Is the 2019 Nissan Sylphy compliant with China VI emission standards?

Do Snow Tires Require Anti-Slip Chains?

Snow tires do not require anti-slip chains. Both anti-slip chains and snow tires are designed to prevent vehicle skidding during winter driving. Snow tires have larger tread patterns, providing better traction. The essence of using anti-slip chains is to increase friction between the tires and the ground, so choosing either one is sufficient. Winter tires are different from snow tires; winter tires are defined as tires suitable for use at temperatures below 7 degrees Celsius, not specifically for snowy conditions. Compared to summer tires, snow tires have wider treads, deeper grooves, and softer rubber compounds, offering greater friction and stronger grip. Anti-slip chains are generally made of steel chains, rubber chains, or polyurethane chains. Steel anti-slip chains are more durable but harder to install and remove, and they can cause some wear to the car tires. Rubber anti-slip chains can function well in low-temperature environments, with good elasticity and strong friction.

19

4

Share

Is the Chevrolet Tracker Equipped with a Three-Cylinder Engine?

The Chevrolet Tracker is powered by a three-cylinder engine. A three-cylinder engine consists of three cylinders, where three identical single cylinders are arranged within a single engine block sharing a common crankshaft to output power. Its primary function is to convert chemical energy into mechanical energy. The fundamental principle of a three-cylinder engine involves the combustion and expansion of the air-fuel mixture inside the sealed cylinder when gasoline (or diesel) chemical energy is converted into thermal energy, thereby driving the piston to perform work and transforming thermal energy back into mechanical energy. The Chevrolet Tracker is equipped with a 1.3-liter inline three-cylinder turbocharged engine across all variants, paired with either a CVT continuously variable transmission or a 9-speed automatic transmission. It delivers a maximum power output of 121 kW (165 horsepower) and a peak torque of 240 Nm. The Tracker offers two drivetrain configurations: front-wheel drive and on-demand all-wheel drive. The front suspension features a MacPherson strut independent setup, while the rear suspension utilizes a torsion beam non-independent design.

9

0

Share

What is the normal mileage displayed on the odometer when purchasing a new car?

When purchasing a new car, it is normal for the odometer to display between 0 and 100 kilometers. Generally, new cars arriving at 4S dealerships will not show 0 kilometers because after the car leaves the production line, the manufacturer will have professionals conduct test drives and evaluations to identify any issues promptly. Additionally, during transportation from the manufacturer to the 4S dealership, the new car will undergo some movement. Methods to determine the actual mileage of the vehicle are as follows: 1. Check the vehicle's exhaust pipe: Wipe the inside of the exhaust pipe with a tissue when the engine is cold. Typically, the exhaust of a new car is relatively clean, whereas a used car's exhaust will be blackened like coal. 2. Inspect the vehicle's chassis: If possible, request to lift the vehicle and check the chassis for any wear or scratches. High-speed driving may cause damage from flying gravel, and driving over rough roads might lead to bumps. If a lift is unavailable, you can also look from underneath the car. 3. Examine the vehicle's tires: New car tires usually have noticeable tread hairs on the surface. If the tread hairs are intact, the car's mileage is within the normal range.

2

3

Share

Does BMW Antifreeze Need to Be Diluted with Water?

BMW antifreeze needs to be diluted with water, and it can be mixed at a ratio of 1:1. This is because the original BMW antifreeze concentrate is a glycol-based antifreeze with a high ethylene glycol content, accounting for over 90%. When the concentration of ethylene glycol liquid is below 66%, its freezing point decreases as the concentration increases. However, when the concentration exceeds 66%, the freezing point increases with higher concentration. Here are some precautions for using antifreeze: 1. Try to use the same brand of antifreeze. Different brands of antifreeze use different metal corrosion inhibitors, so they should not be mixed. 2. Most antifreeze products have a validity period of two years. When adding antifreeze, ensure the product is within its validity period. When replacing antifreeze, drain the old liquid completely, clean the cooling system thoroughly, and then add the new liquid. 3. Avoid diluting with water. Traditional inorganic antifreeze should not be diluted with water, as it can cause sedimentation and severely impair the antifreeze's normal function. Organic antifreeze can be diluted with water, but the amount of water should not be excessive. 4. For vehicles using antifreeze, never directly add tap water. Instead, use distilled or deionized water. If these are not available, boiled and cooled water is better than tap water. If antifreeze is lost due to leakage, replenish it with the same brand of antifreeze. Antifreeze should be used year-round.

12

1

Share

How to Install the Generator Belt for Cadillac XT5?

First, loosen the generator fixing screw and the belt tension adjustment screw of the Cadillac XT5. Push the generator towards the engine to minimize the distance between the pulleys, then place the belt in position and align it. Finally, adjust the belt tension to the appropriate level and tighten the engine fixing screw and the adjustment screw. Below are the situations when the generator belt needs to be replaced: 1. When inspecting the belt, if you find defects such as core breakage or groove section cracking, it should be replaced immediately. 2. When the belt's cover layer separates from the cord or the cord frays, the belt must be replaced. 3. When the belt is placed on the pulley, there should be a gap between the inner diameter of the belt and the bottom of the pulley groove. If there is no gap, the belt must also be replaced.

2

Share

How to Use Clutch and Brake When Going Downhill?

How to use clutch and brake when going downhill depends on the road conditions: 1. If the slope is very slight and short, you can simply use the brake to control the speed; 2. If the slope is steep and long, you should shift to a lower gear in advance to utilize engine braking for speed control, while also applying the brake to assist in deceleration. More relevant information is as follows: 1. When going downhill, pay attention to checking the braking performance to eliminate potential safety hazards. Before descending, ensure the vehicle enters the downhill section at a controllable speed and shift to an appropriate lower gear based on the slope. 2. Regardless of the slope size, coasting in neutral is not recommended. Properly utilize engine braking to reduce the vehicle's inertial speed. It's advisable to use intermittent braking on downhill sections. If the slope is too long, find a suitable place to stop midway and check the temperature of all four wheels.

6

0

Share

Is the 2019 Nissan Sylphy compliant with China VI emission standards?

Do Snow Tires Require Anti-Slip Chains?

Is the Chevrolet Tracker Equipped with a Three-Cylinder Engine?

What is the normal mileage displayed on the odometer when purchasing a new car?

Does BMW Antifreeze Need to Be Diluted with Water?

How to Install the Generator Belt for Cadillac XT5?

How to Use Clutch and Brake When Going Downhill?

What does AUTO mean in car air conditioning?

How to Know When to Replace Your Brake Pads?

Can Snow Tires Be Used on Highways?

How to Connect Bluetooth in Chevrolet Cavalier?