Is Study Required for a 6-Point Deduction on a Driver's License?

1 Answers
McAlina
07/30/25 9:30am
C1 and below driver's licenses do not require study for a 6-point deduction during the probationary period, while B2 and above driver's licenses require study for a 6-point deduction during the probationary period. Below are the conditions for applying for a motor vehicle driver's license: 1. Age: To apply for small cars, small automatic transmission cars, or light motorcycles, the applicant must be between 18 and 70 years old. 2. Vision: To apply for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other vehicle types, the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart.
Was this review help?
3
0
Share
More Forum Discussions

What Causes the One-Button Start/Stop Failure?

Reasons why the one-button start fails to stop the engine: 1. Key not detected: Sometimes strong nearby magnetic fields can interfere with key detection. Aligning the key directly with the one-button start should resolve this. 2. Battery issues: If the battery is dead or its voltage drops below 12V, pressing and holding the button can shut off the engine. 3. Gear position: Normally, shifting to P (Park) and restarting then stopping the engine will solve the issue. If the problem persists, contact a 4S dealership for professional assistance. Below is relevant information about one-button start: The one-button start system is part of smart car technology, featuring a simplified button mechanism for starting and stopping the engine. This device can be installed either by modifying the original key slot or as a separate panel installation.
1
4
Share

Principle of Gear Shifting in Sedans?

Gear shifting is achieved by changing the transmission gears. Here are the relevant details about gear shifting: 1. Gears: The drive shaft of the tires has gears of different gear positions. When the engine speed remains constant, engaging gears of different sizes (different gear positions) with the engine results in the larger gear obtaining a lower circumferential speed compared to the smaller gear. 2. Torque: According to the knowledge of torque, in low gear, the gear is larger, and the engine drives a larger radius with a smaller radius, allowing the car to obtain greater driving force. In high gear, the engine drives a smaller radius, resulting in a faster circumferential speed, meaning the car moves faster but with less torque, i.e., less driving force. Therefore, gear shifting in cars is essentially about changing the transmission gears.
16
1
Share

What is the small light next to the reading light called?

The small light next to the reading light is called the dim light. It can illuminate the gear area under low lighting conditions. The following are precautions for using vehicle lights: 1. Turn signals: When a motor vehicle passes through an intersection controlled by traffic lights and turns left or right, the corresponding turn signal must be turned on. 2. Low and high beams: Low beams should be turned on when driving at night, and should also be used when meeting non-motor vehicles on narrow roads or narrow bridges; high beams should not be used when a following vehicle is driving close to the vehicle in front in the same direction; when a motor vehicle passes through sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic light control at night, it should alternately use high and low beams to signal.
7
4
Share

Where is the speed sensor of Haval M4 located?

Haval M4 speed sensor is located inside the transmission housing. Function of speed sensor: The speed sensor is a very important sensor, which provides data for the speedometer on the dashboard. Moreover, the signal from the speed sensor must also be fed back to the ECU. The ECU adjusts the transmission gear, regulates the lock-up of the torque converter, controls the engine idle speed, manages the activation and deactivation of the cooling fan, and regulates the cruise control based on this signal. Function of wheel speed sensor: The wheel speed sensor is one of the most critical sensors, as it is related to driving stability, driving safety factors, and the vehicle's handling performance.
16
3
Share

Is the Transmission Hydraulic Oil Pump Failure Serious?

Transmission hydraulic oil pump failure is relatively serious. The following are the manifestations of transmission hydraulic pump failure: 1. Intake system air leakage, mixture too lean; 2. Incorrect timing, incorrect ignition advance angle; 3. Throttle position sensor or air flow meter failure; 4. Fuel pressure too low; 5. Injector malfunction. Below is relevant information about the transmission hydraulic oil pump: 1. Types: In the oil supply system of an automatic transmission, commonly used oil pumps include internal gear oil pumps, rotor-type oil pumps, and vane-type oil pumps. The function of the oil pump is to provide hydraulic oil of a certain pressure and flow rate for the torque converter and hydraulic control system, and to meet the lubrication needs of planetary gear mechanisms and other friction pairs. 2. Drive source: The oil pump is the power source of the entire hydraulic system of the automatic transmission and is generally directly driven by the engine.
20
0
Share

What is the minimum ground clearance of the Jetta VS7?

The minimum ground clearance of the Jetta VS7 is 150-160mm. Jetta VS7 configuration: The Jetta VS7 is equipped with Volkswagen's EA211-DJS engine, which delivers 150 horsepower and a maximum torque of 250 Nm. The manual transmission models of the VS7 use a 5-speed manual gearbox, while the automatic transmission models use a 6AT gearbox from Aisin. Basic parameters of the Jetta VS7: The Jetta VS7 is a mid-size SUV with a length, width, and height of 4624 mm, 1841 mm, and 1644 mm respectively, and a wheelbase of 2730 mm.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.