Is Soundproofing Cotton Effective?

2 Answers
HaydenAnn
09/03/25 5:53am
Adding soundproofing cotton to a car is effective. The advantages and disadvantages of replacing soundproofing cotton are introduced as follows: Advantages of replacing soundproofing cotton: Replacing with qualified soundproofing cotton helps improve the air quality inside the vehicle. The role of soundproofing cotton is not only for noise reduction but also for thermal insulation. Upgrading to better soundproofing cotton can effectively maintain engine compartment temperature in winter. Disadvantages of replacing soundproofing cotton: Before installing new soundproofing cotton, a large number of components need to be removed, including the dashboard, front bumper, and floor coverings inside the car. This may lead to installation errors during reassembly, potentially resulting in less precise reinstallation.
Was this review help?
3
5
Share
OJames
09/15/25 7:22am
I'm a car DIY enthusiast who loves tinkering with my own vehicle. Recently, I added soundproofing foam to my old car, and it really works! I bought a foam material kit and spent a whole day applying it to the inner door panels and under the rear seats, mainly to tackle wind and tire noise. Now, driving on the highway is much quieter—no need to shout when talking, and the audio sounds clearer too. When installing, make sure to clean off dust before applying, or it might fall off; the cost was around 200 yuan, and I recommend choosing well-reviewed materials—don’t skimp on quality. This method is great for budget-conscious folks, but DIY is quite labor-intensive, so beginners shouldn’t go overboard. Overall, the improvement is significant—driving is more enjoyable, and better noise control helps reduce fatigue.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What brand of engine oil does BMW use?

BMW uses Castrol engine oil. The following are the functions of engine oil: Lubrication: There is rapid relative sliding between pistons and cylinders, as well as between main shafts and bearing bushes. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby reducing wear. Auxiliary cooling: Engine oil has a relatively low specific heat value and is located inside the engine, so it does not inherently have a cooling effect. However, when the engine is running, the heat generated by fuel combustion can be carried back to the oil tank by the engine oil and then dissipated into the air, helping the radiator to cool the engine. The actual cooling is done by the water (or antifreeze liquid) outside the engine casing. Cleaning: Good engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation, and the flow of the lubricating oil washes away dirt generated on the working surfaces of the parts.
18
0
Share

Where is the specific location of the engine number on the Mazda6?

The specific location of the engine number on the Mazda6 is on the side of the engine block. The engine number includes information such as the engine model, production date, and origin code. Each engine has a unique engine number, which serves as important archival information for the vehicle, facilitating engine management by both the engine manufacturer and vehicle administration departments. Special attention should be paid to the engine number during routine maintenance or engine replacement. The Mazda6 is a product launched by Mazda, with dimensions of 4670mm in length, 1780mm in width, and 1435mm in height, and a wheelbase of 2675mm. The front bumper and chrome wing-shaped grille of this vehicle feature Mazda's coupe-style design, and the door anti-scratch strips have been removed. Additionally, it adopts an independent front fog light assembly design, and the wheels have been upgraded to a new 10-spoke design with five thick and five thin spokes, giving the overall appearance a more fashionable look.
18
1
Share

What is the failure rate of the Changan UNI-T?

The failure rate of the Changan UNI-T is 0.09%, which means there is only one complaint case per 1,000 UNI-T vehicles on average, indicating a relatively low overall failure rate. Below is an introduction to the Changan UNI-T: Body dimensions: The Changan UNI-T is a compact SUV under the Changan brand, with a wheelbase of 2,710 mm, and length, width, and height of 4,515 mm, 1,870 mm, and 1,565 mm respectively. Powertrain: The 1.5-liter turbocharged engine in the Changan UNI-T delivers 180 horsepower and a maximum torque of 300 Nm. This engine reaches its maximum power at 5,500 rpm and its maximum torque between 1,250 to 3,500 rpm.
9
4
Share

How many seconds does the Bugatti Veyron take to accelerate from 0 to 100 meters?

Bugatti Veyron accelerates from 0 to 100 meters in 2.5 seconds. Here are the relevant details: 0-100km/h acceleration: This refers to the time taken to accelerate from 0 to 100km/h, which is the most intuitive reflection of a car's power. Generally, 1.6L compact cars achieve 0-100km/h acceleration times between 11 to 13 seconds, 2.0T mid-size sedans between 7 to 8 seconds, while supercars mostly achieve times under 3.8 seconds. Among vehicles with the same displacement: Models equipped with turbocharged engines have a significant advantage in 0-100km/h acceleration because they deliver more powerful output, and their maximum torque output range is very broad, allowing the vehicle to maximize acceleration capability at very low RPMs.
8
1
Share

Will the Tiguan automatically lock if I forget to lock the doors?

Tiguan will not automatically lock if you forget to lock the doors. Here is some relevant information about auto-locking: Function of auto-locking: The auto-locking function, also known as speed-sensing auto-locking, is an electronic device that automatically presses the door lock button when the vehicle reaches a preset speed, preventing accidental opening of the doors. Pros and cons of auto-locking: Impact on escape: In the event of a traffic accident, the electronic device's circuitry may be damaged, preventing the doors from being opened immediately, which could delay escape and rescue efforts, potentially leading to serious tragedies. Preventing accidental door opening by children and passengers: It protects child passengers inside the vehicle, preventing young children from opening the door handles while the car is in motion. Purpose of auto-locking: The main goal is theft prevention, allowing the doors to lock quickly after driving starts, preventing door pull robberies during traffic jams or at red lights, thus providing a certain level of security.
12
3
Share

How to Use the Gear Shift of Roewe i5?

First, press the brake pedal with your right foot. To move forward, pull the gear lever to the D (Drive) position, and to reverse, pull it to the R (Reverse) position. Then release the handbrake, slowly release the brake pedal, move your right foot to the accelerator pedal, and gently press to move forward. The SAIC New Energy pure electric architecture-designed tourer Roewe Ei5 features the Roewe family's "Rhythm Design" concept in its exterior, presenting a sleek overall shape. Below is an introduction to the Roewe i5: 1. The Roewe i5 is a compact sedan that continues the Roewe "Rhythm" family design language, appearing both youthful and dynamic while maintaining the mature and stable feel of a family car. The inverted trapezoidal grille is the latest design of the Roewe family, connecting with the stylish Y-shaped divided headlights, creating a square and grand visual effect. Combined with the elegant side body lines and a simple, appropriate, and slightly raised rear, the entire car exudes a fashionable aura that attracts attention. 2. In terms of interior, the Roewe i5 incorporates many youthful elements, blending fashion with stability, offering great surprises in both visual and tactile experiences. The 10-inch central control screen and a 12-inch digital instrument cluster are very attractive, pairing together to create a strong sense of technology. Coupled with the highly mature and playable Banma Zhixing 2.0 system, it evokes a feeling of a high-tech space capsule. 3. In terms of power, the Roewe i5 is equipped with two engines from SAIC's "Blue Core": a 1.5T and a 1.5L. The 1.5T engine has a maximum power of 124kW (169PS) and a peak torque of 250N·m. For transmission, the 1.5L engine is matched with a CVT gearbox, while the 1.5T engine is paired with a 7-speed dual-clutch transmission.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.