Is Repairing the Radiator Support Considered a Major Accident?

1 Answers
MacSienna
07/30/25 12:18am
It is considered a major accident vehicle. Repairing the vehicle's radiator support indicates that the front part of the vehicle has been involved in an accident. Damage to the radiator support means that components such as the front bumper, headlights, crash beams, grille, radiator, and engine hood have suffered varying degrees of damage, which can affect the vehicle's driving stability. Below is relevant information: 1. Function of the Radiator Support: The radiator support, also known as the radiator core support, is the frame that holds the headlights, radiator, and other components. It also connects the left and right vehicle frames and helps absorb energy in the event of a front-end collision. When purchasing a used car, it is essential to inspect the radiator support. If only the headlights or bumper have been replaced, it suggests the damage was not severe. 2. Precautions for Buying a Used Car: It is important to verify whether the vehicle is an accident car or a mortgaged car. Only after confirming that the vehicle can be legally transferred should you proceed to inspect its condition. During inspection, check if the radiator support has been repaired or replaced, whether the fenders have been removed, and whether the vehicle has been submerged in water.
Was this review help?
14
2
Share
More Forum Discussions

Does Rust on Car Brake Discs Affect Braking?

No, it does not affect braking. Car brake discs are generally made of cast iron, so they will gradually rust when the vehicle is parked or stored for a period of time. This is a normal phenomenon and does not indicate any quality issues with the brake discs. Below are the effects of rust on car brake discs regarding braking: Minor rust: If there is only slight rust on the surface, it can be removed by performing emergency braking while driving. No special treatment is needed, as minor rust on the brake discs will be naturally worn off during normal braking. Severe rust: If the rust is more severe, it may cause vibrations or shaking during braking, such as brake pad vibration, steering wheel vibration or shaking, or body vibration. In such cases, it is difficult to remove the rust, so it is recommended to perform maintenance on the brake discs every two months to prevent excessive rust development.
9
5
Share

Should You Shift Gear or Engage Handbrake First in an Automatic Transmission?

When starting a car with an automatic transmission, you should shift the gear first and then engage the handbrake. The safest way to start an automatic transmission car is to first press the foot brake, then shift to D (Drive) gear, release the handbrake followed by the foot brake, and finally press the accelerator to complete the start. Some models are equipped with an electronic handbrake, which automatically disengages when the accelerator is pressed. Here is more information about the handbrake: 1. The handbrake primarily functions by activating the braking system to secure the vehicle. When starting, shifting the gear first and then engaging the handbrake allows the car to start in a stable condition. 2. When parking, you should engage the handbrake first and then shift to P (Park) gear. In this scenario, the braking work is performed by the braking system, while the P gear mainly serves as an auxiliary function, allowing the internal components to remain fully relaxed, thereby better maintaining the car's parts and preventing excessive wear. 3. The gear positions in an automatic transmission are relatively simple: D (Drive) is for moving forward, R (Reverse) is for backing up, N (Neutral) is for the neutral position, and P (Park) is for parking.
6
5
Share

Are car headlights covered under the three-year warranty?

Car headlights are not covered under the three-year warranty, as the warranty period is typically two years. Here is some relevant information: Car headlights: As the "eyes" of a car, headlights not only affect the owner's external image but are also closely related to safe driving at night or in bad weather conditions. The use and maintenance of headlights should not be overlooked. Usage precautions: On roads without central barriers or center lines, drivers should switch to low beams when meeting an oncoming vehicle from the opposite direction at a distance of 150 meters. Low beams should also be used when meeting non-motorized vehicles on narrow roads or bridges. High beams should not be used when a following vehicle is driving close to the vehicle in front. If a vehicle breaks down or is involved in an accident on the road, obstructing traffic and making it difficult to move, the hazard warning lights should be turned on, and a warning sign should be placed 50 to 100 meters behind the vehicle. At night, the clearance lights and rear position lights should also be turned on simultaneously.
13
4
Share

How to install ETC for private cars?

