Is Shanghai Volkswagen Skoda a domestic or joint venture brand?

1 Answers
DelAurora
07/30/25 9:15am
Shanghai Volkswagen Skoda is a joint venture brand, a subsidiary under the Volkswagen Group, and one of Volkswagen's classic brands. As one of the world's oldest car manufacturers with a long history, Skoda is now a sub-brand under Volkswagen. Skoda has a rich history and is a century-old car manufacturer. Its domestic joint venture partner is SAIC Volkswagen. The 2018 Skoda Octavia sedan has body dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, with a wheelbase of 2686mm. This model is equipped with 1.5L, 1.2T, and 1.4T engines.
Was this review help?
14
4
Share
More Forum Discussions

How to Remove Cigarette Smell from the Car?

Methods to remove cigarette smell from the car include: 1. Place apples, pineapples, or oranges inside the car; 2. Prepare an empty bottle in the car, throw cigarette butts directly into it and close the lid; 3. Turn on the car's air purifier; 4. Mix a small amount of vinegar with water, soak a towel in the solution, and wave it inside the car; 5. Open the windows to ventilate, allowing air convection to expel the smoke smell outside; 6. Spray lemon juice inside the car; 7. Open the windows to ventilate, allowing air convection to expel the smoke smell outside; 8. Place several freshly peeled grapefruit peels inside the car; 9. Place activated charcoal bags inside the car.
11
3
Share

How Far Can You Drive When the Fuel Gauge Light Comes On?

When the fuel gauge light comes on, you can typically drive about thirty to fifty kilometers. The fuel gauge is designed to display the amount of fuel in the car's tank. It consists of a fuel indicator with a voltage regulator and a fuel level sensor. The low fuel warning system activates when the fuel level in the tank falls below a specified limit, alerting the driver immediately. Important notes regarding the fuel gauge include: 1. Avoid waiting until the warning light comes on to refuel, as running on very low fuel can harm the fuel pump and shorten its lifespan; 2. Indication discrepancies may occur. For instance, after replacing the battery or fuel filter, the fuel gauge might show a lower level than before upon restarting the car. This is due to pressure release when the fuel tank is opened, causing the fuel level to drop, and such display variations are normal.
3
1
Share

What to Do When Water Enters the Car Interior?

The solutions for water entering the car interior are: 1. Park the car and turn off the engine to check if water has entered the engine cylinders; 2. Check if the engine oil has been contaminated with water; 3. Disconnect the negative terminal of the battery to prevent electrical short circuits caused by water damage to the vehicle's electronics. Precautions for driving in rainy weather or through waterlogged areas: 1. Be extra cautious if the water depth exceeds the front bumper; 2. Do not continue driving if the water depth exceeds the engine hood; 3. Avoid driving at high speed through ditches or puddles; 4. Maintain a sufficient safe distance. Signs of water entering the engine: 1. Engine stalling while driving: Water soaking the air filter element can prevent the spark plugs from igniting, causing the car to stall; 2. Overheated breather pipe: In summer, this can damage lubrication, with hot air escaping from the crankcase breather pipe, causing it to overheat.
5
1
Share

Can I replace just one car tire?

It is possible to replace just one car tire. Steps for tire replacement: 1. Use a jack to lift the vehicle to a certain height; 2. Remove the screws and take off the tire; 3. Install the new tire and lower the jack. Precautions for tire replacement: 1. Identify the correct side of the tire; 2. Choose a tire that meets quality standards; 3. Replace the valve stem at the same time; 4. Ensure the correct installation direction; 5. Install the new tire on the rear axle of the vehicle; 6. Avoid sudden braking after replacing the tire; 7. Remove screws diagonally when taking off the tire; 8. Perform a four-wheel alignment when replacing the tire. Functions of tires: 1. Transmit driving force, braking force, and steering force to operate the vehicle; 2. Support the vehicle load; 3. Reduce and absorb vibrations and impacts during driving.
20
0
Share

Are the front shock absorbers of a car divided into left and right?

Car front shock absorbers are divided into left and right, with obvious l and r markings on the shock absorber parts for distinction, where l represents the left side and r represents the right side. The shock absorber is an important component of the car's suspension system, and its function is to suppress the vibration deformation absorbed by the spring and the oscillation during the spring rebound, as well as to absorb the impact force from the road surface, directly affecting the ride comfort and handling of the car, which in turn affects driving safety. The working principle of the shock absorber is: when relative movement occurs between the frame and the axle due to vibration, the piston inside the shock absorber moves up and down, and the oil in the shock absorber cavity repeatedly flows from one cavity to another through different pores. The components of the shock absorber include: lower spring pad, dust cover, spring, shock absorber pad, upper spring pad, spring seat, bearing, top rubber, and nut.
2
0
Share

How Often Should the Car Air Conditioning Filter Be Replaced?

Car air conditioning filters should be replaced approximately every 10,000 kilometers. The method for replacing the air conditioning filter is as follows: 1. Remove the damping rods on both sides of the glove box; 2. Take off the glove box to reveal a black rectangular cover plate, pry it open, and remove the clips; 3. Take out the old air conditioning filter; 4. Install the new filter. The functions of the air conditioning filter include: 1. Providing fresh air; 2. Ensuring safety and hygiene; 3. Absorbing harmful substances; 4. Filtering solid impurities. The method for using the air conditioning system is: 1. Turn on the AC switch; 2. Adjust the air outlet selection knob—direct the air outlet upward when cooling and downward when heating; 3. Adjust the fan speed switch; 4. Adjust the air recirculation conversion knob; 5. Adjust the temperature control knob.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.