Is Ozone Disinfection Useful for Sedans?

2 Answers
OCody
07/24/25 1:18am
Ozone disinfection for cars is effective, as it has a significant killing effect on many bacteria, molds, viruses, fungi, protozoa, and oocysts. Below are the specific advantages and disadvantages of ozone disinfection for cars: 1. Advantages: The benefits of ozone disinfection lie in its simplicity and speed of operation, requiring very little time, and providing thorough disinfection results. However, it is essential to clean the interior before ozone disinfection; otherwise, the disinfection will only address the symptoms rather than the root cause. 2. Disadvantages: After ozone disinfection, one should not enter the car immediately, as high concentrations of ozone can easily cause symptoms such as coughing, nausea, and chest tightness. Additionally, prolonged use of ozone disinfection can lead to the aging of rubber materials inside the car.
Was this review help?
12
2
Share
DiJune
08/10/25 8:58pm
I used to have a used car with a terrible smell, and I found ozone disinfection quite effective. Ozone gas has strong penetration power, capable of killing bacteria, viruses, and mold inside the car, and it works noticeably well in removing smoke or sweat odors. I chose a professional shop and spent 300 yuan. After the treatment, the air inside the car became much fresher, and I no longer sneezed constantly while driving as before. However, it's important to note that too high a concentration of ozone can damage rubber or plastic parts in the car and may also irritate the respiratory system, so I ventilated the car for several hours before driving it again. Also, don't do it too frequently; once every six months is sufficient. It's safer to use a vacuum cleaner regularly for cleaning. Overall, it's useful but should be used reasonably, and don't opt for unreliable services just to save money.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

Does Using Car Heater Consume Fuel?

Using the car heater does consume fuel. Although the heating system primarily utilizes waste heat from the engine, when the interior temperature doesn't meet requirements, the engine needs to perform additional work to deliver heat, which naturally increases fuel consumption. The warm air shouldn't be directed straight at the head, as prolonged exposure to hot air can cause driver fatigue. For extended heater use, it's advisable to periodically activate the external circulation mode or leave a small window gap. The car air conditioning system is an air regulation device installed in vehicles, serving three main purposes: 1) Cooling, heating, ventilating and purifying cabin air; 2) Providing passengers with a comfortable environment; 3) Reducing driver fatigue and improving driving safety.
18
1
Share

How much transmission fluid should be added to the Corolla Hybrid?

Corolla Hybrid requires 4 liters of transmission fluid. Transmission fluid is essential for maintaining the cleanliness of the transmission system, ensuring normal operation, and extending the service life of the vehicle's transmission components. The Corolla Hybrid is a compact 4-door, 5-seater sedan produced by FAW Toyota, with dimensions of 4635mm in length, 1775mm in width, and 1470mm in height, and a wheelbase of 2700mm. In terms of power, the Corolla Hybrid is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 98ps, a maximum power output of 72kw, and a peak torque of 142nm, paired with an electronic continuously variable transmission.
9
3
Share

Should Wheel Alignment Be Done for Vehicle Pulling?

Whether wheel alignment is necessary for vehicle pulling depends on the specific cause. If it's a slight pull due to tire pressure, simply replenishing the air pressure will suffice. However, if the pulling is caused by incorrect wheel alignment parameters, then a wheel alignment is required. Situations that necessitate a wheel alignment include: 1. The steering wheel feels heavy, shakes, pulls to one side, is off-center, or doesn't return to position while driving; 2. Uneven tire pressure and tread wear; 3. Wheel vibration or wobbling; 4. The vehicle pulls to one side. The working principle of wheel alignment is based on the four-wheel parameters of the vehicle, adjusting them to ensure good driving performance and a certain level of reliability.
7
1
Share

What is the engine brand of Dongfeng Fengguang 580?

Dongfeng Fengguang 580's engine brand is Fiat. An engine is a machine that can convert one form of energy into another, typically converting chemical energy into mechanical energy. The Dongfeng Fengguang 580 is a mid-size SUV with dimensions of 4700mm in length, 1845mm in width, and 1715mm in height, a wheelbase of 2780mm, a fuel tank capacity of 58 liters, and a curb weight of 1490kg. In terms of power, this vehicle is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 139PS, a maximum power of 102kW, and a maximum torque of 187Nm, paired with a 5-speed manual transmission.
2
1
Share

What color is the brake light wire of the Tiida?

The brake light wire of the Tiida is red. The brake light is generally installed at the rear of the vehicle, and the main body color is red to enhance the penetration of the light source, so that the vehicles behind can easily detect the braking of the vehicle ahead even in low visibility conditions, thereby preventing rear-end collisions. The Tiida is a compact car with a length, width, and height of 4393mm, 1766mm, and 1539mm respectively, a wheelbase of 2700mm, and a curb weight of 1180kg. The Tiida is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum torque of 155Nm, and a maximum power of 96kW, paired with a 5-speed manual transmission.
3
5
Share

What is the difference between R17 and R18 tires?

The difference between R17 and R18 tires lies in the wheel diameter: R17 refers to radial tires with a rim diameter of 17 inches; R18 refers to radial tires with a rim diameter of 18 inches. Radial tires are pneumatic tires where the cord plies in the carcass run from one bead to another at approximately 90 degrees to the centerline of the tread. Tires are circular elastic rubber products mounted on various vehicles or machinery for ground contact and rolling, typically installed on metal rims. They feature high load-bearing capacity, traction performance, cushioning ability, excellent wear and flex resistance, as well as low rolling resistance and heat generation.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.