Is Removing Car Doors a Big Deal?

1 Answers
Aurora
07/30/25 10:19am
Removing car doors has significant impacts. Below are relevant introductions about car doors: 1. Function: Car doors provide access for drivers and passengers to enter and exit the vehicle, isolate external disturbances, and to some extent mitigate side impacts to protect occupants. 2. Performance: The aesthetics of a car are also related to the design of its doors. The quality of car doors is mainly reflected in their anti-collision performance, sealing performance, ease of opening and closing, and of course, other functional indicators. Anti-collision performance is particularly important because during a side collision, the buffer distance is very short, making it easy for occupants inside the vehicle to be injured.
Was this review help?
9
1
Share
More Forum Discussions

What is the reason for water dripping from the right front wheel?

The reason for water dripping from the right front wheel is: the car's air conditioning is turned on. Select the appropriate fan speed setting: During normal operation of the car, to prevent excessive frosting of the evaporator, which affects the operation of the air conditioning system, the air supply speed and temperature control should not be set to the lowest for a long time. When the speed is below 25 km/h, the fan speed switch should be set to the low-speed setting to avoid insufficient power generation and insufficient cooling. Single use time of air conditioning: If the temperature inside the car has reached a comfortable level, the air conditioning can be turned off, or turned on again after a while. Prolonged use of the air conditioning will cause excessive pressure on the condenser, which will cause damage to the refrigeration system. Therefore, the air conditioning should not be used for too long each time.
18
4
Share

What to do if the reversing camera sometimes works and sometimes doesn't?

Check whether the reversing light is on. If it is not on, check the reversing fuse or wiring. If it is on, check the reversing camera wiring or the camera itself. Here is an introduction to the reversing camera: 1. Introduction: The reversing camera, also known as the parking assist system, or the reversing visual system, or the on-board monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. 2. Purpose: After years of development, the reversing radar system has upgraded its technology, improved its performance, and been applied to various types of vehicles, such as trucks, buses, school buses, combine harvesters, corn harvesters, coaches, and engineering machinery. 3. Advantages: Installation is simple. Generally, a single-output reversing camera only requires connecting the positive power wire to the positive terminal of the reversing light power supply, and the negative power wire to the negative terminal of the reversing light or to the ground (GND). The wiring can be easily understood by studying the vehicle model, and the camera can be installed by drilling a hole in an easy-to-install position.
4
2
Share

How to eliminate the fault light of BYD F3?

The methods to eliminate the fault light of BYD F3 are: 1. Try to start and turn off the vehicle three times in a row, or turn off the engine and disconnect the negative terminal of the battery, wait for 30 seconds, reconnect it, and then try to start the vehicle; 2. If it still doesn't work, you need to go to a 4S store to use a fault detector to troubleshoot before it can be eliminated. The reasons for the engine light to come on include: 1. Sensor problems; 2. Maintenance issues; 3. Fuel quality problems. The BYD F3 is an A+ class passenger car from BYD Auto, with a body length, width, and height of 4533mm, 1705mm, and 1490mm respectively, a wheelbase of 2600mm, a body weight of 1200 kg, a fuel tank capacity of 50 liters, and a top speed of 170km/h.
2
0
Share

How to use the Lingdu HS610A?

Usage instructions for the Lingdu HS610A: 1. Press the power button to turn it on, briefly press the menu button to bring up the function settings menu, and repeatedly press this button to toggle between different settings; 2. For recording and taking photos, press the confirm button. In video mode, briefly press this button to start recording, and press it again to stop recording; 3. Briefly press the mode selection button to switch between video, photo, and playback modes. The dimensions of the Lingdu are 4615mm in length, 1826mm in width, and 1425mm in height, with a wheelbase of 2656mm. The Lingdu is equipped with EA211DJR and EA211DJS engines, paired with a manual transmission and a 7-speed dual-clutch transmission. The lower-powered EA211DJR has a maximum power of 96kW, maximum horsepower of 131PS, and maximum torque of 225Nm; the higher-powered EA211DJS has a maximum power of 110kW, maximum horsepower of 150PS, and maximum torque of 250Nm.
17
2
Share

Will a Damaged Exhaust Valve Cause the Air-Fuel Mixture to Be Too Rich or Too Lean?

A damaged exhaust valve will cause the air-fuel mixture to be too lean. The function of the car exhaust valve: It allows a portion of the exhaust gas to recirculate back into the cylinder for combustion. This small amount of exhaust gas reduces the temperature inside the cylinder during combustion. Since the air-fuel mixture is generated under high-temperature and oxygen-rich conditions, this process suppresses the formation of the mixture, thereby reducing the amount of exhaust emissions. Effects of a damaged exhaust valve: When the exhaust valve is damaged, it cannot control the amount of exhaust gas recirculation. Excessive exhaust gas participating in recirculation will affect the ignition and performance of the air-fuel mixture, thus impacting the engine's power output. This is particularly noticeable during engine idle, low-speed operation, light load, and cold starts, where the recirculated exhaust gas significantly affects engine performance.
9
2
Share

What tires are used for the Toyota Levin?

Toyota Levin tires use the Yokohama brand, with the following details: 1. Yokohama focuses on quietness, comfort, and balanced overall performance. 2. The tire size parameter specification for the Levin is 195/65R15. Below is some additional information about tires: 1. Tires are round, elastic rubber products mounted on various vehicles or machinery for ground rolling. 2. They are typically installed on metal rims to support the vehicle body, cushion external impacts, ensure contact with the road, and maintain driving performance. 3. Tires often operate under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during use, thus requiring high load-bearing, traction, and cushioning capabilities. 4. Tires also need to have high wear resistance and flexibility, as well as low rolling resistance and heat generation. 5. Half of the world's rubber consumption is used for tire production, highlighting the significant rubber demand for tires.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.