Is Overtaking from the Right Side Allowed?

1 Answers
OCharles
07/29/25 2:25pm
Overtaking from the right lane is not the same as overtaking on the right. Overtaking on the right refers to the act of driving in the same lane as the vehicle ahead, then overtaking it from the right side before returning to the original lane. Overtaking on the right is illegal. If you overtake from the right, you will be penalized with a 3-point deduction and a fine. 1. Correct Overtaking Method: When overtaking, you must first observe the traffic conditions ahead and behind. Only proceed with overtaking when it is safe to do so. If the vehicle ahead suddenly accelerates or there is oncoming traffic, you should abandon the overtaking maneuver. 2. Additional Information: The left lane is the fast lane, while the right lane is the slow lane. Therefore, overtaking from the right may block your view due to the vehicle ahead, posing significant danger. Overtaking on the right not only poses a great threat to your own safety but also to the safety of others. Therefore, it is essential to follow the traffic rule of overtaking from the left when overtaking.
Was this review help?
15
0
Share
More Forum Discussions

Are Electric Motorcycles Classified as Motor Vehicles or Non-Motor Vehicles?

Electric motorcycles are classified as motor vehicles because their speed exceeds 25 km/h, and their weight also surpasses the maximum standard for non-motor vehicles regarding body weight, thus falling under the category of motor vehicles. Definition of Motorcycles: An electric motorcycle is a type of electric vehicle powered by a battery to drive the motor. The electric drive and control system consists of a drive motor, power source, and speed control device for the motor. Other components of an electric motorcycle are essentially the same as those of an internal combustion engine vehicle. Components of Motorcycles: The components of an electric motorcycle include the electric drive and control system, mechanical systems such as drive force transmission, and working devices to accomplish set tasks. The electric drive and control system is the core of the electric vehicle and also the most significant difference from vehicles powered by internal combustion engines.
19
5
Share

What are the items included in a car's first maintenance?

During a car's first maintenance, the tire tread and pressure are checked, small stones on the tires are removed, and a four-wheel alignment check is performed. Below are the specific items included in a car's first maintenance: 1. Inspect and tighten all mechanical connection nuts in the engine compartment and throughout the vehicle; check the tire tread and pressure, remove small stones from the tires, and perform a four-wheel alignment check. 2. Replace the engine oil and oil filter. Based on the condition of the replaced oil, assess whether the engine's machining precision is good. If the oil is not very black, flows well, and is not too thick, it indicates good machining precision. If the drained oil is very black and thick, it suggests significant wear on the mechanical metal surfaces of the engine and transmission during the break-in period. Check whether the power steering fluid level meets the specified requirements and inspect all oil pipe interfaces in the system for leaks. Check whether the car's coolant level is within the specified range.
2
0
Share

Do you need to press the brake when shifting from N to D in an automatic transmission car?

When shifting from N to D in an automatic transmission car, you can either press the brake or not, both methods are acceptable. For automatic transmission vehicles, pressing the brake is required to shift gears for safety reasons. However, when the car is moving, shifting from D to neutral (N) does not require pressing the brake, and similarly, shifting from neutral to D also does not require pressing the brake due to the design structure of the transmission. This shifting method does not harm the engine. The steps to start an automatic transmission car are: 1. After sitting in the driver's seat, press the start button directly; 2. Press the brake and then the start button to ignite and start the engine; 3. Release the foot brake and let the car warm up in place; 4. Press the brake again and shift to D; 5. Release the handbrake and slowly let go of the foot brake to start moving.
19
1
Share

Where is the headlight washer button on the Land Cruiser?

The headlight washer button on the Land Cruiser is located on the panel below the headlight switch on the left side of the steering wheel. This button is used to control the automatic cleaning function of the headlights. On vehicles equipped with headlight washers, the owner can press this button to activate the headlight washer system, which sprays water to clean the vehicle's headlights. The cleaning effect mainly depends on the distance between the nozzle and the lens, the size of the water droplets, the contact angle, the water spray speed, and the amount of water sprayed. The Land Cruiser is a mid-to-large-sized 5-door, 8-seat SUV with dimensions of 5170mm in length, 1975mm in width, and 1930mm in height, and a wheelbase of 2850mm. It is powered by a 4.0L naturally aspirated engine with a maximum power output of 202 kW and a maximum torque of 385 Nm.
17
0
Share

What is the battery model of the Hongguang S3?

Wuling Hongguang S3 battery model is 6-QW-45, with specifications of 12V45AH450A, rated voltage of 12V, and 20-hour power rated capacity of 45AH. Definition of car battery: Car battery, also known as storage battery, is a type of battery that works by converting chemical energy into electrical energy. A storage battery is an electrochemical device that stores chemical energy and releases electrical energy when necessary. Lead-acid battery: Generally, what people refer to as a battery is a lead-acid battery. It is mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte. Some batteries develop high internal resistance after prolonged use, getting fully charged quickly and discharging rapidly. Such batteries may show normal no-load voltage when tested with a multimeter. Therefore, it is not enough to measure only the no-load voltage; the discharge current should also be measured, which can be done using a discharge tester.
20
3
Share

What is the fuel consumption of the Passat with the air conditioning on?

Passat 2.0T fuel consumption with air conditioning on: 8.23L/100km. Driving speed affects fuel consumption: For a new car that has just left the factory, although it has undergone a break-in period, the surfaces of the parts are still relatively rough. During the break-in period, it is essential to control the driving speed and avoid going too fast. The speed should ideally be maintained between 50-80 km/h. Throttle usage affects fuel consumption: For a new car, avoid pressing the throttle too hard to ensure that pistons, cylinders, and other critical components increase their load under moderate conditions. This allows the parts to fully contact, friction, adapt, and set, enhancing the car's ability to adjust to the environment and smoothing out any protrusions on the parts. The quality of the car's break-in period will significantly impact its lifespan, safety, and fuel efficiency.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.