Is Piston Ring Release Agent Harmful to the Engine?

1 Answers
Earl
07/30/25 10:12am
Engine internal cleaner, also known as cleaning fluid, is an automotive maintenance product used to remove harmful substances such as sludge, carbon deposits, and gum from inside the engine, keeping the engine interior clean, enhancing oil fluidity, reducing wear, and extending the engine's service life. Below is extended information about release agents: Introduction: Engine cleaning involves both internal and external parts. The external part of the engine is exposed in the engine compartment and is generally cleaned less frequently. Therefore, the commonly referred engine cleaner is the internal engine cleaner, or cleaning fluid, designed to remove harmful substances like sludge, carbon deposits, and gum from inside the engine, maintaining internal cleanliness, improving oil flow, reducing wear, and prolonging the engine's lifespan. Due to the precision of engine construction, engine cleaning is typically performed without disassembly, hence the term "no-disassembly engine cleaner."
Was this review help?
8
3
Share
More Forum Discussions

Can a C1 driver's license be used for point deduction on behalf of others?

C1 driver's license cannot be used for point deduction on behalf of others, as it is an illegal practice. Organizing others to accept traffic violation penalties and point deductions on behalf of actual motor vehicle drivers for economic gain will result in confiscation of illegal income and detention for up to 15 days. Age requirements for applying for a C1 driver's license: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 or above must pass tests on memory, judgment, and reaction abilities. Vehicle types permitted with a C1 license: The scope of vehicles permitted with a C1 driver's license includes small and micro passenger vehicles, as well as light and micro cargo vehicles; light, small, and micro special purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Vehicles not permitted with a C1 driver's license: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery vehicles, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with an overall length exceeding 6 meters.
10
1
Share

What is the normal RPM for shifting gears in a manual transmission?

Manual transmission shifting RPM is normal between 700 and 800 RPM. The car's RPM refers to the engine speed, and its functions are: 1. To promptly reflect the engine's operating condition; 2. To allow the driver to better coordinate the transmission gear and throttle position; 3. To keep the car in a better working state; 4. To reduce consumption and prolong the engine's lifespan. The significance of engine RPM is: The level of engine RPM relates to the number of work cycles per unit time or the effective power of the engine, meaning the engine's effective power varies with different RPM. The car's tachometer is located on the instrument panel, symmetrically placed with the speedometer.
17
5
Share

What is the difference between a groupset and a complete groupset?

The small groupset only includes the shifting system, while the complete groupset adds the drivetrain system, braking system, and hubs. Below is relevant information about small and complete groupsets: 1. A standard small groupset includes: shifting system (front and rear shifters, front and rear derailleurs). 2. A standard medium groupset includes: shifting system (front and rear shifters, front and rear derailleurs), drivetrain system (crankset assembly, cassette assembly, chain). 3. A standard complete groupset includes: shifting system (front and rear shifters, front and rear derailleurs), drivetrain system (crankset assembly, cassette assembly, chain), braking system, and hubs.
19
0
Share

Where is the child lock button located on the Golf?

The child lock button on the Golf is located on the side of the rear doors. You can see it when you open the door. The child safety lock prevents children from opening the rear doors from inside the car, avoiding accidental door openings during driving. The Golf is a compact car under FAW-Volkswagen. Taking the 2021 Golf as an example, its body dimensions are: length 4296mm, width 1788mm, height 1471mm, with a wheelbase of 2636mm and a trunk capacity of 380l. The 2021 Golf is equipped with a 1.2l turbocharged engine, with a maximum horsepower of 116ps, a maximum power of 85kw, and a maximum power speed of 5000rpm per minute, paired with a 7-speed dual-clutch transmission.
8
1
Share

How to Use Cruise Control in BMW 525?

Press the cruise control switch. Below is a detailed introduction about cruise control: 1. Press the cruise control switch. When the vehicle reaches the desired speed, press the cruise key once, which is located next to the switch. Then, you can release the accelerator, and the vehicle will maintain the speed at which it was traveling. If you encounter an emergency situation and apply the brakes, the cruise control will immediately deactivate. After the emergency, you can reactivate the cruise control. 2. Do not use the speed control system when driving on roads with heavy traffic or poor road conditions (such as slippery surfaces, loose gravel, or roads after heavy rain): Once the system is activated and the speed exceeds 40 km/h, be careful not to depress the clutch pedal or shift the gear lever into neutral, as this may cause the engine to over-rev and result in damage.
15
3
Share

Where is Lynk & Co manufactured?

Lynk & Co vehicles are manufactured at the Zhangjiakou factory, which belongs to the Geely Auto Group. The models under the Lynk & Co brand include the Lynk & Co 01, Lynk & Co 02, Lynk & Co 03, and Lynk & Co 05. Taking the 2020 Lynk & Co 05 as an example, its body dimensions are: length 4592mm, width 1879mm, height 1628mm, with a wheelbase of 2734mm. The body structure is a 5-door, 5-seat SUV crossover. The 2020 Lynk & Co 05 is equipped with a 2.0T turbocharged engine, with a maximum power of 187kW and a maximum torque of 350Nm. It is paired with an 8-speed automatic transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.