Is overtaking allowed on highways?

1 Answers
AngeloLee
07/30/25 12:30am
Overtaking is permitted on highways, but the following precautions should be observed: 1. Forced overtaking is prohibited: When the preceding vehicle fails to yield speed or lane due to certain reasons, forced overtaking is not allowed; when there is insufficient safe distance ahead of the preceding vehicle, squeezing in or forcing the overtaken vehicle to yield is prohibited. 2. Maintain a smooth overtaking path: Before overtaking, change to the left lane (or overtaking lane) in advance, and delay returning to the right lane after overtaking, keeping the driving trajectory basically parallel to the preceding vehicle. 3. Maintain distance: Always pay attention to keeping a safe distance from the overtaken vehicle before, during, and after overtaking.
Was this review help?
6
4
Share
More Forum Discussions

What is the fuel consumption and performance of the Great Wall 300?

The average fuel consumption of the Great Wall Tank 300 is 8.0~13.0L/100km. Performance introduction of the Great Wall Tank 300: The Great Wall Tank 300 is equipped with a 2.0T-L4 engine, with a maximum power of 167kW and a maximum torque of 387N·m, paired with an 8-speed automatic transmission. Here are other introductions of the Tank 300: 1. Configuration: 6-way electric seat adjustment, seat heating, Bosch 9.3 version ESP, panoramic imaging, L2 level autonomous driving technology, ACC adaptive cruise, and intelligent driving assistance functions. 2. Appearance: A square front face paired with round headlights, along with wheel arches protruding from both sides of the body, giving it a tough SUV style.
6
3
Share

Can a BMW Run-Flat Tire Still Be Driven When Flat?

BMW run-flat tires can continue to be driven after losing air, as their primary function is to serve as a run-flat tire. Below is relevant information about run-flat tires: 1. Function: During vehicle operation, run-flat tires prevent the vehicle from losing control in the event of a sudden tire blowout, effectively reducing the likelihood of accidents. They maintain the vehicle's support capability without significant changes. Many vehicle models are equipped with run-flat tires, and vehicles with run-flat tires typically do not come with a spare tire because it is unnecessary. 2. Precautions: When a vehicle's run-flat tire is low on air, it can still be driven for approximately 250 kilometers at a speed of 80 kilometers per hour. This 250-kilometer range allows the vehicle to reach a repair facility. It is advisable to avoid changing tires on the road. Even when using run-flat tires, it is important to monitor tire pressure and overall tire condition.
10
3
Share

How Often Should Brake Fluid Hoses Be Replaced?

The replacement cycle for brake fluid is every 2 years or 40,000 kilometers. The following situations indicate that the brake fluid needs to be replaced: 1. The brake pedal feels soft: Deteriorated brake fluid can cause the brake pedal to feel spongy when fully depressed. After continuous and frequent braking, the pedal may feel softer and more elastic compared to before. 2. Significantly longer braking distance when braking hard at speeds above 40 KM/H: When driving normally at speeds above 40 KM/H, if the braking distance becomes noticeably longer during hard braking, and after ruling out issues with the brake pads, it can be concluded that the brake fluid is problematic. 3. Unstable braking force: The braking force varies between light and heavy during braking. When the brake fluid deteriorates and its water content exceeds 2.5%, frequent braking generates high temperatures, turning the water in the brake fluid into steam. This creates a large number of bubbles in the brake fluid, leading to unstable braking force.
20
3
Share

What is the fuel consumption of the QJMOTOR Sai 600?

QJMOTOR Sai 600 has a fuel consumption of around 6L per 100 kilometers, with a range of approximately 250 kilometers. Below is a related introduction to the QJMOTOR Sai 600: 1. Power: The powertrain remains the only domestically produced four-cylinder engine, with a displacement of 600cc and a maximum horsepower of 81. The 0-100 km/h acceleration time is measured at 4.11 seconds. The fuel tank capacity is 16.4L. 2. Appearance: The seat height is 800mm, and the curb weight is 215kg. The slightly higher-set handlebars result in a riding triangle that isn't particularly aggressive, leaning more towards a street sport style.
3
3
Share

What to Do If the Car Stalls Immediately After Starting?

Reasons for a car stalling automatically after starting include: 1. Severe carbon buildup in the car engine: When there is severe carbon buildup in the car engine and fuel fails to burn effectively in the cylinders, the car may stall after starting. 2. Triggering the car's anti-theft system: If the car's anti-theft system is triggered, the engine may start but not operate normally, leading to the car stalling automatically after starting. 3. Ignition switch failure: If the car's ignition switch malfunctions, the car may stall automatically after starting, and the vehicle malfunction warning light may illuminate. This situation is more complex and requires inspection and repair by professionals at an auto repair shop or 4S store. 4. Low fuel system pressure in the car: If the fuel system pressure is low, fuel will not burn effectively, necessitating an inspection of the fuel system.
15
2
Share

What's the Difference Between Turbocharged and Naturally Aspirated Engines?

Turbocharged and naturally aspirated engines differ in the following aspects: 1. Power: Naturally aspirated engines provide smoother and slower acceleration, while turbocharged engines offer quicker speed boosts with a noticeable push-back sensation. Installing a turbocharger can increase the engine's maximum power by 40% or more. 2. Fuel consumption: Naturally aspirated engines are more fuel-efficient, whereas turbocharged engines consume significantly more fuel. 3. Technical reliability: Naturally aspirated engines produce less noise and outperform turbocharged engines in terms of smoothness, durability, stability, and safety. 4. Lifespan: Turbocharged engines have a higher failure rate and shorter lifespan. Naturally aspirated engines require less maintenance compared to turbocharged engines, which demand higher upkeep standards. 5. Manufacturing and maintenance costs: Due to their high-temperature and high-pressure working environment, turbochargers require superior materials. Additionally, the inclusion of intercoolers also reflects in the final sales cost.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.