Is the 1.6L engine of Changan Oushang X5 a Blue Core engine?

1 Answers
SanMaddox
07/29/25 6:51pm
The 1.6L engine of Changan Oushang X5 is not a Blue Core engine. According to the data provided by Changan's official website, the 1.6L engine used in Changan Oushang X5 is the JL478QEP. This is a naturally aspirated engine with a maximum horsepower of 128, a maximum power of 94 kW, and a maximum torque of 161 Nm. The Blue Core engine, on the other hand, is a turbocharged engine, so the 1.6L engine used in Changan Oushang X5 is not a Blue Core engine. Here is the relevant introduction: The Changan Oushang X5 1.5T version is equipped with the Blue Core engine, with the engine model being JL473ZQ2-AE, paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 180, a maximum power of 132 kW, and a maximum torque of 300 Nm.
Was this review help?
5
1
Share
More Forum Discussions

What to Do When Water Leaks into the Car and Soaks the Floor Mats?

To address the issue of water leaking into the car and soaking the floor mats during rain, the first step is to identify the cause, fix it, and promptly clean and dry the water. Below are the common reasons for water leakage in cars during rain: 1. Sunroof Leakage: Many cars experience sunroof leaks as they age. Common issues include detached sunroof drain pipe connectors or aging plastic components in the sunroof drainage channel. These can cause leaks, with water flowing down to the floor mats. 2. Floorboard Perforation: Some car floorboards are positioned very low. Driving through water-filled potholes or uneven terrain, which may not be visible, often leads to water ingress. Many cars suffer from this issue, as the floorboard is relatively weak in most areas. 3. Detached Air Conditioner Drain Pipe: The car's air conditioner drain pipe is designed to expel condensation water outside the vehicle. If the pipe detaches or becomes clogged due to aging or blockages, the water may flow inside the car, typically ending up on the floor mats.
15
2
Share

What are the new regulations for motor vehicle inspection?

Annual inspection adjustments are divided into two parts: private cars and freight vehicles, as detailed below: Private cars: 1. Added inspection step: The online inspection process for private cars now includes a 'safety defect recall' check. If a vehicle has safety issues subject to manufacturer recall, inspectors will notify the owner. 2. Clarified visual inspection scope: The new regulations specify and relax visual inspection standards, allowing modifications to grilles, running boards, roof racks, bumpers, and wheel hubs. Freight vehicles: 1. Newly added items: Three new inspection criteria for tread depth, wheel lifting devices, and wheelbase. 2. Removed items: Six obsolete criteria including noise, speedometer accuracy, suspension efficiency, fuel economy, power performance, and headlight alignment.
5
4
Share

Should You Shift to Neutral or Engage the Handbrake First When Parking a Manual Transmission Car?

When parking a manual transmission car, you should engage the handbrake first and then shift to neutral. The reasons are as follows: 1. Safety: Developing the habit of engaging the handbrake before parking increases safety. The handbrake works by clamping the rear brake discs, preventing the rear wheels from turning and stopping the car from moving due to external forces. 2. Stability: After engaging the handbrake, the car is secured, and shifting to neutral ensures the car won't move or stall when the engine is started. 3. Scenario: If you're on a slope and shift to neutral without engaging the handbrake first, forgetting to press the brake pedal could result in the car rolling away.
11
0
Share

What Do Beginners Need to Know When Refueling at a Gas Station?

Beginners should pay attention to the following points when refueling: 1. Do not overfill the tank: In summer, high temperatures and the heat generated by the car itself can cause gasoline to expand. To prevent the fuel tank from being damaged due to the expansion of gasoline, there is a vent hole on top. 2. Try to avoid waiting until the fuel light comes on to refuel: While driving, always monitor the fuel gauge. When the gauge shows a quarter of the fuel remaining, it's time to refuel. Do not wait until the fuel light comes on. Modern cars use electric fuel pumps that require gasoline for lubrication and cooling. Frequently waiting until the fuel light comes on to refuel can result in poor lubrication and cooling of the fuel pump, ultimately reducing its lifespan.
2
2
Share

Does the Car Fuel Injector Need to Be Replaced?

The fuel injector generally does not need replacement under normal circumstances; cleaning is sufficient. It is typically recommended to clean it every 2 years or every 50,000 to 80,000 kilometers. Below is relevant information about car fuel injectors: 1. Definition: A car fuel injector is a simple solenoid valve. When the solenoid coil is energized, it generates a magnetic force that lifts the needle valve, opening the injection hole. Fuel is sprayed at high speed through the annular gap between the needle valve's tip and the injection hole, forming a fine mist that facilitates complete combustion. 2. Impact: As one of the key components of an electronic fuel injection engine, the performance of the fuel injector significantly affects the engine's overall performance. Carbon deposits inside the engine may accumulate on the injector, or impurities in the fuel may clog the injector's pathways. After driving for a certain period, deposits will inevitably form in the fuel system.
14
2
Share

How to use the TEMP button on the car air conditioner?

TEMP stands for temperature, which means the degree of hotness or coldness, ambient air temperature, or body temperature, and high fever in some contexts. In vehicles, TEMP refers to the temperature setting function. By pressing the corresponding button, you can adjust the air conditioning temperature. The TEMP button is generally located on the air conditioning control panel. In some car models, TEMP may also be displayed on the instrument panel, indicating the outside temperature (which may have a slight difference from the actual temperature). Relevant information about the car instrument panel is as follows: 1. Introduction: The instrument panel, also known as the instrument-panel, is a rigid flat plate or structural component used for installing instruments and related devices. It can be categorized into screen-type, frame-type, channel-type, and cabinet-type instrument panels based on their design. 2. Function: The instrument panel can be equipped with external lighting and may include an attached control console. It comes in various forms and specifications, allowing for the installation of different instruments as needed. Additionally, multiple instrument panels can be combined into a single unit according to requirements.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.