ETC can be processed at bank outlets or highway service areas. Professional staff will install the ETC device at the service point. Required documents include the original and photocopy of the vehicle owner's valid ID and vehicle license. If processed by an agent, the agent's valid ID is also required. The photocopy of the vehicle license should include the page with the most recent annual inspection seal. A Postal Savings credit card application form is needed to bind with the ETC card. After obtaining the credit card, swipe it twice and present the POS slip at designated postal outlets to receive and install the ETC onboard unit for free, with no additional charges. Applicants must be aged 18-60 and own the vehicle. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. Here are precautions for ETC installation: Do not obstruct vision - best installed behind the rearview mirror: Many car models have steeply angled windshields that reduce driver visibility. Installing ETC without considering this may increase blind spots. Install it on the right side behind the interior rearview mirror to avoid vision obstruction. Do not affect charging: The ETC electronic tag consumes power but generally doesn't require charging or battery replacement as it has a built-in solar panel. Avoid installing it on the windshield's blackened areas or positions that might block the solar panel. Do not remove arbitrarily after installation: The adhesive contains an anti-tamper rod connected to a switch. When installed, the windshield presses this rod in. Removal causes the rod to pop out and trigger the switch, locking the device. Unlocking requires visiting an ETC service center. This prevents multiple vehicles sharing one device. ETC usage notes: The ETC sensing range is 8 meters. Maintain over 10 meters distance from the vehicle ahead to avoid accidental payment for others due to their faulty ETC. The ETC lane recognition speed limit is 20 km/h - excessive speed may cause reading failure. Insufficient balance on debit cards linked to ETC will also cause payment failure.
15
0
Share

What is the emission standard of the Chevrolet Malibu XL?

The Malibu XL complies with the China VI emission standard. The Malibu XL measures 4933*1854*1472mm, featuring a sharp and dynamic exterior design that highlights a youthful and trendy vibe. The interior layout is stylish with rich configurations, offering multiple powertrain options that are both powerful and robust. Below is an introduction to the Malibu XL: 1. Exterior: The Malibu XL adopts a sharp and dynamic body line design. The front face features a distinctive family-style double-layer grille design, with a hexagonal large-mouth mesh grille below. The side profile showcases dynamic and sharp lines, emphasizing a youthful and trendy aesthetic. The rear end incorporates a fastback design, with a slightly raised "ducktail" spoiler that enhances the sporty feel of the vehicle. 2. Interior: The Malibu XL features a symmetrical "T"-shaped layout, exuding simplicity and elegance. The center console is wrapped in a large area of premium leather material, offering excellent touch and texture, elevating the overall interior quality. The leather-wrapped steering wheel is appropriately sized and thick, providing a comfortable grip. The multifunctional steering wheel buttons allow control over cruise control, the central LCD screen, multimedia, and other functions. The instrument cluster combines analog dials with an LCD display, ensuring clear readability. The central LCD screen displays various information such as fuel consumption and driving range, enhancing practicality. 3. Powertrain: The Malibu XL offers multiple engine options. In addition to the 1.5T turbocharged engine, which is consistent with overseas models, it also provides a 2.5L naturally aspirated engine for domestic consumers. The 1.5T engine delivers a maximum power of 125kW and a peak torque of 252Nm, while the 2.5L engine produces a maximum power of 147kW and a peak torque of 253Nm. The transmission system is paired with a 7-speed DCG and a 6-speed DSS intelligent start-stop transmission.
19
3
Share

Can I turn left if the light turns red after entering the waiting area?

No. When in the left-turn waiting area, generally both directions of traffic have a green light for going straight, and the left-turn arrow is red, so you cannot turn left. You must wait until the left-turn signal turns green to proceed. If the left-turn signal changes from green to red, vehicles intending to turn left must stop before the stop line, but vehicles that have already crossed the stop line and entered the waiting area must continue to turn left and should not remain in the waiting area. More details are as follows: 1. Drivers should be reminded that the left-turn waiting line is not a "stop line." If both the straight and left-turn signals are red, all vehicles must wait behind the previous stop line. 2. If a vehicle has just crossed the stop line when the light turns red but stops immediately, this will not be penalized as running a red light. However, if there is noticeable movement after crossing the line, penalties will apply. 3. The three photos taken by traffic cameras for running a red light are: the vehicle crossing the stop line, followed by two more showing the vehicle moving to the center of the intersection and reaching the opposite side of the intersection.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.