Is Southeast a Domestic or Joint Venture Car Brand?

What is the minimum ground clearance of the SAIC Volkswagen Lavida?

The minimum ground clearance of the SAIC Volkswagen Lavida is 115mm. Its body dimensions are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm, a fuel tank capacity of 51 liters, and a trunk capacity of 510 liters. The 2021 Comfort version features a front McPherson independent suspension and a rear trailing arm semi-independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.

12

5

Share

Is the Forester a 4WD vehicle?

The Forester is a 4WD vehicle, a 5-door, 5-seat compact SUV under the Subaru brand. It is equipped with a 2.0T direct-injection 4-cylinder turbocharged engine, delivering a maximum horsepower of 154 PS, a maximum torque of 196 Nm, and a maximum power of 113 kW. It is paired with a 10-speed continuously variable transmission. The Forester's body dimensions are: length 4640 mm, width 1815 mm, height 1730 mm, with a wheelbase of 2670 mm, a minimum ground clearance of 220 mm, and a curb weight of 1546 kg. The front suspension is a MacPherson strut independent suspension, and the rear suspension is a double-wishbone independent suspension.

8

5

Share

What car brand has a logo with three triangles?

The car brand with a logo featuring three triangles is Mercedes-Benz. Its models include the S, SL, CL, E, and CLS series. The dimensions of the vehicle are: length 5078mm, width 1860mm, height 1484mm, with a wheelbase of 3079mm and a fuel tank capacity of 66 liters. The 2021 sport version of Mercedes-Benz features a multi-link independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 184PS, maximum power of 135kW, and maximum torque of 280Nm, paired with a 9-speed automatic transmission.

20

1

Share

What type of suspension does the Mitsubishi Zinger use?

The suspension used in the Mitsubishi Zinger varies by position: the front suspension employs a double-wishbone independent suspension, while the rear suspension uses a multi-link independent suspension. The functions of the suspension include: automatically adjusting the camber angle when the wheels move up and down, reducing changes in track width, minimizing tire wear, adapting to road conditions, increasing the tire contact area, and enhancing road grip. Taking the 2011 Classic Mitsubishi Zinger as an example, its body dimensions are: length 4615mm, width 1775mm, height 1805mm, with a wheelbase of 2720mm. The 2011 Classic Mitsubishi Zinger features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 170PS, a maximum power of 125kW, and a maximum torque of 190Nm, paired with a 5-speed manual transmission.

10

3

Share

How to remove ETC without damaging the car film?

The methods to remove ETC without damaging the car film are: 1. Use a hair dryer to heat the contact surface between the ETC device and the glass to soften it, then gently remove it; 2. Soak a towel in hot water and heat the adhesive tape on the back of the device; 3. Use a scraper to remove the adhesive tape and take it off. After installing the ETC, the owner should not remove it at will. There is an anti-removal mark on the back of the ETC. If the ETC is accidentally removed, the electronic tag will become invalid, and it must be reactivated by the staff at the customer service center. Otherwise, the ETC will not be usable the next time the car passes through the ETC lane for toll collection.

19

0

Share

What to Do When the Roewe RX5 Car Runs Out of Battery?

If the Roewe RX5's battery is dead, you can use jumper cables to charge it. The precautions for using jumper cables are: 1. Before connecting the jumper cables to the power-supplying vehicle, turn off its engine first; 2. After connecting the jumper cables to the power-supplying vehicle, ensure that the positive and negative terminals do not come into contact, as a short circuit is very dangerous; 3. When removing the jumper cables, disconnect the negative terminal first, followed by the positive terminal. Taking the 2020 4G Internet Million Edition Roewe RX5 as an example, it is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum torque of 250 Nm, paired with a 6-speed manual transmission.

9

0

Share

Is Southeast a Domestic or Joint Venture Car Brand?

What is the minimum ground clearance of the SAIC Volkswagen Lavida?

Is the Forester a 4WD vehicle?

What car brand has a logo with three triangles?

What type of suspension does the Mitsubishi Zinger use?

How to remove ETC without damaging the car film?

What to Do When the Roewe RX5 Car Runs Out of Battery?

What are the causes of spark plug damage?

Which cars have headlight cleaning function?

What is the function of engine oil maintenance?

Which vehicles use urea?