Is simulator training mandatory?

What is the issue when the EPC light is on?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other conditions. The power-on self-test is a pre-driving check of all vehicle sensors. Typically, if the vehicle is not started, the light will turn off by itself after about 3 seconds. If the EPC light remains on after the vehicle is started or under other circumstances, the common causes include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other conditions: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: Issues such as substandard fuel, fuel degradation, or poor fuel atomization can cause the light to come on. Engine fault: Insufficient engine pressure or problems with components like the intake valves can also trigger the EPC light. ECU control unit fault: Interference with the vehicle's computer signals or false alarms from the computer can lead to this issue. Brake light fault: Malfunctions like non-functional brake lights, faulty brake switches, or brake circuit issues can cause the EPC light to illuminate. Solutions for the EPC light: Troubleshoot the intake system, use the appropriate fuel grade, clean the throttle body, etc. Remove carbon deposits from relevant components. Re-flash the ECU with updated data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains off. If it does not illuminate again, there may be no issue, possibly just a temporary influence on the EPC indicator. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, often referred to as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system takes predefined actions to address the powertrain issues. The EPC indicator light typically appears in two colors: yellow and red. A yellow EPC light indicates a fault, but the vehicle can still be driven cautiously to a repair shop. A red EPC light signifies a more severe issue, requiring immediate stopping of the vehicle and contacting a professional for repairs. Continuing to drive with a red EPC light can severely damage core components or compromise driving safety.

16

4

Share

How to Remove and Install the Spark Plugs on a Volkswagen Sagitar?

Method for removing and installing the spark plugs on a Volkswagen Sagitar: 1. Disconnect the ignition coil wiring harness plug and remove the ignition coil fixing bolt; 2. Select the appropriate tool to remove the spark plugs and take them out one by one; 3. Align the ignition coil with the spark plug, install it in place, and use a tool to screw in the bolt; 4. Check if there are any issues with the new spark plugs, place the spark plug into a dedicated socket, screw it into the spark plug hole, tighten the spark plug, turn off the ignition switch, open the engine hood, and install the three-piece set; 5. Use a digital torque wrench to tighten and complete the installation. The Volkswagen Sagitar has a body length, width, and height of 4753mm, 1800mm, and 1462mm respectively, with a wheelbase of 2731mm. The car's engine has a maximum power of 85kw and a maximum torque of 175nm.

1

0

Share

How many cylinders does the Infiniti Q50L have?

Infiniti Q50L has four cylinders. This model is equipped with a 2.0L four-cylinder turbocharged engine across the entire lineup, paired with a 7-speed automatic transmission. The engine delivers a maximum power of 155kW and a peak torque of 350Nm. It also features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The Infiniti Q50L measures 4867mm in length, 1823mm in width, and 1456mm in height, with a wheelbase of 2898mm. The vehicle adopts a front-engine, rear-wheel-drive layout. For suspension, it employs an independent double-wishbone setup at the front and a multi-link independent suspension at the rear.

12

5

Share

What car brand has a logo resembling a lion?

A logo resembling a lion belongs to Peugeot. Peugeot is an automobile brand under Peugeot Automobile Company, a subsidiary of the French PSA Peugeot Citroën Group. Peugeot Automobile Company is a long-established European automobile manufacturer. Taking the Peugeot 408 as an example, its body dimensions are 4750mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2730mm, and it features front-engine, front-wheel-drive configuration. The Peugeot 408 is equipped with a 1.2T turbocharged engine paired with a 6-speed dual-clutch transmission. This engine delivers a maximum power of 100kW and a maximum torque of 230Nm, and it also incorporates direct fuel injection technology, utilizing an aluminum alloy cylinder head and block.

10

0

Share

Where is Lynk & Co produced?

Lynk & Co vehicles are produced in Taizhou or Zhangjiakou. The Lynk & Co brand includes models such as the Lynk & Co 06, Lynk & Co 06 New Energy, Lynk & Co 02, Lynk & Co 02 New Energy, Lynk & Co 01, and others. Taking the Lynk & Co 06 as an example, its dimensions are 4340mm in length, 1820mm in width, and 1625mm in height, with a wheelbase of 2640mm. The vehicle features front-wheel drive, with a MacPherson independent front suspension and a multi-link independent rear suspension. The Lynk & Co 06 is equipped with a 1.5T turbocharged engine paired with a 7-speed dual-clutch transmission, delivering a maximum power of 130kW and a maximum torque of 255Nm.

1

5

Share

How to Apply for ETC for Someone Else's Car?

To apply for ETC for someone else's car, the agent needs to bring their own ID, as well as the car owner's ID and vehicle license to an ETC service point. After filling out the relevant forms, the application can be completed. Note that only one ETC device can be installed per vehicle, but the linked bank card is not restricted and can be changed later. However, changing the bank card requires applying for a replacement registration at the issuing bank or the ETC management department. The ETC system uses automatic vehicle identification technology to establish wireless data communication between the vehicle and the toll station, enabling automatic vehicle recognition and exchange of toll data. It employs computer networks to process toll data, achieving a fully automatic electronic toll collection system without the need for stopping or toll booths.

15

5

Share

Is simulator training mandatory?

What is the issue when the EPC light is on?

How to Remove and Install the Spark Plugs on a Volkswagen Sagitar?

How many cylinders does the Infiniti Q50L have?

What car brand has a logo resembling a lion?

Where is Lynk & Co produced?

How to Apply for ETC for Someone Else's Car?

What is a vehicle VIN code?

How many colors are available for the 2019 New Sagitar?

What to Do When You Run Out of Gas on the Highway?

What is the difference between a one-way street and a straight lane?