Is Reporting to 122 Effective When a Car Splashes Water on You?

1 Answers
Parra
07/30/25 12:08am
Reporting to 122 is effective when a car splashes water on you. Here are the specific details about reporting to 122 for a car splashing water: 1. Regulations: According to the Road Traffic Safety Law, motor vehicles should reduce their speed when encountering weather conditions such as sandstorms, hail, rain, snow, fog, or icy roads. 2. Precautions: When encountering water on the road, do not swerve left or right suddenly, brake abruptly, or drive through at high speed, which can cause water splashing and affect the normal passage of surrounding vehicles and pedestrians. Instead, reduce speed in advance and pass slowly. When driving through water, choose the shortest distance, shallowest water level, slowest current, and firmest underwater surface to pass through.
Was this review help?
6
5
Share
More Forum Discussions

Do You Need to Press the Clutch When Braking?

Correct method is to press the brake first, then press the clutch for gear shifting. Here are the relevant introductions: 1. When slightly reducing speed: For example, reducing from 70km/h to 65km/h, in this case, you can directly press the brake without pressing the clutch. 2. When significantly reducing speed but not stopping: For example, if the vehicle is in 5th gear at 70km/h before braking and needs to slow down to 10km/h. In this situation, if you don't press the clutch and directly apply heavy braking, when the speed drops to a certain point (e.g., below 30km/h), the vehicle will start to shake. If the speed drops further or stops, the vehicle may stall. In such cases, you need to press the clutch first and then apply the brake.
15
0
Share

Can Cars Use 95% Alcohol?

Cars cannot use 95% alcohol. Here is an introduction to ethanol gasoline: 1. Introduction to Ethanol Gasoline: Ethanol gasoline is a new alternative energy source formed by blending fuel ethanol processed from grains and various plant fibers with regular gasoline in a certain proportion. According to China's national standards, ethanol gasoline is blended with 90% regular gasoline and 10% fuel ethanol. The application technology of ethanol in gasoline engines is quite mature, and regular gasoline vehicles can use gasoline with 10% ethanol added without any modifications. 2. Production Methods of Ethanol Gasoline: There are two production methods for fuel ethanol: the synthetic method (i.e., ethylene hydration) and the biological method. Due to constraints from crude oil resources and rising ethylene prices, the synthetic method has been replaced by the biological method.
18
5
Share

What is the difference between No. 0 diesel and No. -10 diesel?

The differences between No. 0 diesel and No. -10 diesel are as follows: 1. Different freezing points: The freezing point of No. 0 diesel is 0 degrees Celsius; the freezing point of No. -10 diesel is minus 10 degrees Celsius. 2. Different applicable temperatures: No. 0 diesel is selected when the temperature is above 4 degrees Celsius; No. -10 diesel is selected when the temperature is between 4 degrees Celsius and 5 degrees Celsius. The following is an introduction to diesel: 1. Beverage: Diesel is a light petroleum product, a complex hydrocarbon mixture (carbon atoms number about 10 to 22). It is used as diesel engine fuel. 2. Advantages: The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline, diesel has a higher energy density and lower fuel consumption rate. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.
10
2
Share

What is the actual fuel consumption of the Highlander 2.0t?

The actual fuel consumption of the Highlander 2.0t is 9.6L/km. Here are the specific details about the Highlander: Vehicle Positioning: The Highlander is a car produced by Toyota, which is a large-sized SUV. Configuration: It is equipped with a 6.1-inch central control display screen, with physical buttons on both sides, supporting basic Bluetooth multimedia entertainment system. It is also equipped with the TSS Intelligent Safety Assist System, which includes PCS Pre-Collision Safety System, DRCC Dynamic Radar Cruise Control System, LDA Lane Departure Alert System, and AHB Automatic High Beam function. Chassis: The Highlander adopts front MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension.
1
3
Share

What is the fuel consumption of the CS55 automatic transmission?

The fuel consumption of the Changan CS55 1.5L manual transmission model is 8.6L/100km, with a range of 7.5-9.7L/100km; the 1.5L automatic transmission model has a fuel consumption of 9.2L/100km, with a range of 8-10.5L/100km. The main factors affecting fuel consumption are as follows: Frequent braking and starting: Apart from the car's design and engine factors, the real cause of fuel consumption waste is the driver's habits. Frequent sudden braking and sudden starts are the biggest reasons for increased fuel consumption. Unnecessary increase in vehicle load: Many new car owners like to decorate their cars with various accessories and ornaments. Blindly adding body kits, spoilers, winches, and roof racks can also increase the vehicle's fuel consumption.
12
0
Share

Why does the Regal's idle speed fluctuate up and down?

The fluctuating idle speed of the car indicates that there is an air leak in the intake manifold of the car, or that the throttle body has excessive carbon deposits, causing the cross-sectional area of the air passage to change. This prevents the car's control unit from functioning properly, requiring timely repairs. Relevant information about idle speed is as follows: Introduction: Idle speed is an operating condition of a car, referring to the engine running in neutral gear. The engine speed during idle is called the idle speed. The idle speed can be adjusted by changing the size of the throttle, among other methods. Idle means the engine is producing power without doing work: Driving idle refers to the state when the car is in gear, the accelerator pedal is not pressed or is released during driving, maintaining the minimum opening of the throttle. At this time, the engine speed is the same as the parking idle speed, which is called driving idle.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.