···
Log in / Register

Is Subject 4 Divided into Morning and Afternoon Sessions?

4 Answers
DeVictoria
07/28/25 12:19pm
Subject 4 is divided into morning and afternoon sessions. Generally, the morning session starts around 9:00 AM, while the afternoon session begins at 1:00 PM or 1:30 PM. The specific session times vary by location. Below is relevant information about the Subject 4 exam: 1. Exam Duration: The Subject 4 exam lasts 45 minutes, the same as Subject 1, providing sufficient time to complete the test at a normal pace. 2. Retake Opportunity: Each Subject 4 exam session includes one retake opportunity. If a candidate fails the first attempt, they can ask the examiner to rescan their ID card for a retake. However, if the retake is also unsuccessful, the exam will be considered a failure. Upon passing Subject 1, candidates receive a Driving Skills Learning Certificate, valid for three years. Within this period, they can schedule the Subject 4 exam an unlimited number of times. Currently, most regions offer free retakes for Subject 4, though a few areas may charge a retake fee.
Was this review help?
4
4
Share
JulietteAnn
08/11/25 5:06pm
I think the arrangement for the Subject 4 test is actually quite flexible. When helping out at the driving school, I noticed many students asking about this. The test time can generally be scheduled for either the morning or afternoon session on the Traffic Management 12123 platform, depending on the arrangements of your local vehicle management office. Some places have more people in the morning, while the afternoon is relatively less busy. It's recommended to choose a time slot when you're in good condition, as Subject 4 tests knowledge on safe and civilized driving, which requires concentration. It's best to avoid peak hours to reduce waiting time. The scheduling is quite user-friendly, making it easier for everyone to balance work or personal life. Don’t stress, and go early to familiarize yourself with the environment.
Was this review help?
10
4
Share
Expand All
DeJasmine
09/28/25 6:45am
I took the subject four test in the afternoon session last time, and the whole process went quite smoothly. After registering through the driving school, I used a mobile app to schedule the time and chose the 2 PM slot because I'm usually busy with work in the morning and feel more alert in the afternoon. The test consisted of multiple-choice questions, and as long as the screen turned on and off properly, there were no issues. It felt great to receive the results immediately after the test. Remember to bring your ID card and test admission ticket. I recommend practicing a few times with the traffic rules app beforehand, and you should pass easily.
Was this review help?
13
1
Share
Expand All
JamesRose
11/11/25 8:38am
The fourth subject test (road safety knowledge) does not have fixed morning/afternoon schedules. The DMV flexibly arranges test sessions based on registration numbers - you can book either morning or afternoon slots. The key is to memorize essential safe driving knowledge, such as how to handle pedestrian crossings and emergency situations. This exam is crucial as it directly relates to daily driving safety. Reviewing the manual multiple times or practicing with official question banks will help you pass with ease.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

How to Read the Gauge on an Automotive Air Conditioning Pressure Meter?

The red indicator on an automotive air conditioning pressure meter represents the high-pressure side, while the blue one indicates the low-pressure side. The units for pressure values include kg/cm², MPa, kPa, and Psi. When the compressor is running, maintain the engine speed between 1500-2000 r/min and activate the air conditioning to engage the compressor. Typically, the low-pressure side should read around 150-250 kPa, and the high-pressure side should be approximately 1400-1600 kPa. Below is additional information regarding air conditioning system pressure: 1. The pressure in the air conditioning system is diagnosed using a manifold gauge set. The method involves connecting the high and low-pressure hoses of the gauge to the respective high and low-pressure service (charging) ports of the system. Set the air conditioning to the coldest setting and the blower speed to the highest. Enable recirculation mode, direct the airflow toward the face, and open all doors. 2. Operate the air conditioning system (ensure the engine maintains a steady speed, usually 1500 r/min, as using only idle speed may affect accurate fault diagnosis) and observe the gauge readings (for R12 or R-134a, normal operating pressures are: low-pressure side at 1.8–2.1 kgf/cm², high-pressure side at 12–14 kgf/cm² and 13–15 kgf/cm², respectively). If the readings fall outside these ranges, the air conditioning system is malfunctioning.
9
5
Share

What does TRIP-A mean on a car?

TRIP-A refers to the short-distance mileage, also known as the trip mileage. TRIP is an English word meaning short-distance mileage. The function of TRIP-A is to help users calculate the kilometers traveled for each trip, and it can also be used to calculate fuel consumption based on the trip mileage. You can long-press the reset button to clear and reset it to zero. More details are as follows: 1. TRIP-A and TRIP-B odometers can be switched. To reset, press the small black button on the right for about one second. There are no restrictions on using TRIP-A and TRIP-B odometers. 2. TRIP-A can be set to reset to zero each time you refuel to calculate fuel consumption; TRIP-B can be set to reset to zero for each maintenance interval, such as every 5,000 KM. It can also be used to calculate the average fuel consumption over a certain period (several refuels). 3. The total odometer records and displays the vehicle's total mileage, which is the distance traveled since the vehicle was put into use. The total mileage of a car varies depending on the type of vehicle. 4. For common passenger cars like family sedans, the normal lifespan is 15~20 years, and under proper maintenance, it can last 300,000~500,000 kilometers. For common commercial vehicles like container trucks, the normal lifespan is 10~15 years, with a mileage of 400,000~800,000 kilometers.
3
0
Share

Why is the car's one-button start not working?

