···
Log in / Register

Is the 2019 Magotan compliant with China 6 emission standards?

4 Answers
McCayden
09/05/25 3:02am

The 2019 Magotan has some models that meet the China 6 emission standards, while others comply with the China 5 standards. The Magotan is a mid-size sedan under the Volkswagen brand, featuring a dignified and elegant exterior design, along with a well-crafted interior. The 2019 Magotan measures 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2812mm. The advantage of its long wheelbase gives the Magotan a passenger space that surpasses mainstream B-segment sedans, with an effective interior space of 1897mm. The Magotan is powered by a 1.8TSI engine, which perfectly combines turbocharging technology with gasoline direct injection technology, enabling it to deliver high power and torque characteristics.

Was this review help?
19
4
Share
DelAnthony
09/17/25 3:41am

The 2019 Magotan does have a China 6 version, but it depends on the specific model and production date. I drove my friend's 2019 330 Luxury version, which he bought in Shanghai. The salesperson clearly stated it was China 6b at that time. Later, I found out from research that Volkswagen switched to China 6 nationwide after July 2019, but cities like Beijing, Shanghai, Guangzhou, and Shenzhen started implementing it earlier in early 2019. So the key is to check the vehicle conformity certificate – the emission standard section on the third page will indicate whether it's China 5 or China 6. Here's a little trick: open the engine hood and check the nameplate; vehicles produced after June 2019 are mostly China 6. Different engine displacements may also vary – the entry-level 280 version might have upgraded its emissions half a year later than the 380 version. If you're buying a used car, be sure to verify the original vehicle inventory list. I've seen people get burned on this before.

Was this review help?
20
5
Share
Expand All
HarleyRose
10/31/25 4:12am

The China 6 compliance issue for the 2019 Magotan varies by region. I've studied the emission standard timeline - while China 6 was officially implemented nationwide in July 2019, key regions like Beijing-Tianjin-Hebei and Yangtze River Delta started pilot programs as early as late 2018. Taking Beijing as an example, most Magotans registered in 2019 meet China 6b standards. Some southern cities adopted the standards 2-3 months later. The simplest verification method is checking the vehicle registration certificate (green book), where the emission standard is clearly printed. If the green book isn't available, the 10th digit of the VIN being 'K' indicates 2019 production - you can contact the local DMV to confirm the specific emission level. Actually, there's significant difference between China 6a and 6b, with 6b having much stricter particulate matter limits. Volkswagen equipped particulate filters on all high-trim 2019 models at that time.

Was this review help?
2
4
Share
Expand All
Levi
12/14/25 4:21am

When I was buying a used car, I specifically researched the 2019 Magotan. This model started upgrading to China 6 emission standards in batches from the second quarter of 2019, with many early-produced 330TSI Leading versions still being China 5. The facelifted models launched later were basically all China 6 compliant. The most reliable way to check emissions is through the vehicle's environmental information document in the glove compartment. The first three digits of the VIN (LFV) represent FAW-Volkswagen, and the seventh letter indicates the trim level. China 6 compliant cars have a carbon canister sensor near the exhaust pipe, which China 5 cars lack. Nowadays, checking emissions is convenient - just search for the 'Motor Vehicle Environmental Protection Network' mini-program on WeChat and enter the VIN to get the results.

Was this review help?
10
1
Share
Expand All
More Forum Discussions

What Causes the ABS Light to Illuminate in Hyundai Vehicles?

ABS light illumination can occur in various states, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly illuminated (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the vehicle's speed signal. This prevents the ABS computer from determining the speed and wheel slip rate, thus failing to issue appropriate commands for brake adjustment. Solution: Clean the dirt from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wires or poor contact in the ABS relay lead to signal issues, causing system failure. Solution: Inspect wire connections and reattach any loose ones. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As engine speed increases, voltage rises, and the ABS light turns off. This may also occur due to insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connector. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between rear and front wheel speed signals during high-speed driving. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, typically listed on the sticker near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage fully downward, then release the pedal to complete self-positioning. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, locked wheels can cause the vehicle to skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
14
4
Share

What Causes the Engine Warning Light to Illuminate in a Golf?

