Is the 1.5T power of the Avancier really good?

1 Answers
MacEmma
07/30/25 4:55am
The 1.5T power of the Avancier is quite impressive. Here are some relevant introductions about the Avancier: 1. Power unit: Equipped with a 2.0T direct-injection turbocharged engine, with a maximum power of 272 horsepower and a maximum torque of 370 N·m. In terms of the transmission system, the 2.0T engine is paired with a 9-speed automatic transmission. 2. Exterior design: Honda's design concept that transcends the times is fully reflected in the Avancier's appearance. The overall style is majestic and bold, combining strength and beauty. The wide front grille, eagle-wing LED headlights, and bold body lines highlight its uncompromising and sharp character.
Was this review help?
2
2
Share
More Forum Discussions

What is the fuel consumption of Dongfeng Mengshi?

Dongfeng Mengshi has an average fuel consumption of 11.3L per 100 kilometers, but the actual fuel consumption may vary depending on usage. Here are some tips to reduce fuel consumption: 1. Regular vehicle maintenance: Proper adjustment and maintenance affect engine performance and driving resistance. Poorly maintained engines can increase fuel consumption by 10% to 20%. Owners should regularly visit repair shops for routine maintenance, such as checking tire pressure, wheel alignment, adjusting brake pad and drum clearance, lubricating chassis components, timely oil changes, and filter inspections. 2. Avoid prolonged engine idling: Idling consumes significantly more fuel than normal driving. Therefore, if the vehicle is stationary for extended periods (e.g., waiting for someone), it's best to turn off the engine. During cold starts, warm up the engine for no more than 1 minute and maintain low-speed driving for a few minutes. 3. Correct fueling: Higher-octane fuel isn’t always better. Using fuel with an inappropriate octane rating can lead to incomplete combustion, higher fuel consumption, unstable engine operation, and even damage to the engine or other critical components. 4. Avoid sudden braking and acceleration: Smooth and steady driving is the most fuel-efficient. During acceleration, avoid slamming the throttle. Instead, accelerate smoothly and maintain a constant speed once the desired speed is reached.
7
0
Share

What Causes Air in the Radiator?

The presence of air in the radiator is caused by wear and tear on components such as piston rings and cylinder liners. Below are the specific reasons for air in the radiator: 1. Wear of piston rings and cylinder liners: When components like valves, piston rings, and cylinder liners wear out, it leads to insufficient compression pressure and oil entering the combustion chamber. This alters the normal air-fuel mixture ratio at the end of the compression stroke, causing fuel to burn under oxygen-deficient conditions. This combustion process tends to produce carbon deposits, resulting in exhaust gases with thick black smoke. 2. Changes in combustion chamber shape: The shape of the combustion chamber can degrade due to manufacturing quality or prolonged use, leading to excessive or insufficient compression clearance or incorrect piston positioning. These changes affect the combustion chamber's shape and volume, thereby impairing the quality of the air-fuel mixture and worsening combustion conditions. 3. Excessive fuel supply: An oversupply of fuel increases the amount of oil entering the cylinder, creating a fuel-rich and air-lean condition that results in incomplete combustion. Additionally, excessive workload, low-quality fuel, and low operating temperatures can also cause black smoke in the exhaust.
9
0
Share

What does Tesla Plaid mean?

Tesla Plaid means the following: Tesla Plaid is Tesla's latest power system, a new prototype all-battery electric sedan Model S launched by Tesla, which has three motors and a brand-new Plaid power system. The following is an introduction to the new Tesla Model S Plaid car: 1. In terms of wind resistance: The body of the new Tesla Model S Plaid car is an updated version of the Model S car, with a drag coefficient of only 0.208Cd. 2. In terms of interior: The interior has been fully upgraded in this facelift. Under the new interior design language, it retains the full LCD instrument panel, combined with the horizontal large screen on the center console, adopting an overall horizontal layout. The size of the center console screen reaches 17 inches, with a resolution of 2200x1300, improved brightness and color fidelity, shorter response time, and the large screen can adjust the left and right tilt angles. 3. In terms of power: The new Tesla Model S Plaid model is equipped with three motors and excellent aerodynamic kits to achieve strong acceleration performance. The new model has a peak power of 1020 horsepower, a top speed of 322 km/h, and a range of up to 628 kilometers. It also has the strongest automatic assisted navigation driving, automatic assisted lane changing, automatic parking, and summon function.
7
1
Share

Does an Automatic Transmission Car Need Water in Its Radiator?

An automatic transmission car does not need water in its radiator. Here are some additional details: 1. The role of the car radiator: If the radiator doesn't leak, it may not need water for the entire year, but regular checks are necessary. New cars usually don't require additional coolant in the radiator, and if needed, only radiator fluid or antifreeze should be added. The car radiator, also known as a heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to circulate, thus regulating temperature. 2. The radiator: The radiator should not come into contact with any acid, alkali, or other corrosive substances. It is recommended to use soft water; hard water should be softened before use to prevent internal clogging and scale buildup in the radiator. When using antifreeze, to prevent corrosion of the radiator, always use long-lasting rust-proof antifreeze produced by reputable manufacturers and compliant with national standards.
12
0
Share

What does a four-lock off-road vehicle mean?

Four-lock off-road vehicles refer to off-road vehicles equipped with four differential locks. A differential lock is a technical term that refers to locking the differential housing and the axle shaft into one unit when one drive wheel slips, causing the differential to lose its differential function and transferring all torque to the other drive wheel. Here are the specific details: 1. Transfer case achieves "center differential lock": Off-road vehicles use a professional electronically controlled part-time four-wheel drive system. The transfer case in this system can achieve a rigid connection between the front and rear axles, equivalent to an enhanced version of a "center differential lock." 2. Front and rear differential locks: Both the front and rear axles are equipped with electronically controlled differential locks, which can achieve rigid connections between the two half-shafts when the vehicle encounters slipping or cross-axle situations, providing equal power to both wheels. 3. The best differential lock: Short axles are widely recognized in the off-road community as the "best differential lock." Leveraging the inherent advantages of short axles, off-road vehicles can achieve greater longitudinal approach angles, reducing the likelihood of getting stuck, which is equivalent to having an additional short axle lock.
7
1
Share

How Long Can a BMW 3 Series Run After Suddenly Prompting to Add Coolant?

Generally, it's not a big problem for one or two kilometers, but you should drive at a low speed. It's best not to continue driving. If the engine burns out, repairs can be expensive and troublesome. In an emergency, you can add purified water or tap water as a substitute and replace it with antifreeze later. Here are the precautions when using antifreeze: 1. Try to use the same brand of antifreeze: Different brands of antifreeze use different metal corrosion inhibitors, so antifreeze of different brands should not be mixed. 2. Validity period: The validity period of antifreeze is mostly two years. When adding, make sure the product is within the validity period. When replacing, drain the old liquid, clean the cooling system thoroughly, and then add new liquid. 3. Avoid diluting with water: Traditional inorganic antifreeze should not be diluted with water, otherwise it will produce precipitation, seriously affecting the normal function of the antifreeze. Organic antifreeze can be diluted with water, but not excessively. 4. Supplement: For vehicles using antifreeze, never directly supplement with tap water. Distilled water or deionized water should be added instead.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.