Is the 10th Generation Accord China 5 or China 6 Emission Standard?

1 Answers
StLandon
07/30/25 9:29am
The 10th Generation Accord complies with the China 5 emission standard. Below are relevant details about the 10th Generation Accord: 1. Currently, the Accord is equipped with three engine options: a 2.0L, a 2.4L, and a 3.0L V6 naturally aspirated engine. 2. The 2.0L and 2.4L engines are paired with a CVT transmission, while the 3.0L engine comes with a 6-speed automatic transmission. 3. GAC Honda offers a 3-year or 100,000-kilometer vehicle warranty for the Accord. The Accord features the latest GAC Honda family design language, with LED headlights that provide better visual effects and enhanced safety during nighttime driving.
Was this review help?
20
2
Share
More Forum Discussions

What brand is the original engine oil for Beijing Hyundai?

The original engine oil brand for Beijing Hyundai is Mobis. For later maintenance and oil changes, options include ordinary Great Wall 5W20, South Korean SK's 5W30, and Shell's premium engine oil. The original API-SM/GF-4-SAE-5W-20 engine oil for Beijing Hyundai needs to be replaced every 5,000 kilometers. The Beijing Hyundai Tucson is equipped with a 1.6 turbocharged engine, which requires 5W-30 full synthetic engine oil for maintenance. The Hyundai 4S directly supplies the original premium gasoline engine oil A5, 5W-30 (4L pack), suitable for the entire range of Langdong, Mistra, Elantra, IX35, Tucson, Verna, Santa Fe, and Sonata. The viscosity of engine oil changes with temperature, so special attention is needed to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C, with higher values indicating better viscosity retention at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing engine oil in Beijing Hyundai vehicles is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug, catching the old oil in a pan until no more oil flows. Start the engine for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the filler cap on the engine valve cover, generally filling up to three-quarters of the bottle; Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If any leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.
14
1
Share

What is the difference of Tayron R-Line?

Tayron R-Line is a model equipped with the R sports package, which includes components such as wheels, front and rear bumpers, side skirts, steering wheel, etc. Models equipped with the R sports package are referred to as R-Line versions. The Tayron is a mid-size SUV under the Volkswagen brand, and it comes with three engine options: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine. All three engines are paired with a 7-speed dual-clutch transmission. Below is an introduction to the engines equipped in the Tayron: 1. Tayron's 1.4-liter turbocharged engine: This engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm. It achieves maximum power output at 5,000 to 6,000 rpm and maximum torque output at 1,750 to 3,000 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. Low-power 2.0-liter turbocharged engine: This engine delivers a maximum power of 137 kW and a maximum torque of 320 Nm. It achieves maximum power output at 5,000 rpm and maximum torque output at 1,600 to 4,000 rpm. The engine features hybrid injection technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. 3. High-power 2.0-liter turbocharged engine: This engine delivers a maximum power of 162 kW and a maximum torque of 350 Nm. It achieves maximum power output at 4,500 to 6,200 rpm and maximum torque output at 1,500 to 4,400 rpm. The engine uses an aluminum alloy cylinder head and a cast iron cylinder block.
10
3
Share

Is it possible not to install ETC?

It is possible not to install ETC. According to Article 19 of the "Notice on Vigorously Promoting the Development and Application of ETC on Highways" issued by the State Council, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual channels. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated before normal use. During free holiday periods, vehicles with ETC can still use the highways, and for users who have already installed ETC, passing through ETC lanes will not incur charges. ETC Deduction Principles: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with banks, the system achieves the purpose of vehicles not needing to stop at toll stations to pay fees. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, reducing wear and fuel consumption; Improved efficiency: Theoretically, ETC lanes can increase vehicle throughput efficiency by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also explicitly set the goal in the "13th Five-Year" comprehensive transportation development indicators that "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC usage rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. The integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation development directions will be explored to provide comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications.
4
3
Share

How to deal with a sesame-sized paint chip on the car door?

To prevent rusting on the exposed metal area, you can purchase a touch-up pen matching your car's color and apply it yourself. If there is significant paint chipping and noticeable deformation on the door edge, it is recommended to visit a repair shop for panel beating and door repainting.
16
5
Share

How to Remove a Parking Space Stopper?

First, locate the specific position of the stopper on the vehicle. If it's a strong magnetic, no-installation GPS tracker, simply remove it after finding it. For wired trackers, follow the power cord carefully, cut it, and then remove the device.
5
2
Share

What to Do When Debris Falls into the Window Gap?

You can spray foam cleaner on the window track. Then raise and lower the window several times. After that, use high-pressure air to blow it out and clean it thoroughly. You will need a metal piece with sufficient hardness. Insert the metal piece into the window door gap and slide it from one fixed direction to the other.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.