Is Rolls-Royce Owned by BMW?

1 Answers
VonKarter
07/29/25 9:36am
Rolls-Royce is a brand under BMW. Here is some information about the Rolls-Royce Phantom: 1. Exterior. The long engine hood, short front overhang, and long rear overhang. The long wheelbase creates a spacious interior, complemented by the vertical front grille and high-mounted headlights, which add an extraordinary temperament. Another characteristic of Rolls-Royce is its roofline, which blends into the sturdy C-pillar at the rear, giving the vehicle a sense of solidity. 2. Powertrain. The Phantom is powered by a specially developed BMW V12, 6.75-liter naturally aspirated engine. After being adapted for the Phantom, the displacement was increased to 6749 mL and features a direct fuel injection system. It achieves a maximum power output of 338 kW at 5350 rpm, and remarkably, when the vehicle speed is at 160 km/h, the engine is only operating at 25% capacity. At 1000 rpm, the torque already reaches 540 Nm, which is about 60% of the maximum torque.
Was this review help?
11
4
Share
More Forum Discussions

What causes the insufficient cooling of the Baojun 730 air conditioner?

It is usually due to a lack of refrigerant or a clogged air filter. Here are the relevant explanations: 1. Refrigerant: Refrigerant, commonly known as Freon, is the working fluid used in refrigeration and air conditioning systems to transfer heat energy and produce a cooling effect. Based on the working method, it can be classified as primary refrigerant or secondary refrigerant. Based on material properties, it can be categorized as natural refrigerant or synthetic refrigerant. 2. Car Air Conditioning: The car air conditioning device (air-conditioning-device), referred to as car air conditioning, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state. It provides a comfortable riding environment for passengers, reduces travel fatigue, and creates good working conditions for the driver, playing an important role in ensuring safe driving as a ventilation device.
16
5
Share

How to Shift to Neutral When the Electronic Gear Lever Has No Power?

Methods to shift an automatic transmission to Neutral when there is no power: 1. Locate a plug marked "SHIFT" near the vehicle's gear lever; 2. Use a pin or other object to pry open the plug by inserting it into the gap; 3. Remove the plug; 4. Insert the vehicle's key into the small hole, or use another long object; 5. After these steps, you can shift the gear to Neutral. Here is more information about automatic transmissions: 1. An automatic transmission does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. 2. In an automatic transmission, the engine power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, an automatic transmission consumes over 10% more fuel than a manual transmission.
11
2
Share

Is it a traffic violation to borrow a lane for a right turn?

Using a straight lane to make a right turn is considered a traffic violation, as it constitutes driving not in accordance with the prescribed lane. To enter a right-turn auxiliary lane from a straight lane, you must first change lanes at an area where lane changes are permitted. Making a turn directly without changing lanes is a violation. Driving a motor vehicle on roads other than highways or urban expressways without following the prescribed lane will result in penalties. Additional information: The "Traffic Safety Implementation Regulations" stipulate penalties for related violations: 1. Driving a motor vehicle on a highway without following the prescribed lane: Penalty standard: 3-point deduction and a fine. 2. Driving a motor vehicle on an urban expressway without following the prescribed lane: Penalty standard: 3-point deduction and a fine. 3. Driving a motor vehicle on roads other than highways or urban expressways without following the prescribed lane: Penalty standard: No point deduction but a fine.
3
2
Share

How to Check a Car's Weight?

A car's weight can be checked using a weighbridge. Here are the relevant details: 1. Gross Weight: The vehicle's registration certificate records the gross weight, which is the sum of the approved load capacity and the car's own weight. Subtracting the approved load capacity gives the car's weight. 2. Weight Range: The weight of an average sedan typically ranges from 1.5T to 2T. Examples of weights for sedans produced in different countries include: Korean cars - Sonata 2.0 weighs 1444 kg, NF 2.4 weighs 1463 kg, Optima 2.0 weighs 1480 kg. American cars - Regal 2.5 weighs 1557 kg, Epica 2.0 weighs 1482 kg, Mondeo 2.0 weighs 1445 kg, Focus 2.0 weighs 1340 kg.
8
4
Share

Why is Michelin 4ST cheaper than 3ST?

Michelin 4ST is cheaper than 3ST due to reduced production costs of the 4ST product. Here are the specific differences between Michelin 3ST and 4ST: 1. Drainage performance: Michelin 4ST features a new tread pattern design through Evergrip technology, increasing drainage space by over 50% compared to 3ST, providing excellent drainage performance. During rainy conditions, a water film easily forms between the tire and the road surface, significantly reducing hydroplaning to a certain extent. 2. Rubber compound: Compared to 3ST, Michelin 4ST adopts a new tread design and new rubber compound, improving wet braking performance and rolling resistance for both new and worn tires, thereby enhancing safety. 3. Safety performance: Official data shows that Michelin 4ST achieves a 2.4m longer wet braking distance than 3ST, which improves driving safety to some extent.
10
5
Share

What do the wheel data J and ET mean?

J represents the shape and height of the wheel flange, while the ET value, also known as the ET offset, refers to the offset. The following are detailed explanations: 1. Considerations for J value installation: If the original tire is 195/65/15 and the standard tire should be 235/45/17, flatter tires are harder to find. During the modification process, based on the J value, the choice of tire width depends on the desired outcome. Selecting a point within the range affects handling and ride quality, with the midpoint offering a balance between the two. Choosing a narrower tire impacts handling, while a wider tire affects comfort. 2. Considerations for ET value installation: Changing the wheel's offset alters the vehicle's track width, which is the distance between the centerlines of the tires. Therefore, simply increasing the wheel and tire size without changing the offset does not affect the track width. Impact of changing the offset: Using a wheel with a smaller positive offset value widens the track width, reducing body roll during cornering and improving the vehicle's cornering speed limit.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.