slips on slippery roads and improving vehicle tracking. Disadvantages: Most on-demand four-wheel drive systems are limited by structural flaws when transferring power between the front and rear axles, unable to deliver more than 50% of the power to the rear axle, resulting in incomplete power utilization. Comparatively, the active safety of on-demand four-wheel drive vehicles is not as high as that of full-time four-wheel drive vehicles.
3
2
Share

What is the Principle of Anti-glare Rearview Mirrors?

Manual anti-glare mirrors reduce glare through optical principles, while automatic ones use electronic principles to minimize glare. Below is the related knowledge about rearview mirror principles: Principle of Manual Anti-glare Rearview Mirrors: The mirror of a manual anti-glare rearview mirror is not a flat mirror with uniform thickness but a wedge-shaped mirror with an angle of approximately 10°. When the anti-glare lever is pushed forward, the entire mirror tilts upward by about 10°. At this point, only the semi-transparent coating layer of the rearview mirror is observed. This coating layer has a lower refractive index to light, thus providing a certain anti-glare effect. Principle of Automatic Anti-glare Rearview Mirrors: An automatic anti-glare rearview mirror consists of a special mirror, two photodiodes (front and rear), and an electronic controller.
11
3
Share

Where is the Bluetooth switch for the 8th generation Accord?

The Bluetooth button for the 8th generation Accord is located in the central control display. Here are the relevant details: How to turn on Bluetooth: Power on the vehicle, open the central control display, find the settings option, enter the Bluetooth audio option, and click to turn on Bluetooth. Technical basis: Car Bluetooth is an in-vehicle wireless hands-free system designed and developed based on wireless Bluetooth technology. Function: The main function of car Bluetooth is to connect with mobile phones via Bluetooth technology for hands-free calls during normal driving, achieving the purpose of freeing hands and reducing the risk of traffic accidents. It automatically recognizes mobile phones and can connect with them without the need for cables or phone holders.
15
3
Share

Why was Continental UC6 discontinued?

Continental UC6 tires have not been discontinued. The wear conditions of the tires are as follows: Wear indicators: When the tire tread is nearly worn out, meaning the remaining tread depth is less than 1.6mm, the tire's grip becomes very poor, especially during rainy or snowy weather. Tread wear: As the tread becomes shallower, water drainage is impaired, creating a water film between the road surface and the tire. This can cause the vehicle to lose traction, leading to loss of control. Tire slippage: The amount of tire slippage increases significantly, and the braking distance grows dramatically. This not only worsens the vehicle's handling stability but can also cause traffic accidents.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.