Is Tesla Overhyped?

Which is Better: Wet or Dry Dual Clutch?

Dry dual clutch and wet dual clutch have similarities as well as differences. Of course, it's not to say that one is better than the other, as each has its own advantages and disadvantages. Below are the differences between the two: 1. Dual clutch transmissions are divided into dry dual clutch transmissions and wet dual clutch transmissions. Whether dry or wet, the transmission principles are basically the same, with two clutches taking turns to work. 2. However, the connection medium between the clutch's driving plate and driven plate differs. The dry dual clutch relies on air. The clutch plates of a dry dual clutch directly contact the engine flywheel. Due to poor heat dissipation, dry dual clutches are prone to high temperatures in congested urban areas, even risking clutch plate burning. In this regard, wet dual clutch transmission technology is more mature. 3. The wet dual clutch relies on oil. Wet dual clutch plates are immersed in transmission oil. In terms of technological maturity and reliability, wet dual clutches are more stable because the clutch plates operate in hydraulic oil, which provides some cooling effect. Wet dual clutches have a more complex structure and higher manufacturing costs, and their power transmission efficiency is not as high as that of dry dual clutches.

13

0

Share

How to Install an ETC Device?

ETC device installation process is as follows: Upon receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly illuminate. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is properly inserted into the OBU device. ETC installation positions: For small vehicles such as cars and minivans, the ETC card and OBU device should be installed in the upper middle section of the front windshield. For large vehicles like trucks and buses, the installation position is in the lower middle section. ETC installation requirements: height should be no less than 1.2 meters and no higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

5

1

Share

What are the causes of unstable idle speed?

Reasons for unstable idle speed in cars: 1. Intake manifold leakage: When unauthorized air, gasoline vapor, or exhaust gases enter the intake manifold, causing the air-fuel mixture to become too rich or too lean, leading to unstable idle speed. 2. Excessive carbon buildup in the throttle body: Too much carbon deposit in the throttle body and surrounding intake passages changes the cross-sectional area of the air passage, making it impossible for the control unit to precisely regulate idle air intake. This also results in an overly rich or lean mixture, causing unstable idle speed. 3. Faulty intake system components: There are many actuators in the engine's intake system, such as throttle motor, idle speed control stepper motor, duty cycle solenoid valve, air flow meter, intake pressure sensor, etc. Malfunctions or damage to these components can cause unstable idle speed. 4. Fuel system faults: Issues like clogged fuel injectors, blocked fuel filter, obstructed fuel pump screen, faulty fuel pressure regulator, or blocked return line can all lead to incorrect fuel injection, causing the mixture to be too rich or too lean, resulting in unstable idle speed. 5. Ignition system faults: Problems such as faulty ignition module, incorrect spark plug gap, eroded or damaged spark plug electrodes, or excessive resistance in high-voltage wires can reduce ignition spark energy or cause misfires, leading to erratic idle speed fluctuations.

13

1

Share

Which country produces Mitsubishi engines?

Mitsubishi engines are produced by China Shenyang Aerospace Mitsubishi Engine Co., Ltd., established in 1997. 1. Mitsubishi is a Japanese corporate group. 2. The predecessor of the Mitsubishi Group was the Tsukumo Shokai established by Yataro Iwasaki in Tosa Domain. 3. In 1870, Yataro Iwasaki took over the Nagasaki Shipyard operated by the Japanese government and renamed it Mitsubishi Shokai. In 1996, Mitsubishi Motors began cooperating with several Chinese companies. Initially, Mitsubishi partnered with Changfeng Motors to produce the Mitsubishi Pajero series. The Chinese military's Leopard off-road vehicles were improved based on the Mitsubishi Pajero during that time. With the rapid development of China's automotive market, Changfeng hoped for deeper cooperation with Mitsubishi, but to no avail. In 2006, Mitsubishi acquired a portion of Southeast Motors Group's equity, establishing Soueast Mitsubishi. However, Soueast Mitsubishi also struggled, with consistently low sales until GAC stepped in to merge with Changfeng in 2012, saving Mitsubishi. Currently, Mitsubishi operates in the Chinese market through Soueast Mitsubishi and GAC Mitsubishi.

10

5

Share

Does the 2019 Bora have front and rear anti-collision beams?

The 2019 Volkswagen Bora is equipped with both front and rear anti-collision beams. The front and rear anti-collision beams have the following advantages: Front anti-collision beam: The front anti-collision beam can protect many important components in the front of the car, thereby reducing the owner's repair costs. Rear anti-collision beam: The rear anti-collision beam can also protect the car body, preventing damage to the body structure. The Bora is a very classic compact sedan under the Volkswagen brand, and this model enjoys good sales and reputation in China. The 2019 Volkswagen Bora is equipped with two engines: one is a 1.5-liter naturally aspirated engine, and the other is a 1.4-liter turbocharged engine. The 1.5-liter naturally aspirated engine, compliant with the China VI emission standard, has a maximum power of 83 kW, a maximum torque of 145 Nm, a maximum power speed of 6,000 rpm, and a maximum torque speed of 3,900 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.

8

5

Share

What is the size of the Magotan's wheel rims?

The wheel rim size of the Magotan is 16 inches. The wheel rim is the central part of the wheel where the axle is installed, commonly referred to as the 'rim' or 'steel rim'. Wheel rims are prone to accumulating dirt, and if not cleaned for a long time, they may corrode and deform, leading to potential safety hazards. Wheel rims are divided into steel rims and alloy rims, with the differences as follows: 1. The main advantage of steel rims is their simple manufacturing process (usually using casting techniques, whereas alloy rims are typically produced using low-pressure casting), relatively lower cost, and strong resistance to metal fatigue. 2. Steel rims are heavier (the same rim made of steel is much heavier than one made of aluminum alloy), have greater inertial resistance, poorer heat dissipation, and are prone to rust. 3. Alloy rims are lighter in weight, have smaller inertial resistance, higher manufacturing precision, and less deformation at high speeds, which helps improve the vehicle's straight-line driving performance, reduces tire rolling resistance, and consequently decreases fuel consumption. 4. The thermal conductivity of alloy materials is about three times that of steel, providing better heat dissipation, which can have a positive effect on the vehicle's braking system, tires, and the thermal attenuation of the braking system.

19

1

Share

Is Tesla Overhyped?

Which is Better: Wet or Dry Dual Clutch?

How to Install an ETC Device?

What are the causes of unstable idle speed?

Which country produces Mitsubishi engines?

Does the 2019 Bora have front and rear anti-collision beams?

What is the size of the Magotan's wheel rims?

How to Turn on the Air Conditioning Cool Air in the X-Trail?

What is the difference between 1.4t and 2.0t displacement?

How to reset the tire pressure monitoring indicator on the Magotan?

What is the tire model used in the Volkswagen Santana?