Is soundproofing effective for the BMW X1?

2 Answers
DelJoel
09/02/25 7:05am
Soundproofing is effective for the BMW X1. Noise reduction: Automotive soundproofing can reduce engine noise, as well as block body rattles, tire noise, and wind noise. Especially for passengers, poor soundproofing can severely impact ride comfort. For drivers, excessive noise can interfere with normal driving. Improved audio quality: Enthusiasts who modify their cars often upgrade the audio system. After soundproofing, noise transmission is minimized, enhancing the audio performance and providing a more comfortable driving environment that reduces drowsiness. Thermal insulation: Automotive thermal insulation works in two ways: in winter, it helps maintain cabin temperature by preventing heat loss, while in summer, it protects delicate interior components from damage caused by prolonged exposure to sunlight. Body reinforcement: Soundproofing projects typically involve the engine hood, doors, and trunk—areas prone to wear and tear. The added soundproofing materials effectively reinforce these parts, making the vehicle body more robust.
Was this review help?
16
5
Share
StVincent
09/15/25 2:20am
I've driven a BMW X1 for several years and found the factory noise level to be quite high on highways, with both wind and road noise being quite disturbing. Last year, I had a full soundproofing treatment done, mainly adding soundproofing foam to the wheel arches and sealing strips to the door panels, which cost over 3,000 yuan. The effect is noticeable—highway noise has reduced significantly, and listening to music is more enjoyable. However, it's important to note that this car isn't inherently well-sealed, so the soundproofing isn't as effective as on an Audi Q3. Now, I feel more relaxed while driving, especially on long trips, though the difference isn't as noticeable in the city. I recommend going to a professional shop for installation and choosing well-known brands for materials to ensure better quality and durability.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

What are the steps for installing a license plate?

Steps for installing a license plate: 1. After receiving the license plate, there is usually a pack of secure screws included. Nowadays, vehicles require both front and rear license plates to be installed with 4 screws each, totaling 8 screw holes. 2. Take out the license plate screws, and while rotating, insert them into the anti-theft caps as shown in the figure. 3. Then, position the license plate correctly, align the screws with the four gaps on the bumper, and secure them using a cross screwdriver. A license plate refers to the vehicle registration plate, which is a panel hung on both the front and rear of the vehicle. It is typically made of aluminum, plastic, or sticker material, displaying the vehicle's registration number, registration region, or other basic information. The license plate serves as an identification number for each vehicle, with its primary function being to identify the province, city, or county to which the vehicle belongs. The vehicle management office can use the license plate to trace the owner of the vehicle.
16
5
Share

How Many Years Do Car Tires Normally Last?

Tires generally have a normal service life of about 3 years, with a typical mileage of 50,000 to 60,000 kilometers under normal road conditions. It is recommended to rotate tires every 8,000 to 10,000 kilometers. For passenger car tires, the recommended tire pressure is usually 2.3 for the front wheels and 2.5 for the rear wheels. When the tread wear indicator (the raised bar at 1.6 mm depth in the tread groove near the triangular mark on the tire sidewall) becomes visible, the tire should be replaced immediately. Since tires are rubber products, they naturally age over time, becoming prone to cracking and experiencing significantly reduced heat dissipation. This leads to poorer driving comfort, slower acceleration, and a higher risk of losing control during braking due to insufficient grip, especially dangerous at high speeds. If the tire aging has affected the tire carcass, replacement is necessary regardless of the mileage or tread wear.
6
2
Share

What is the minimum engine displacement for motorcycles to be allowed on highways?

Motorcycles with an engine displacement of 50cc or above are permitted on highways. Below are specific daily maintenance methods for motorcycles: 1. Idle speed control: During the break-in period, maintain motorcycle idle speed at 100 rpm. 2. Gear-speed correspondence: Match motorcycle gears with appropriate speeds. 3. Braking method: When braking is required for obstacles ahead, release the throttle, apply the rear brake with your right foot, while gently applying the front brake with your right hand. 4. Spark plug installation method: For new spark plugs, hand-tighten until snug, then use a spark plug socket to tighten an additional quarter to half turn.
3
2
Share

Does the Envision need window tinting?

The Envision needs window tinting. The benefits of car window tinting are also obvious (here referring to quality-certified genuine films), which can block light and heat, prevent shattering, and have obvious effects on safety and comfort performance. Car window tinting is the application of a thin film-like object on the front and rear windshields, side windows, and sunroof of the vehicle. This film-like object is also called a solar film or heat-insulating film. Here is additional information: Functions: It blocks ultraviolet rays, reduces some heat, prevents injuries caused by flying glass, and reduces glare. At the same time, according to the one-way perspective performance of the solar film, it achieves the purpose of protecting personal privacy. In addition, it can also reduce damage to items and people inside the car caused by ultraviolet radiation. Through physical reflection, it lowers the temperature inside the car, reduces the use of the car air conditioner, thereby lowering fuel consumption and saving some expenses.
12
0
Share

What is the 0-100 km/h acceleration time for the Highlander 2.7?

The Highlander 2.7 achieved a 0-100 km/h acceleration time of 10.7 seconds in testing. The power output of the Highlander 2.7 is indeed somewhat aggressive. Due to its relatively soft suspension setup, the phenomenon of the front end lifting is quite noticeable, which also caused the front wheels to slip during the initial acceleration phase. Here is some additional information: About the Highlander: During the initial acceleration phase, the G-force of the Highlander is maintained at around 0.5g. After reaching the mid-range of first gear, it gradually begins to decline, staying at a level between 0.3g and 0.4g. After shifting into higher gears, there is a further downward trend in G-force. It's surprising that a 2.7-liter engine driving a body weighing over 1.7 tons can only produce such small G-force values, which indeed cannot be considered strong.
1
3
Share

How often should the transmission fluid be changed for Honda CRV?

Honda CRV automatic transmission fluid should be changed every 40,000 kilometers, while manual transmission fluid should be changed every 60,000 kilometers. Manual fluid replacement requires 4-6 liters, and machine circulation replacement requires 9-12 liters. Below is relevant information about automatic transmissions: 1. Introduction: The core of an automatic transmission lies in achieving automatic gear shifting. Automatic gear shifting means that while driving, the driver operates the accelerator pedal as needed, and the automatic transmission can automatically shift into different gears based on engine load and the vehicle's operating conditions. 2. Classification: Depending on the working principle, there are currently four common types of automatic transmissions in vehicles: hydraulic automatic transmission, mechanical continuously variable automatic transmission, electronically controlled mechanical automatic transmission, and dual-clutch automatic transmission.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.