Is the 2019 Corolla a Three-Cylinder or Four-Cylinder?

How to Set Auto Lock for Civic?

Civic's auto lock setting method is to shift to D gear and step on the accelerator. For base models, the auto lock function is not available. The auto lock while driving, also known as speed-sensing auto lock, is an electronic device that automatically presses the door lock button when the vehicle reaches a preset speed, preventing accidental door opening. Features of auto lock: 1. Anti-theft, locks quickly after driving; 2. Prevents door pulling during traffic jams or at red lights; 3. Protects children inside by preventing them from opening doors while moving. The Civic is a compact car launched by Honda, featuring a water-cooled four-stroke inline four-cylinder 16-valve engine, with MacPherson strut front suspension and multi-link independent rear suspension.

19

2

Share

How Often Should the Four Supporting Components Be Replaced?

The four supporting components should be replaced every 5-8 years. Below is an introduction to the break-in process after replacing the four supporting components, following the procedure for a new car: 1. For the first 1,000 km or so: Keep the speed below 60 km/h, warm up the car for no less than 5 minutes before starting, and let the engine idle for 5 minutes before stopping. 2. From 1,000 to 2,000 km: Maintain a speed of 80 km/h, especially after exceeding 2,500 km, it is advisable to gradually increase speed for high-speed break-in, with the maximum limit being 110 km/h. 4. Around 3,500 km: Perform a comprehensive maintenance service, marking the end of the break-in period.

11

1

Share

What is the fuel consumption of the Passat hybrid if it is never charged?

Passat hybrid will have increased fuel consumption if it is never charged. The reasons are as follows: 1. Reason one: This car is positioned as a plug-in hybrid vehicle, which can operate in pure electric mode or use the engine to provide power. 2. Reason two: If it is used without charging, it will function like a conventional fuel-powered car, requiring gasoline to provide power, thus increasing fuel consumption. Information about plug-in hybrid vehicles is as follows: 1. Plug-in hybrid vehicle: A new energy vehicle that falls between pure electric vehicles and conventional fuel-powered cars. 2. Advantages: Plug-in hybrid vehicles have larger battery capacities, allowing for longer driving ranges. If used for short trips and with good charging conditions, plug-in hybrid vehicles can operate without refueling, functioning like pure electric vehicles and offering the advantages of pure electric cars.

6

2

Share

Does DM-i Have a Transmission?

DM-i does not have a transmission. The reasons are as follows: 1. Technology: The Super Hybrid System technology innovatively prioritizes electric power, completely eliminating the need for a transmission. 2. Power source: At low speeds, the vehicle is driven by the electric motor, while at high speeds, the engine directly drives the vehicle. Information about DM-i is as follows: 1. Advantages: The engine's role is to charge the battery when power is low and rest when power is sufficient. This eliminates the need for a transmission while achieving extremely low fuel consumption. 2. Models: Qin PLUS DM-i, Song PLUS DM-i, and Tang DM-i all have significantly lower fuel consumption per 100 kilometers compared to traditional fuel-powered vehicles.

2

Share

How far can you drive with a tire pressure of 60?

A tire pressure of 60 bar indicates severe underinflation and should not be driven on, as it can lead to tire damage and traffic accidents. According to the international GBT2978-2008 standard, the recommended tire pressures are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Hazards of overinflated tires: Reduced friction and grip, affecting braking performance; Causes steering wheel vibration and misalignment, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan. Hazards of underinflated tires: Increased friction with the road surface, leading to higher fuel consumption; Makes steering heavy and prone to misalignment, compromising driving safety; Increases movement in various parts of the tire, causing abnormal heat due to excessive rolling.

5

1

Share

What Causes Car Shaking When Turning on AC and Braking?

Here are the specific reasons for car shaking when turning on the AC and braking: 1. Suspension system failure: The suspension system is primarily responsible for filtering engine vibrations during operation. If the suspension malfunctions, these vibrations will be directly transmitted to the steering wheel and cabin, affecting driving. 2. Unstable oil pressure: If the engine carbon has been cleaned, the throttle valve has been washed, and the oil pad has been replaced, but the car still shakes, it is recommended to check the fuel supply pressure and the intake pressure sensor at a repair shop. Abnormal fuel pump supply pressure or incorrect intake pressure sensor values can cause the car to shake. 3. Cold start: The main reason for car shaking during a cold start is insufficient fuel combustion, leading to reduced car power. Low ignition energy means that during startup, when the temperature of fuel and lubricating oil is low, more fuel is needed to meet power demands. Over time, the spark plug gap gradually increases, leading to decreased ignition energy and poor fuel atomization, resulting in car shaking.

2

1

Share

Is the 2019 Corolla a Three-Cylinder or Four-Cylinder?

How to Set Auto Lock for Civic?

How Often Should the Four Supporting Components Be Replaced?

What is the fuel consumption of the Passat hybrid if it is never charged?

Does DM-i Have a Transmission?

How far can you drive with a tire pressure of 60?

What Causes Car Shaking When Turning on AC and Braking?

What Engine Does MG Use?

What is the purpose of flashing a car's ECU?

What is the horsepower of the Civic Type R?

Where should you not drive through water?