···
Log in / Register

Is the 2020 new Emgrand model compliant with China VI emission standards?

3 Answers
LeAlessandra
08/29/25 5:28am
Emgrand 2020 new model is compliant with China VI. Definition of China VI standard: The China VI emission standards for motor vehicles refer to the national standards formulated to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled ignition engines, protect the ecological environment, and safeguard human health. Composition of China VI standard: It consists of two parts: Limits and Measurement Methods for Emissions from Light-duty Vehicles (China VI) and Limits and Measurement Methods for Emissions from Heavy-duty Diesel Vehicles (China VI).
Was this review help?
18
0
Share
LaAaron
09/11/25 3:12am
With over a decade of experience in automotive technology, I can confirm that the 2020 Emgrand definitely meets the China 6 emission standards. The Chinese government fully implemented the China 6B emission policy in July 2020, and as a mainstream brand, Geely's new models all comply with these standards—otherwise, they wouldn't be eligible for registration. China 6 represents the strictest emission requirements currently in place, significantly reducing nitrogen oxides and particulate matter emissions compared to older standards. This means the Emgrand's engine has undergone tuning and upgrades, incorporating better catalytic converters and sensor systems. You might notice smoother acceleration when driving, but it's also important to maintain regular servicing and use low-ash engine oil to avoid clogging the particulate filter. In fact, China 6-compliant vehicles greatly contribute to urban air quality and make annual inspections easier. If you're concerned, just check the vehicle's environmental compliance list or VIN code for confirmation—most 2020 models are compliant. Choosing it is both eco-friendly and practical.
Was this review help?
11
2
Share
Expand All
LaJeremiah
10/25/25 4:01am
As the owner of a 2020 Emgrand, I confirmed it met China 6 standards immediately after purchase last year. The dealer specifically presented the environmental certification documents during delivery, and there were no issues during registration. The China 6 standard requires nearly 50% reduction in emissions - it runs cleaner than older models with noticeably less exhaust smell in city traffic. My daily commute averages about 7.5L/100km fuel consumption with responsive engine performance. Maintenance sees minor changes - the 4S shop recommends China 6-compatible oil and filters, slightly increasing costs but extending component lifespan. Overall very satisfied - this model strikes an excellent balance between economy and environmental protection. Highly recommended for friends who value air quality and ownership costs.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What is the penalty for driving at 100 in a 40 speed limit zone?

Driving at 100 in a 40 speed limit zone will result in 12 demerit points. Driving at 100 in a 40 speed limit zone requires revocation of the driver's license.
16
1
Share

Where is Hanteng Auto from?

Hanteng Auto is from Shangrao, Jiangxi. Jiangxi Hanteng Auto's predecessor was Jiangxi Lantu Auto Co., Ltd., a private vehicle manufacturing enterprise focusing on the research, production, and sales of traditional vehicles, new energy vehicles, and key automotive components. Taking the 2020 Hanteng X7 as an example, its body dimensions are 4671mm in length, 1902mm in width, and 1697mm in height, with a wheelbase of 2810mm, a fuel tank capacity of 60 liters, a trunk capacity of 414 liters, and a curb weight of 1582kg. The front suspension of this vehicle is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. In terms of power, it is equipped with a 1.5L turbocharged engine, with a maximum power of 115kW and a maximum torque of 215Nm.
11
1
Share

Why does the Mercedes GLC260 make a noise when slowly releasing the brakes?

Reasons for the noise when slowly releasing the brakes on the Mercedes GLC260: rusted brake pads/discs, new brake pads. Rusted brake pads/discs: After parking for a long time, especially in humid weather or after rain, some rust or dirt may form on the brake discs or brake pads. This can usually be resolved by driving for a while or by applying butter or special lubricant to the connection between the brake pads and the brake calipers. New brake pads: New cars or those with newly replaced brake pads may produce similar noises when braking. This is because new brake pads and discs require a break-in period. The noise during braking is completely normal during this process.
5
3
Share

What causes the abnormal noise from the right rear wheel of a Corolla while driving?

The reasons for abnormal noise from the right rear wheel of a Corolla while driving are as follows: Foreign objects in the tire: It could be that stones are stuck in the tire tread, causing abnormal noise. This noise will change frequency with variations in vehicle speed. Faster speed results in a higher frequency, while slower speed results in a lower frequency. Brake pads worn to the limit: The abnormal noise may be caused by the brake pad's limit metal piece rubbing against the brake disc. It is recommended to check the thickness of the brake pads. If the thickness is less than 3MM, replacement is needed. Worn wheel bearing: The noise could be due to wheel bearing wear causing looseness and resulting in abnormal noise. The wheel bearings should be inspected.
6
5
Share

What Causes Skoda Transmission Failure?

When a Skoda transmission fails, the transmission failure light on the dashboard will illuminate. It is recommended to visit a repair shop for a computer diagnostic scan to check the fault codes. Reasons for the transmission failure light to illuminate: The transmission failure light indicates a fault in the power control system, which could be due to a sensor or wiring issue. It is advisable to have it inspected at a service station, where technicians can use computer diagnostics to identify the specific fault based on the error codes. Daily maintenance of the transmission: During regular use, it is essential to frequently conduct full-load operational checks on the transmission. Observe whether the transmission operates smoothly, and check for any abnormal gaps or noises. Promptly identify the cause and make adjustments or repairs as needed.
10
1
Share

Why can't the Tiguan's trunk be opened with the key?

Reasons why the Tiguan's trunk cannot be opened with the key: the car key battery is dead, the car key is malfunctioning, or the opening method is different. Replacing a dead battery can be done by yourself: When the key becomes unresponsive during use, the owner can purchase a battery from a store and replace the old one. Solution for key malfunction: If the indicator light on the key is functioning normally but the vehicle does not respond, the owner can use the mechanical key to open the door manually and then drive the vehicle to a 4S shop for inspection. Different opening methods: Apart from the trunk switch malfunctioning or having a special opening method, different car models actually have various ways to open the trunk.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.