Is New Energy a Type of Car?

How to Detect Car Air Conditioning Faults?

Methods to detect car air conditioning faults: 1. Check the air volume from the air conditioning vents. If the air volume is insufficient, inspect the air filter element and remove any debris if present; 2. Listen for abnormal noises near the compressor. If any are heard, check the compressor's installation; 3. Inspect the condenser's heat dissipation fins for dirt coverage. If dirty, clean them; 4. Check for oil stains at each connection point of the refrigeration cycle system. If oil stains are found, it indicates a leak. Tighten the connection or replace the part; 5. Turn the blower to low, medium, and high settings, listen for any abnormal noises, and check if the blower operates normally. If there are noises or abnormal operation, replace the blower.

15

1

Share

What are the reasons why the trunk cannot be opened?

The reasons why the trunk cannot be opened: 1. Linkage rod or lock cylinder problem. If you often use the key to open the trunk lid, it means the linkage rod is broken and needs to be repaired at a repair shop; 2. If you always use the remote control to open the trunk lid, it means the lock cylinder is dirty or rusty. Spray a rust remover into the lock cylinder a few times to open it; 3. Mechanical part failure or problems with the trunk itself, such as a broken trunk wire or other trunk-related issues causing the car trunk to fail to open; 4. Generally, five-door cars cannot be opened from the inside. For example, some hardcore off-road vehicles do not have a trunk switch to prevent accidental activation during driving, which could cause injuries, so the trunk can only be opened from the outside.

2

3

Share

What transmission does the Peugeot 408 use?

Peugeot 408 uses a Japanese Aisin transmission. The transmission types include a 5-speed manual transmission, 6AT transmission, and 6-speed dual-clutch transmission. The functions of the transmission are: 1. Changing the gear ratio to meet the traction needs under different driving conditions; 2. Enabling reverse driving; 3. Interrupting power transmission to the drive wheels when the engine starts, idles, shifts gears, or needs to stop for power output. Taking the 2020 Peugeot 408 Fun Edition as an example, its body dimensions are: length 4750mm, width 1820mm, height 1488mm, wheelbase 2730mm, fuel tank capacity 53 liters, and trunk capacity 455 liters.

2

4

Share

What is yatone tire?

yatone is a German Yatu tire, a mid-to-high-end tire brand under Continental. Tires are circular elastic rubber products assembled on various vehicles or machinery, mounted on metal rims, capable of supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. The maintenance methods for tires are: 1. Regularly check tire pressure to ensure it is neither too high nor too low; 2. Frequently remove debris from the tread to avoid causing a blowout; 3. Check the wear condition of the tires and replace them in time according to the wear; 4. Perform four-wheel rotation to ensure even force distribution on the vehicle tires and avoid excessive wear; 5. Avoid curbs and potholes, as they can cause the side cords of the tire to break, leading to tire bulges.

14

5

Share

How to Adjust the Headlights of BYD Qin Pro?

The adjustment method for BYD Qin Pro headlights is as follows: 1. Drive the car to a dark area and park it facing a white wall; 2. Open the hood; 3. Start the vehicle, and use a hex wrench or screwdriver to adjust the white screws on the headlights to set the height of the low and high beams. The functions of the headlights are: 1. To accurately illuminate the road ahead; 2. To improve safety during night driving; 3. To avoid affecting the visibility of oncoming drivers. The body dimensions of the BYD Qin Pro are: length 4765mm, width 1837mm, height 1500mm, wheelbase 2718mm, fuel tank capacity 50l, and trunk capacity 500l.

8

3

Share

What Causes Weak Braking When Applying the Brakes?

Possible reasons for weak braking include excessively worn brake pads, insufficient brake fluid, or clogged brake fluid lines. If you experience weak braking while driving, it is important to stop and inspect the vehicle promptly to prevent potential safety hazards. Excessively Worn Brake Pads: Brake pads are the most critical component of a car's braking system. When they become excessively worn, symptoms such as weak braking, longer braking distances, or even brake failure may occur, significantly increasing driving risks. Therefore, when a vehicle has been driven for 60,000 kilometers or the brake pad thickness has worn down to below 6mm, they should be replaced immediately. Insufficient Brake Fluid: If there is insufficient brake fluid, the brake calipers cannot function properly, leading to brake system failure or weak braking. In such cases, it is essential to replace the brake fluid with the manufacturer-recommended fluid to avoid quality issues. Clogged Brake Fluid Lines: When the brake fluid lines are clogged, brake fluid cannot be properly delivered to the brake pump, causing abnormal operation of the braking system. In this situation, the brake fluid lines should be cleaned promptly.

14

5

Share

Is New Energy a Type of Car?

How to Detect Car Air Conditioning Faults?

What are the reasons why the trunk cannot be opened?

What transmission does the Peugeot 408 use?

What is yatone tire?

How to Adjust the Headlights of BYD Qin Pro?

What Causes Weak Braking When Applying the Brakes?

Can I cancel my appointment for the Subject 2 driving test after it has been successfully scheduled?

Can You Drive with a Faulty Wheel Speed Sensor in a Mercedes-Benz?

Can I Change the Antifreeze Myself?

What are the engine specifications of the BMW 320Li?