Is the 10th Generation Accord Driving Cabin Noisy?

What is the safety standard for brake disc thickness?

The safety standards for brake disc thickness are as follows: Mechanical performance requirements: Tensile strength >=206MPa, bending strength >=1000MPa, deflection >=5.1mm, hardness should be between 187~241HBS. Additional information: 1. Brake disc classification: (1) Structurally, there are solid brake discs and ventilated discs. Solid brake discs are simply metal discs used for braking without any special construction. Ventilated discs come in two forms: slotted discs and drilled discs. Both treatments aim to improve the cooling performance of the brake disc, reduce thermal fade, and provide better braking capability. (2) By material, they are divided into carbon fiber ceramic brake discs and metal brake discs. 2. Brake disc selection: First, check whether the replacement brake disc is a genuine part, the integrity of the product packaging, whether the anti-counterfeiting marks and packaging labels match those on the brake disc, and whether the product model matches the content of the certificate. Brake discs produced by regular manufacturers have clearer packaging prints, including license numbers and execution standards, while the packaging box contains a certificate of conformity, production batch number, production date, etc.

14

3

Share

Where is the trunk switch of Volkswagen Jetta and how to open it?

You need to gently lift the trunk button to open it. Alternatively, you can also turn the switch with the key. Many models allow you to unlock the trunk directly from the key by pressing the trunk unlock button on the key. If the key is within the sensing range, you can directly pull the trunk handle and then lift the trunk lid. Some models have two additional buttons on the trunk. The left button is for closing the trunk, and the right button is for closing the trunk and locking the car.

2

Share

How to Check the Vehicle Annual Inspection System?

The first method is to check the annual inspection time on the duplicate of the motor vehicle owner's driving license. You can also check the annual inspection label posted on the windshield, which shows the year and month. First, you need to log in to the local traffic police website, enter the vehicle information inquiry, and input the license plate number and engine identification code (VIN) to check. You can directly bring your ID card, driving license, and other documents to the vehicle management office or the traffic violation processing hall for inquiry.

8

4

Share

Can fog lights be installed on a car?

Fog lights can be installed on a car, and the installation method is as follows: 1. Locate the reserved position for the fog lights and secure them in place; 2. Refer to the circuit diagram to connect the fog light wiring; 3. Add a fuse to complete the installation. Front fog lights are used to illuminate the road and provide safety warnings during rainy or foggy weather, thereby improving visibility for the driver and other traffic participants. Important precautions for using fog lights include: 1. Fog lights must be turned on and speed must be reduced when visibility drops below 100 meters; 2. If visibility is below 30 meters, turn on the fog lights, pull over to the side of the road, and activate the hazard warning lights; 3. In conditions of rain, fog, snow, or dust, turn on the fog lights and reduce speed.

11

5

Share

How to turn off the always-on brake light of Dongfeng Fengguang 580?

Check if the brake pads have worn to their limit and replace them immediately if necessary. The brake light switch can be adjusted; remove the switch, adjust it, and then reinstall it. If the brake switch is damaged (it is located above the brake pedal), repair the switch. Check if the brake fluid is low and replenish it immediately if needed. Inspect whether the brake light bulb is damaged.

16

0

Share

What to Do When the Sunroof Won't Close?

The solutions for a sunroof that won't close are: 1. Open the cover next to the sunroof switch; 2. Use the tool inside the cover to close the sunroof. The maintenance methods for the sunroof are: 1. Before opening the sunroof, check for obstacles on the roof that may hinder the movement of the glass panel; 2. Regularly clean around the sliding rails to prevent sand accumulation and extend the lifespan of the sunroof seal; 3. Periodically use oil or lubricant to clean the mechanical parts of the sunroof. The reasons why the sunroof won't close are: 1. The sunroof drive motor is damaged; 2. There is a fault in the sunroof wiring; 3. The sunroof rails are obstructed by foreign objects, preventing normal closure; 4. Lack of lubrication in the sunroof tracks, causing the sunroof seal to stick to the car body.

8

2

Share

Is the 10th Generation Accord Driving Cabin Noisy?

What is the safety standard for brake disc thickness?

Where is the trunk switch of Volkswagen Jetta and how to open it?

How to Check the Vehicle Annual Inspection System?

Can fog lights be installed on a car?

How to turn off the always-on brake light of Dongfeng Fengguang 580?

What to Do When the Sunroof Won't Close?

What Are the 13 Hidden Functions of the Camry?

Does Replacing the Windshield Affect Resale Value?

What to Do When Engine Noise Increases After an Oil Change?

What is the low coolant level warning light icon?