···
Log in / Register

Is Rust in the Trunk Normal?

1 Answers
DiChloe
09/09/25 2:09am
Rust in the trunk is normal and has minimal impact. Here are some additional details: Repair: Clean the rusted area thoroughly and repair it by welding. If the rusted area is too large to weld, it needs to be repaired by cutting—remove the rusted section, replace it, and then weld it. This completes the repair of rusted and rotted trunk areas. Regularly check moisture-prone areas: Certain gaps at the bottom of the car body and the interior floor are prone to accumulating sludge. If not cleaned promptly, moisture can hide there. Therefore, regularly inspect areas such as the inner and outer edges of the wheel hubs, doors, bottom corners of the trunk, keyholes, and moving parts of the wiper arms. Also, ensure the drainage holes in doors and other parts of the body remain unobstructed. Check the humidity of interior coverings, such as carpets, to prevent rusting of floor components.
Was this review help?
4
3
Share
More Forum Discussions

What is the reason for the unresponsive display of Geely Vision X6?

Geely Vision X6 display unresponsive reasons are as follows: Display settings issue: Generally, there is a camera switch control in the display settings, just turn the switch to "ON". Wiring problem: One of the most common issues with high failure rates. Since the wiring harness for the reversing camera runs from the dashboard all the way to the rear trunk, the long wiring path makes it likely for a loose connection or poor contact at some point, requiring careful inspection. Scratched reversing camera: The surface of most cameras is very fragile, so it is necessary to apply a protective film on the outside of the camera; the quality of the reversing camera is too poor.
8
0
Share

Toyota RAV4 Tire Specifications?

Toyota RAV4 tires come in two models: 225/65-R17 and 235/55-R18. More information about the Toyota RAV4 is as follows: 1. The RAV4 is positioned as an urban SUV. As a leader in the urban SUV segment, the RAV4 combines high quality and performance with driving comfort and excellent off-road capability, allowing it to handle both ON-ROAD and OFF-ROAD conditions and meet diverse lifestyle needs. 2. The body dimensions of the new-generation RAV4 have been increased, with a length, width, and height of 4570/1845/1660mm respectively, and a wheelbase of 2660mm.
7
3
Share

What transmission does the 2019 Nissan Qashqai use?

The 2019 Nissan Qashqai is equipped with a new-generation XTRONIC CVT intelligent continuously variable transmission, featuring a 7-speed manual mode. CVT transmissions are commonly found in Japanese models, as they can optimally select the appropriate gear ratio based on engine conditions, achieving transmission efficiency between 90% to 97% during operation. The Qashqai's body dimensions are 4315mm in length, 1783mm in width, and 1606mm in height, with a wheelbase of 2630mm. In terms of power, this vehicle uses a 2.0L naturally aspirated four-cylinder engine with the model code MR20. Compared to the previous model, this engine has seen slight improvements in parameters, primarily in meeting the China VI emission standards.
14
5
Share

Is the Camry based on the TNGA platform?

The Camry is built on the TNGA platform, which stands for Toyota New Global Architecture in Chinese. The TNGA platform enables Toyota to optimize and integrate its internal resources and collaboration with suppliers, resulting in vehicles that better align with the original design philosophy. Within the Toyota Motor Group, there was a system called the CE system. However, as Toyota's business volume increased, the CE system struggled to meet the requirements for sustainable development, leading to the creation of the TNGA platform. The 2019 Camry is available in two versions: China V and China VI. The car measures 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. The 2019 Camry is equipped with either a 2.0L or a 2.5L engine, paired with a CVT continuously variable transmission or an 8-speed automatic transmission.
16
4
Share

What is the normal tire pressure for a Buick Excelle?

The normal tire pressure for a Buick Excelle is 2.3-2.5 bar. The methods for tire replacement and maintenance are as follows: Tire replacement method: Park the vehicle in a safe location, turn on the hazard warning lights, and engage the handbrake. Place a triangular warning sign at an appropriate distance behind the vehicle. Retrieve the spare tire, wrench, and jack from the car. After removing the old tire, install the new one. Tire maintenance methods: Regularly clean out stones stuck in the tire treads, minimize exposure to direct sunlight, check tire pressure frequently, pay attention to suspension maintenance, perform periodic front-wheel alignment checks, adopt proper driving techniques, choose smooth road surfaces while driving, avoid objects that could puncture or damage the tires, and steer clear of chemical spills that may corrode the tires.
2
3
Share

What is the displacement of the BMW 8 Series?

BMW 8 Series has a displacement of 3.0 liters. More information about the BMW 8 Series is as follows: 1. The BMW 8 Series is a large coupe under the BMW brand, available in hardtop coupe, convertible, and four-door hardtop versions. 2. The BMW 8 Series is equipped with a 3.0-liter turbocharged inline-six engine, codenamed B58B30C. This engine has a maximum power of 250 kW, with a power band between 5,000 and 6,500 rpm, and a maximum torque of 500 Nm, available from 1,600 to 4,500 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.