Is Ozone Sterilization Necessary for Cars?

1 Answers
LaIker
07/30/25 12:08am
It is necessary to perform ozone disinfection for cars. Reasons: The main purpose of car ozone disinfection is to kill bacteria and eliminate odors. Additional Information: Ozone Disinfection: Car ozone disinfection refers to the air disinfection of the driving space. A certain concentration of ozone gas is introduced into the car and maintained for 15-20 minutes, mainly to kill harmful bacteria in the air and eliminate smoke odors and other unpleasant smells inside the car. Scope of Ozone Disinfection: The main purpose of car ozone disinfection is to kill and eliminate odors, smoke smells, sweat odors, foul smells, fibers, airborne molds, viruses, airborne bacteria, mites, pollen, dust, dander, benzene, toluene, xylene, total volatile organic compounds (TVOC), formaldehyde, carbon monoxide, carbon dioxide, and nitrogen oxides from car exhaust, among other substances. Therefore, car ozone can be used to remove harmful substances in new cars.
Was this review help?
13
4
Share
More Forum Discussions

What is the reason for the thermostat not opening?

The reasons why the thermostat does not open: The thermostat cannot open after being damaged, which is the most common and severe situation; The water temperature is too low, and the thermostat cannot open because the temperature does not reach the opening threshold, which is also relatively common; Prolonged disuse leading to rust and adhesion, which is less common. Below are the relevant details: 1. The function of the thermostat: It automatically adjusts the amount of water entering the radiator based on the coolant temperature, altering the water circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate temperature range; 2. Maintenance status: The thermostat must maintain good technical condition, otherwise it will severely affect the normal operation of the engine. For example, if the main valve of the thermostat opens too late, it will cause the engine to overheat; if the main valve opens too early, it will prolong the engine's warm-up time, resulting in the engine temperature being too low.
19
3
Share

How to Learn Traffic Laws to Reduce Points?

To learn traffic laws and reduce points, you need to go to the relevant public security bureau for study and examination. The following is an introduction to learning traffic laws to reduce points: 1. Introduction: The point reduction program through learning traffic laws is a measure for drivers holding a driver's license who have been penalized with points due to traffic violations. By participating in online traffic safety learning and passing the examination, they can have their points reduced. 2. Background: As one of the first pilot provinces in China to implement the 'point reduction through learning traffic laws' reform measures determined by the Traffic Management Bureau of the Ministry of Public Security, Hunan Province bears the responsibility of pioneering and exploring the path. 3. Legal Basis: On January 14, 2020, the Ministry of Public Security issued the 'Notice on Printing and Distributing the Work Standards for Reducing Points of Road Traffic Violations by Accepting Traffic Safety Education (Trial)' (Public Traffic Management [2020] No. 14).
5
4
Share

Can fog lights only be turned on in foggy weather?

There is no clear regulation stating that fog lights can only be used in foggy weather. They can also be turned on when visibility is poor or during heavy rainfall, depending on the situation. Function of fog lights: Fog lights are designed to make your vehicle visible to others in foggy or rainy conditions, so they require high brightness and strong penetration. Ordinary LED daytime running lights or headlights cannot meet these requirements. Precautions for driving in fog: When visibility is less than 1 kilometer in foggy weather, you must turn on your headlights and rear fog lights. Turning on the headlights is not only for seeing the vehicle ahead but also to alert the vehicle in front. Otherwise, the leading vehicle may have difficulty noticing a following car when changing lanes in heavy fog, increasing the risk of a rear-end collision. Do not use high beams at night in foggy conditions. High beams are designed for wide-area illumination and can cause scattering in fog, creating a bright, white glare that reduces the driver's visibility of the road ahead.
4
4
Share

Is it better to ventilate a new car during the day or at night?

Ventilating a new car can be done either during the day or at night, as long as it's done when the car is not in use. Duration of ventilation for new cars: As is widely known, the release period of formaldehyde in new homes is quite long, and the same applies to new cars. Formaldehyde is slowly released from the interior and is difficult to completely remove. Therefore, the more practical approach is to stabilize formaldehyde levels within a safe range. The release period of formaldehyde can last from 3 to 15 years. The peak release period is the first 3 months, after which the release volume enters a continuous, stable, and low-emission phase. Methods to remove formaldehyde: Activated carbon is a traditional physical adsorption material that has been highly praised for dealing with pollution inside and outside the car. It has a large surface area and strong adsorption capacity, but its adsorption ability is limited and does not include decomposition functions. It needs to be replaced regularly during use to avoid secondary pollution when saturated.
10
4
Share

What is the function of the rear bumper light?

The function of the rear bumper light is to provide signals to the vehicles behind during driving, such as brake lights, fog lights, width test lights, reverse lights, turn signals, hazard lights, etc. Introduction to the rear bumper light: The rear bumper light is also called a side light. On certain models, the bumper light is commonly referred to as a fog light, which varies depending on the vehicle model. If the rear bumper light is a fog light, there is usually only one. On some models, the lights on the bumper are purely decorative and do not have bulbs, but they still serve a reflective function. The function of the rear bumper light: Fog lights are installed on the front and rear of a car to illuminate the road and alert vehicles in front and behind to maintain distance during rainy or foggy weather. "When driving in fog, the first choice must be to turn on the fog lights." The visibility range of vehicle headlights is generally only 30 to 50 meters, while the visibility range of fog lights can reach about 100 meters.
15
5
Share

How to Determine if a Tire is Punctured or Just Flat?

Check whether the sidewall and inner edge of the tire are damaged. The extent of damage to the tire sidewall can be directly observed, with severe cases showing cracks or bulges. Damage to the inner edge of the tire can only be inspected after removing the tire. Below is an introduction to tire air leakage: 1. Overview: Driving with underinflated tires is the root cause of blowouts. When a vehicle is driven with insufficient air pressure (tire pressure below the standard level), the friction between the tire and the ground increases exponentially, causing a sharp rise in tire temperature, softening of the tire, and a significant drop in strength. Under these conditions, high-speed driving may lead to a tire blowout. 2. Hidden Dangers: Even at low speeds, driving with underinflated tires can damage them, with a long latency period and high concealment, posing greater hazards and laying the groundwork for future blowouts during high-speed driving. 3. Causes: If the tire is punctured by a nail or other sharp object without immediate rupture, it may start leaking air, eventually leading to a blowout.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.