Is Porsche's Dual-Clutch Transmission the Same as Volkswagen's?

What is the ECO mode in cars?

ECO refers to the car's economical driving mode function. ECO is an English abbreviation formed by the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and non-active eco driving mode. When the eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active eco mode does not have a dedicated button. When the dashboard eco indicator light illuminates, it merely serves as a reminder function. The eco mode automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most cars utilize the active eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can generally activate the eco mode. However, it is unnecessary to enable eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not reflect the fuel-saving characteristics of eco mode and could instead affect the vehicle's power performance. Additionally, the eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the eco mode will not operate in such scenarios.

18

2

Share

How to Start a Mercedes-Benz?

Most Mercedes-Benz vehicles are equipped with a one-button start system. The owner only needs to carry the car key into the vehicle, ensure the gear is in the P position, depress the brake pedal, and then press the start button to ignite the engine. Do not release the brake pedal at this time; simply shift into D gear to start driving. Below is more information about Mercedes-Benz: 1. Currently, Mercedes-Benz sells the following product lines in China: Sedans - S-Class, E-Class, C-Class; Sports Cars - SLK Roadster, CLK Sports Car, CLS Coupe, CL Large Luxury Coupe, SL Luxury Sports Car; SUV Series - R-Class Large Luxury Sports Tourer, ML Multi-Purpose Off-Road Vehicle, GLK Mid-Size Luxury Off-Road Vehicle, GL Luxury Off-Road Vehicle, G-Class Off-Road Vehicle; B-Class Luxury Sports Tourer; along with nearly 40 models under the Mercedes-AMG, smart, and Maybach brands. 2. Mercedes-Benz has created numerous world firsts. This list of world firsts includes: the first supercharged car, the first mass-produced diesel sedan, the first mass-produced car equipped with a four-stroke fuel injection engine, the first five-cylinder engine, the first turbocharged diesel sedan, and more.

3

2

Share

Why does the Suzuki UY125 have a single rear shock absorber?

Suzuki UY125 adopts a single rear shock absorber because the unilateral suspension provides excellent cornering performance. In terms of body dimensions, the Suzuki UY125 measures 1890mm in length, 685mm in width, 1090mm in height, with a seat height of 730mm and seat length of 670mm. Below is an introduction to scooters: Working principle of scooter transmission system: The principle of a scooter's transmission mechanism involves two pulley disks connected by a drive belt. When the engine runs at idle speed, the two pulley disks and the drive belt remain loose and cannot propel the motorcycle forward. As the engine speed increases, the two pulley disks, under centrifugal force, begin to engage more tightly with the belt, and the gear ratio changes. The higher the engine speed, the greater the change in gear ratio, resulting in faster vehicle speed. Maintenance of scooter transmission system: After the motorcycle transmission cover is installed, the fan guide on the front pulley disk creates a directional airflow inside the transmission case. This serves two purposes: first, it cools the transmission system, and second, it blows out dust generated during the operation of the transmission system to prevent excessive wear of internal components.

1

5

Share

How Long Can a Car Run After Running Out of Fuel?

Strictly speaking, a car cannot continue to drive once it runs out of fuel. However, if the fuel warning light comes on, most manufacturers design the system so that when the fuel level warning light illuminates (indicating the lower limit), there is typically enough fuel left to travel approximately 80-150 kilometers. The exact distance depends on the vehicle model, road conditions, and fuel consumption. Additional information: 1. The remaining driving range when the fuel light comes on varies by road conditions: 1. On highways, the remaining range is about 120-160 kilometers; 2. In mixed driving conditions, the remaining range is about 80-120 kilometers; 3. In congested traffic, the remaining range is about 30-60 kilometers. 1. Some vehicles have a red line on the fuel gauge, indicating that there is still about 10% of fuel left in the tank when the needle reaches this point. This is usually sufficient to reach a gas station, though the exact range may vary by vehicle. For example, the Volkswagen Magotan 1.8T has a 66L fuel tank, but it can be filled up to 68L when the pump automatically stops. When the fuel gauge needle reaches the red line, it can still travel approximately 70 kilometers.

14

1

Share

How to Remove Cement Spilled on a Car?

Here are the methods to deal with cement spilled on a car: 1. Before it hardens, you can wet it with clean water and rinse it off, then use a towel with cleaning solution to wash it. 2. If the cement has already hardened, you can use an acidic solution to clean it, such as common white vinegar. White vinegar is an acidic liquid that can effectively dissolve cement. Pour white vinegar onto the cement attached to the car, wait a few minutes for the cement to soften, and it will be easier to clean. However, multiple cleanings are usually required to thoroughly remove it. Be meticulous and patient during cleaning, avoiding rough scrubbing to prevent damage to the car paint. 3. You can also purchase a cement cleaner for washing, following the same method as with white vinegar. For small areas of cement, consider cleaning it yourself. For large areas, it is recommended to go to a professional car wash shop where specialized cleaning agents are used for a more professional and hassle-free cleaning experience. Additional Information: 1. Cement: A powdery hydraulic inorganic binding material. When mixed with water, it forms a paste that can harden in air or better in water, firmly binding materials like sand and stone together. 2. Early mixtures of lime and volcanic ash were very similar to modern lime pozzolan cement. Concrete made by binding crushed stone with it not only achieves high strength after hardening but also resists erosion from fresh or saltwater. For a long time, it has been an important binding material widely used in civil engineering, water conservancy, national defense, and other projects.

10

5

Share

What is the fuel tank capacity of the Jinjila 300?

The Jinjila 300 has a fuel tank capacity of 15 liters. The dimensions of this model are 2120 mm in length, 836 mm in width, and 1050 mm in height, with a wheelbase of 1420 mm. The Jinjila 300 is equipped with a V-type water-cooled twin-cylinder engine with an actual displacement of 300CC, delivering a maximum power output of 22.5KW. Fuel-saving tips: Start in first gear, as it provides high torque at low RPM to overcome the resistance of a stationary vehicle. This allows the engine to warm up sufficiently, ensuring all components expand to their optimal state. Good combustion sealing maximizes fuel efficiency, resulting in minimal fuel consumption. Shift to second gear only after the engine reaches 3000 RPM or higher. Starting in second or third gear requires higher RPMs, which can lead to unstable engine speeds and increased fuel consumption if not maintained properly. Maintenance intervals: After every 1000–2000 kilometers of riding, lubricate the necessary parts as specified and tighten any exposed bolts or nuts. The break-in period for this motorcycle is 1500 kilometers. There are various oil change methods recommended during this period, such as changing the oil at 300 km, 600 km, 1000 km, and 1500 km. After the break-in period, maintenance can be performed every 2000 kilometers.

9

1

Share

Is Porsche's Dual-Clutch Transmission the Same as Volkswagen's?

What is the ECO mode in cars?

How to Start a Mercedes-Benz?

Why does the Suzuki UY125 have a single rear shock absorber?

How Long Can a Car Run After Running Out of Fuel?

How to Remove Cement Spilled on a Car?

What is the fuel tank capacity of the Jinjila 300?

How to Match the Throttle of Haval H9?

How to Replace the Battery in a Trumpchi GS4 Key?

Is the Sagitar equipped with an AT transmission?

Is the Suzuki Swift still available at 4S stores?