Is Squeaking Noise a Common Issue with Mercedes-Benz?

1 Answers
MatteoRose
07/30/25 4:31am
Mercedes-Benz brake squeaking was indeed a quite common issue in recent years. Generally, the first step when encountering brake noise is to visit an authorized 4S dealership for resolution. If the vehicle is still under warranty, repairs can typically be performed free of charge. 1. There are several reasons that may cause brake squeaking: The brake pads may be made of overly hard material, resulting in noise when rubbing against the brake discs; uneven brake discs can also lead to squeaking issues; and worn-out brake pads nearing the end of their lifespan may produce noise as well. 2. Warranty information: According to relevant regulations, the minimum warranty period for passenger vehicles is no less than 3 years or 60,000 kilometers, whichever comes first. If the mileage does not exceed the warranty limit within one year and the squeaking involves non-wear-and-tear components, it should fall under warranty coverage. Damage caused by human factors or other reasons is not covered by the warranty.
Was this review help?
10
4
Share
More Forum Discussions

How to Deal with Fishy Smell in Car Trunk?

Here are the solutions for dealing with fishy smell in the car trunk: Professional Car Wash: A more convenient method is to take your car to a professional car wash for deep cleaning and deodorizing. Shops offering this service usually provide satisfactory results. Prices vary but are generally not too expensive. UV Deodorization: Fishy smell is essentially a type of chemical compound. Using a UV ozone lamp for sterilization and deodorization is also highly effective. However, the power supply can be an issue, making this method suitable only for those with a garage. Ventilate the Trunk: If there is a trunk mat, remove it and clean it thoroughly. Keep the trunk open for ventilation, and the smell will naturally dissipate over time. Use Deodorizing Spray: Alternatively, you can purchase deodorizing sprays with both deodorizing and sterilizing functions. The effectiveness varies depending on the brand.
7
0
Share

What is the voltage of a pure electric vehicle?

Electric vehicles generally operate at 336V or 384V, while electric buses typically use 580-600V. The higher the bus voltage, the wider the constant power speed range of the motor. Introduction to electric vehicles: Pure electric vehicles are powered by on-board batteries and use electric motors to drive the wheels. Advantages of electric vehicles: Environmental protection: Electric vehicles utilize power battery packs and electric motors for propulsion, producing no exhaust emissions or tailpipe pollution. They are highly beneficial for environmental protection and air cleanliness, achieving nearly "zero pollution". Low noise: Electric vehicles do not generate the same level of noise as conventional vehicles, with their operating noise being almost negligible. Economical: The operating costs of electric vehicles are low, approximately one-fifth that of gasoline-powered vehicles. Easy maintenance: With electric motors and battery-driven systems, electric vehicles eliminate the need for traditional engine maintenance tasks such as oil changes, filter replacements, or belt adjustments. They only require regular inspections of the motor and battery components.
15
4
Share

What brand is the Monkey motorcycle?

Monkey motorcycle is a brand of Honda. Motorcycle gear shifting method: For the rotary gear system, stepping forward once is first gear, stepping again is second gear, stepping again is third gear, stepping again is fourth gear, stepping again is neutral. From neutral, stepping forward again returns to first gear. When in neutral, stepping backward shifts to fourth gear, and so on in a cyclic manner. With your left hand, pull the clutch lever, and with your left foot, press the rear clutch operating rod to downshift one gear. Generally, motorcycles have four to five gears. First and second gears are suitable for climbing hills. Third and fourth gears are suitable for normal road driving, while fifth gear is suitable for smooth road surfaces and allows for very high speeds. Location of the motorcycle main switch: Under the seat, open it with the keyhole on the right side of the vehicle.
16
5
Share

Why does the clutch make a clunking sound when released too quickly?

When the clutch is released too quickly, a clunking sound may occur due to the driven friction plate being loose on the steel plate or the separation lever colliding with the window hole. Metal knocking sound when releasing the clutch: If a "click" or "clang" metal impact sound is heard at the moment the clutch engages or disengages, and it is more noticeable when starting with a heavy load, it is caused by excessive clearance between the driven plate spline hole and its shaft. In severe cases, it should be repaired or replaced. If a "clattering" impact sound is heard, this is due to the driven friction plate being loose on the steel plate or the separation lever colliding with the window hole. Sharp screeching sound when releasing the clutch: If a sharp screeching sound is heard just before the clutch engages, and the sound disappears when the pedal is pressed down but reappears when the pedal is released, this is caused by the driven plate steel plate being broken or the rivet heads protruding and scraping against the pressure plate or flywheel. It should be repaired. "Clunking" sound when releasing the clutch: If the clutch pedal is released very slowly and the vehicle jerks forward with a "clunking" sound, this is caused by the sudden engagement of the driving and driven parts. The reasons come from two aspects: one is the deformation of the driven plate or oil contamination on the friction lining, causing the clutch to continue engaging and resulting in jerking; the other is the linkage system being stuck, causing the pressure plate to suddenly press against the driven plate and resulting in jerking.
16
1
Share

What does the M on the car mean?

M on the car stands for manual mode. Precautions for shifting gears in a car: Do not press the accelerator pedal when shifting gears; do not immediately press the accelerator pedal hard after shifting into gear; the vehicle can only be started in P or N gear; the gear lever must be removed from P gear while pressing the brake, etc. Advantages of automatic transmission: The advantages of automatic transmission are reflected in its intelligence, no need to shift gears, ease of use, simplicity, and higher safety of the automatic transmission. Driving operation is simpler, and with the absence of the clutch and manual gear lever, there is less need for coordination with the left foot, thereby reducing the driver's workload and mechanical wear.
5
1
Share

Can I Claim Insurance for Damaged Rims?

Damaged rims cannot be claimed under insurance. Specific situations where claims are possible: If only the tire is damaged, no claim is made, replace it yourself; if only the rim is damaged, no claim is made, replace it yourself; if both the tire and rim are damaged and need replacement, then you can claim insurance. Apart from this, individual damage to components like headlights, rearview mirrors, sunroofs, etc., is also not claimable. Procedure for claiming insurance in a single-party accident: First, report the incident, then assess the damage, repair the vehicle, and finally, submit the claim to the insurance company. If the insurance was purchased at a 4S store, they will handle all the procedures. If there are injuries, first report the incident and send the injured to the hospital. Specific matters will be analyzed case by case. Most importantly, keep all hospital receipts ready, as the insurance company needs them for records. Without these, the insurance company will not reimburse.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.