···
Log in / Register

Is Replacing the Ignition Lock Cylinder Harmful to the Car?

4 Answers
VonHaley
07/29/25 2:08pm

After the car is started, attempting to start it again can damage the starter, affecting the gears of the starter motor and the flywheel's teeth. Simply put, it can break the gears. Introduction: Car keys are tools used to start and stop the car. Modern car keys use chips, which are part of a magnetic chip system. Principle: The ignition lock cylinder's read coil reads the chip in the key; each chip contains fixed digital information. Categories: Remote keys allow you to unlock and lock the car from a distance without inserting the key into the lock. The biggest advantage is that, regardless of day or night, you can conveniently unlock and lock the car from afar without needing to locate the keyhole.

Was this review help?
15
3
Share
VanVivienne
08/13/25 6:04am

I think replacing the ignition lock cylinder doesn’t pose much harm to the car, but it’s crucial to have it done by a professional technician. Having driven for over a decade, I’ve encountered situations where the ignition key got stuck and wouldn’t turn—without replacement, the car wouldn’t start at all, not only causing delays but also potentially wearing out other components. After installing a new lock cylinder, the ignition became much smoother. Of course, if an inexperienced apprentice handles the job improperly—like misaligning the pins—it could lead to short circuits or trigger anti-theft system errors, resulting in hazards such as blown fuses or false warning lights. Regular inspections of the ignition system can prevent minor issues from escalating. Overall, as long as the replacement is done correctly, the risks are minimal—it can even extend the car’s lifespan.

Was this review help?
4
5
Share
Expand All
AngeloFitz
10/10/25 7:20am

Replacing the ignition lock cylinder is not expensive, usually costing around a hundred yuan, and it has little impact on the car. Last time I had difficulty starting my car, I went to a reputable repair shop to replace the lock cylinder, and the problem was solved immediately. If not replaced, persistent jamming can damage the engine starter, leading to more costly repairs. If you try to save time by doing it yourself or going to a roadside stall, the installation might not be secure, causing poor contact, which could lead to the car stalling while driving—a dangerous situation. Don’t forget that modern cars have sophisticated anti-theft systems; tampering with the lock cylinder improperly can lock the ECU, causing repair costs to skyrocket. Addressing the issue promptly saves both hassle and money, and the extent of potential harm depends on the professionalism of the service.

Was this review help?
14
1
Share
Expand All
DiReagan
11/23/25 8:30am

If the ignition lock cylinder is broken, replace it promptly without delay. Having it replaced at a reputable repair shop minimizes risks, while DIY attempts may damage the car. When my car key wouldn't turn, replacing the lock cylinder ensured quick starts without delays. However, inexperienced handling may cause short circuits or trigger false anti-theft alarms.

Was this review help?
20
1
Share
Expand All
More Forum Discussions

Should a U-turn yield to straight-going traffic or vice versa?

U-turn should yield to straight-going traffic. Theoretically, straight-going traffic has the highest right of way, so whether turning or making a U-turn, one must yield to straight-going vehicles first. Below are relevant details: Intersections with U-turn signs: Intersections marked with U-turn signs definitely allow U-turns, but they should be made based on actual conditions without obstructing other vehicles or pedestrians. Intersections with U-turn signals: Simply follow the signal instructions and make the U-turn in the designated lane. Locations with early U-turn openings: Many roads have dedicated left-turn or U-turn lanes before reaching the intersection. Drivers should activate the left turn signal in advance and make the U-turn without affecting other normally moving vehicles.
15
4
Share

What is the Difference Between Wet and Dry Transmissions?

Here are the specific differences between dry and wet transmissions in automobiles: 1. Medium: The working principles of dry and wet transmissions are fundamentally the same, both utilizing two clutches for alternating operation. The difference lies in the medium connecting the driving and driven discs. Wet dual-clutch transmissions primarily rely on oil, whereas dry dual-clutch transmissions mainly depend on air. 2. Basic structure: The two sets of clutch plates in a wet clutch are housed in a sealed oil chamber, with the heat absorbed by the transmission oil that soaks the clutch plates. In contrast, the friction plates of a dry clutch do not have a sealed oil chamber and rely on air cooling for heat dissipation.
1
3
Share

What is the fuel consumption of the Yamaha FZ125?

Yamaha FZ125 has a fuel consumption of around 2L. With good driving habits and road conditions, it is common to see the fuel consumption drop to around 1.5L. Here are the details: Relationship with vehicle type: The fuel consumption of a motorcycle is also related to its positioning. For example, a 125cc underbone model typically has lower fuel consumption compared to other models in the same class. However, a 125cc scooter model, which uses a continuously variable transmission (CVT), may have different fuel consumption. Relationship with the engine: The fuel consumption of an EFI scooter is generally above 2L, while a carburetor scooter model consumes more than 2.5L per 100 kilometers. This difference mainly comes from the engine's working method, and the engine's performance itself also has a certain impact on fuel consumption.
12
5
Share

What height is suitable for a motorcycle with an 820mm seat height?

An 820mm seat height motorcycle is suitable for riders who are 180cm tall. Below is a motorcycle seat height to rider height reference table: Motorcycles with a 700mm seat height: suitable for riders 160cm tall. Motorcycles with a 770mm seat height: suitable for riders 170cm tall. Motorcycles with an 810mm seat height: suitable for riders 180cm tall. Riders shorter than 160cm: recommended to ride scooters. Additional notes: Motorcycle seat height is generally related to the model type. Cruisers typically have seat heights of 720-770mm, street bikes 770-800mm, adventure bikes 800-900mm, and off-road bikes around 900mm. Different manufacturers may vary seat heights based on design. Riders who are 165cm tall can ride cruisers and street bikes with seat heights around 770mm. Some adventure bikes have adjustable seat heights, and shorter seat height options are also available.
15
4
Share

What are the differences between Continental UHP and UC6-SUV?

There are mainly the following differences between Continental UHP and UC6-SUV: 1. Tire application range: Continental UHP has a wider application range, basically suitable for SUV rims from small to large, and can also meet the installation requirements of special tires; while UC6-SUV is mainly suitable for some mid-size SUV models, and this type of tire is mainly developed for the Asia-Pacific market. 2. Tire performance: Continental UHP comes in 8 specifications from 16 to 23 inches, with a treadwear index of 420, indicating good wear resistance. In addition, its traction index is the highest AA grade, offering excellent sports performance. Continental UC6-SUV, on the other hand, is optimized for the needs of consumers in the Asia-Pacific region, with corresponding improvements in noise reduction. The biggest advantage of this type of tire is its balance.
8
5
Share

Reasons for Abnormal Noises in the Front of the Car After Turning Off the Engine

Reasons for abnormal noises in the front of the car after turning off the engine are as follows: 1. Uneven engine cooling causing noise: After driving for a period of time, the engine temperature is high. After turning off the engine, the temperature of various components decreases, and thermal expansion and contraction cannot occur uniformly, creating gaps between metal parts inside the engine. Friction during cooling contraction produces noise. In such cases, it is recommended not to turn off the engine immediately after parking; wait for a while. If abnormal noises persist after following this method, it is necessary to visit a 4S shop for inspection. 2. For turbocharged cars, it could also be the sound of the turbo cooling: Under normal circumstances, the exhaust gas temperature reaches 600-700°C, accelerating the rapid rotation of the turbo and generating friction heat. After turning off the engine, thermal expansion and contraction are also very noticeable, resulting in abnormal noises.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.