Here are the reasons why the car's one-button start sometimes does not respond: 1. Check if the key is nearby, as the one-button start relies on key sensing. The car cannot start if the key is not present. 2. Verify if there was an operational error. If you only press the button without stepping on the brake, the car will power on, but the engine will not start. Another scenario is not holding the button long enough or not pressing it all the way down. 3. The gear is not in the P (Park) position. "Sensing issues": 1. Frequently placing the car key near electronic devices such as mobile phones, computers, or TVs may interfere with the low-intensity radio waves in the key. Alternatively, strong radio waves from nearby sources like TV towers, airports, or power plants can cause the one-button start to "fail." 2. The car key battery is low: If the remote control distance shortens or the sensing becomes less responsive, it indicates the car key battery is running low. In this state, the one-button start function will not work properly, and the battery should be replaced as soon as possible. 3. Car malfunction: In extreme cases such as fuel system issues, dead battery, or short circuits in electronic components, contact the 4S store staff directly.
5
4
Share

Is a Four-Wheel Alignment Necessary After Changing Tires?

Generally, a four-wheel alignment is required after changing tires. The functions of four-wheel alignment for vehicles: 1. Significant benefits for tires: After a four-wheel alignment adjustment, the tires can maintain the optimal angle with the vehicle body, ensuring both improved grip and comfort. 2. Enhanced handling: After a four-wheel alignment adjustment, driving control can be correspondingly ensured. In emergency situations, sufficient tire grip allows the vehicle to follow the driver's intended path as closely as possible. 3. Fuel savings: After a four-wheel alignment adjustment, the vehicle can travel along the correct path, reducing wind resistance to some extent and consequently lowering fuel consumption. 4. Ensured driving safety: During a four-wheel alignment adjustment, the condition of the vehicle's suspension system and other components is also checked. This inspection can determine whether the tires have any adverse effects on the chassis system.
19
4
Share

Can You Still Drive After the Car Overheats?

When the engine temperature is too high, you must stop the car immediately for inspection and must not continue driving. Otherwise, it can easily damage the engine, even requiring major repairs. To determine if the car is overheating, check three things: 1. The temperature gauge. 2. The temperature warning light. 3. Whether there is steam coming out. The temperature warning light should be given special attention because it is more noticeable and easier to see—it will light up first before the car overheats. Common reasons for overheating include: 1. Insufficient coolant. This should be checked first and is basically the only thing you can inspect yourself. If you are on the highway or in a remote area without coolant, you can temporarily use water as a substitute. 2. A dirty radiator. The radiator has many pores formed by cooling fins, which can easily accumulate debris, sludge, and other deposits, reducing airflow and cooling efficiency.
13
2
Share

Is Crystal Coating Harmful to Car Paint?

For a new car, crystal coating does not cause damage to the paint surface; however, for a car that has been used for some time, crystal coating can potentially harm the car paint. For a new car, crystal coating only requires deep cleaning of the paint surface, followed by mirror restoration, degreasing treatment, and then applying the crystal coating directly. Since the paint surface of a new car has fewer contaminants and almost no scratches, the process is relatively quick. For a car that has been used for some time, the paint surface must first undergo polishing, followed by mirror restoration, degreasing, and finally, the crystal coating application. Due to various environmental factors causing different degrees of damage to the vehicle, it is essential to remove any contaminants or scratches from the paint surface beforehand to ensure it is smooth, allowing the crystal coating to achieve the best results. Benefits of Crystal Coating: Scratch Resistance: The high hardness of diamond crystals prevents most minor scratches and possesses elastic recovery capabilities. Corrosion Resistance: The ultra-fine nano-crystal layer of diamond crystals isolates the paint surface from the external environment, effectively preventing oxidation and acid rain corrosion. No Cracking: Diamond crystals are resistant to UV rays, extreme temperatures, and strong temperature variations, preventing cracking or peeling. Easy Cleaning: The robust fiber network of diamond crystals fills the tiny pores on the paint surface, achieving a mirror-like effect, making it easier to clean and maintain. Anti-Static: Diamond crystals contain anti-static agents, reducing dust adhesion to the paint surface. Enhanced Shine: The crystal structure of diamond crystals, similar to that of diamonds, increases light refraction, resulting in a brighter and more translucent paint surface.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.