There are primarily 7 reasons for the engine warning light to illuminate: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen levels, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and oil specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor combustion of air-fuel mixture: This can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Causes include faulty spark plugs, ignition coils, fuel pump issues, or clogged fuel lines. Turbocharging problems: Issues with the intake boost piping or turbocharger can trigger the warning light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black exhaust smoke. Air intake issues: Obstructions in the engine's air intake system may cause the warning light to activate, especially if the air filter is dirty and not regularly cleaned. Exhaust system faults: Problems like faulty rear oxygen sensors, catalytic converter issues, or exhaust camshaft and bearing failures can illuminate the warning light. The catalytic converter is particularly vulnerable to damage from leaded gasoline, certain lubricant additives, physical impacts, or fuel system malfunctions. Anti-theft system failure: If the vehicle's electronic anti-theft system malfunctions or doesn't properly communicate with the engine control unit, it may prevent normal engine operation and trigger the warning light. When the engine warning light illuminates, follow these steps: First, check if the engine is operating normally. If there's noticeable shaking, black smoke, or other abnormalities - especially if the light is red - do not restart the engine. If the engine can be started, turn it off and wait 5-10 minutes. Then, without pressing the brake (or clutch for manual transmissions), activate the ignition to the ON position to initiate the self-check function. After 5-10 seconds, observe if the warning light turns off. If the light remains on, promptly visit a service center. Technicians can use diagnostic tools to read trouble codes and perform targeted repairs.
1
3
Share

Where is the location to add windshield washer fluid in a sedan?

The location to add windshield washer fluid in a sedan is within the engine compartment. The specific position and method for adding are as follows: 1. If you need to add windshield washer fluid, first open the engine hood, then locate the windshield washer fluid reservoir. The reservoir has a cap, which is usually blue in color and marked with a windshield washer symbol. Open this cap to add the windshield washer fluid. 2. Windshield washer fluid has the function of cleaning the windshield and is typically blue in color. It contains cleaning agents that can remove stains from the windshield. Some vehicles are equipped with a headlight cleaning system, which also uses windshield washer fluid.
19
0
Share

What does DSC mean?

DSC refers to the Dynamic Stability Control system, whose functions are: 1. Optimizing driving stability during starting or acceleration; 2. Improving traction characteristics; 3. Identifying unstable driving conditions, such as understeer or oversteer, to help the vehicle maintain a safe driving direction. The working principle of DSC is: sensor technology is responsible for monitoring wheel speed, lateral acceleration, and yaw rate. This data is processed to obtain information about the vehicle's current movement state, and these data are compared with the data provided by the accelerator pedal and steering wheel angle about how the vehicle should currently move. If the two sets of data do not match, indicating that the vehicle's stability is threatened, DSC will activate and influence the braking system and engine management unit.
18
3
Share

Where is the battery jump-start location for the Audi Q7?

Audi Q7 battery jump-start location is in the engine compartment. Open the hood, and you will see a red cover on the battery with a plus sign indicating the positive terminal. Connect the red jumper cable to the red post, and connect the other end of the red jumper cable to a metal part of the car engine, which serves as the negative terminal. The Audi Q7 is a mid-to-large SUV that emphasizes comfort, with body dimensions of 5069mm in length, 1968mm in width, and 1716mm in height, and a wheelbase of 3001mm. This model is available in two versions: a 5-seater and a 7-seater.
15
5
Share

What are the symptoms of a burnt car clutch plate?

The symptoms of a burnt car clutch plate are: 1. Reduced power: The engine's power output is transmitted to the gearbox through the clutch. When the clutch is burnt, the clutch plate will slip, naturally reducing power; 2. Metallic friction sound: The friction surface of the clutch plate is fixed with rivets. Burning the clutch will wear out the friction surface, causing the rivets to come into contact with the flywheel, resulting in a metallic friction sound when engaging or disengaging the clutch; 3. Changed clutch pedal travel: Burning the clutch thins or eliminates the friction surface, altering the clutch pedal's travel; 4. Gearshift jerking: The clutch plate contacts the flywheel. When the clutch is burnt and the rivets are exposed, there will be a strong jerking sensation during gear shifts.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.