···
Log in / Register

Is overtaking on a yellow dashed line considered driving against traffic?

4 Answers
DeHarley
09/03/25 4:28am

Overtaking on a yellow dashed line is not considered driving against traffic. Below is relevant information about yellow dashed lines: 1. Introduction: Yellow dashed lines are indicative markings used to regulate and guide traffic. They can be used in conjunction with signs or independently. For example, making a U-turn where it is not allowed or turning left where left turns are prohibited are both violations of prohibitive markings. 2. Penalties for driving against traffic: Driving a motor vehicle on highways or urban expressways without wearing a seatbelt, failing to enter the guiding lane in the direction of travel at signal-controlled intersections, carrying passengers exceeding the approved capacity by less than 20%, borrowing the opposite lane to overtake or occupying the opposite lane when encountering queued or slow-moving vehicles ahead, weaving through waiting vehicles, and making or receiving phone calls while driving will result in a deduction of two points.

Was this review help?
20
4
Share
Ella
09/15/25 6:02am

I think this is a great question. We often encounter yellow dashed lines while driving, which are actually meant for overtaking, not for driving in the opposite direction. Driving in the opposite lane can lead to serious accidents, such as rear-end collisions or head-on crashes. Overtaking on a yellow dashed line simply means briefly crossing the line in the same direction to complete the maneuver, as long as the road ahead is clear and there are no oncoming vehicles. I remember last year on a country road, I overtook a slow-moving vehicle using the dashed line—it was smooth and safe. The key is to signal in advance, check the mirrors, and avoid staying over the line for too long. If misjudged, like overtaking on a blind curve, it might accidentally turn into driving in the opposite direction, but that’s not the fault of the dashed line itself—it’s human error. So, overtaking on a yellow dashed line is legal, but you must always prioritize safety and not treat it as a foolproof solution.

Was this review help?
14
0
Share
Expand All
SanNatalie
10/29/25 6:41am

Hey, as someone who drives frequently, I understand why some people might think overtaking on a yellow dashed line feels like driving in the opposite lane, but it's actually completely different. Driving in the opposite lane means you're on the wrong side of the road, which could lead to fines, points deducted, or even fatal accidents. Overtaking on a yellow dashed line, however, is designed to allow you to temporarily cross the line to pass slower vehicles, like when you're stuck behind an elderly driver's car—just speed up and pass. The key is to assess the road conditions: do it when the sunlight is good and visibility is clear, and avoid taking risks in foggy weather or on mountain roads. I've had my own experience—once on the highway, I used the dashed line to overtake a large truck smoothly. But if you don't check for oncoming traffic before overtaking, you might end up swerving into the opposite lane, which could lead to disaster. In short, this isn't the same as driving in the opposite lane; it's a compliant maneuver, provided your skills are solid and your mindset stays grounded.

Was this review help?
12
1
Share
Expand All
Vera
12/12/25 6:54am

From my perspective, overtaking on a yellow dashed line is absolutely not equivalent to driving in the opposite lane. Driving in the opposite lane is a serious violation, often leading to head-on collisions; overtaking on a dashed line is an allowed and safe maneuver, solely aimed at improving efficiency. When driving, timing judgment is crucial: I only dare to overtake when there are no oncoming vehicles and the road is straight, otherwise the risk is high. I always remind myself on the road not to be greedy for speed when overtaking, ensuring sufficient distance and reaction time. In case of a mistake, such as crossing the line too aggressively, it's easy to slide into the opposite lane, but that's an isolated incident and doesn't count as driving in the opposite lane by definition. Safety first, and it's all about forming good habits.

Was this review help?
20
4
Share
Expand All
More Forum Discussions

What to Do If the Rearview Mirror Glass is Loose?

Use pliers to grip the metal shaft and rotate it appropriately, allowing the spring to pop up and secure the seat firmly. Forcing it in the opposite direction may cause damage, and after normal rotation, it might become loose when returning to position. After forcibly rotating the rearview mirror in the opposite direction, the spring is compressed, causing internal misalignment. The compressed spring cannot rebound, leading to looseness between the mirror body and the mirror base. Pry open the reinforced circular area in the middle to observe the rotating shaft. During assembly, press down on the circular metal piece until it locks into place, using the spring to tightly integrate the mirror body with the mirror base.
19
3
Share

What does 2.0e mean?

"2.0e" refers to the version or model variant of a car, where 2.0 indicates the engine displacement and "e" represents the model code or grade. Below are the relevant details: 1. Model configurations: Different versions come with varying configurations. The 2.0G model is equipped with features like ESP (Electronic Stability Program), a leather steering wheel, and electrically adjustable multifunction seats. The 2.0S model includes paddle shifters, a sporty self-illuminating dashboard, and dual exhaust pipes. 2. Model versions: The G series is an upgraded version based on the original 2008 model, while the V series is the highest configuration version. HYBIRD denotes the hybrid powertrain version. These are all version codes, and each manufacturer uses them differently.
1
1
Share

How to Activate One-Touch Window Lift for KAMIQ?

Press the button to the first position; applying excessive force will reach the second position. Release the button once the window reaches the desired position. Pull the switch to the first position and hold it there. Once the window moves to the desired position, use the lock and unlock buttons on the key fob for one-touch window operation. Before setting the buttons on the armrest, first start the engine. Press and hold the switch to lower the window completely for 5 seconds, then press and hold to raise it to the top for 5 seconds before releasing.
14
3
Share

Why Does the Car Smell Like Gasoline?

Car smelling like gasoline may be due to overfilling the fuel tank, leakage in the fuel line, or aging of the rubber hoses in the gasoline vapor canister. Owners should avoid filling the tank to the brim as overflow can damage the canister. If there's a fuel line leak, the gasoline odor may enter the car through the air conditioning system. Leaks typically occur at the joints between pipes, which can be inspected by opening the engine hood. If there's a leak, dust will accumulate over time, forming a greasy residue. Some owners replace or disassemble the fuel pump, and the gasoline smell inside the car might result from not cleaning up residues after the procedure. Generally, fuel pump disassembly is only necessary during replacement or related repairs.
2
2
Share

What causes the high temperature gauge reading on Wuling Hongguang?

The reasons and solutions for the high temperature gauge reading on Wuling Hongguang are as follows: 1. Insufficient coolant in the cooling system causing engine overheating. Solution: Stop the vehicle, wait for the engine to cool down, and add coolant. 2. Water pump or fan belt being too loose or broken, leading to engine overheating. Solution: Visit a repair shop to replace the relevant components. 3. Radiator guard mesh or radiator core ventilation duct being blocked by debris, resulting in poor heat dissipation and engine overheating. Solution: Replace the radiator guard or clean the debris. 4. Insufficient engine oil or substandard oil quality causing engine overheating. Solution: Simply replace with high-quality engine oil.
14
2
Share

How to Set the Time on a 7th Generation Accord?

To adjust the time on the dashboard of a 7th generation Accord, follow these steps: 1. Start the car and press the "SOUND" button. Release the button when the dashboard emits a sound, and the time will start flashing. 2. Use the "NR" button and the "DISC-" button to adjust the time. 3. Once all adjustments are complete, press the "SOUND" button again to confirm. Here are some highlights about the 7th generation Accord: 1. The most notable feature of the 7th generation Honda Accord is its i-VTEC engine, which combines fuel efficiency with high performance. 2. The 7th generation Accord blends European simplicity with American boldness in its design, appearing more robust compared to previous Japanese models.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.