Is May 2017 compliant with China 5 emission standards?

Does the New Santana Have a Rear Anti-Collision Beam?

The new Santana does not have a rear anti-collision steel beam, only a front anti-collision steel beam. The main function of the anti-collision steel beam is to transmit impact forces. As the first barrier of passive safety in vehicles, the anti-collision steel beam is a U-shaped channel pressed from cold-rolled steel plates and connected to the frame longitudinal beams. It serves as an important safety device to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. The Santana is a compact sedan with body dimensions of 4475mm in length, 1706mm in width, and 1469mm in height, and a wheelbase of 2603mm. In terms of exterior design, the new Santana now follows the standard three-box sedan styling of Volkswagen, with its front face and side curves reflecting a design that can even be described as having a 'Shanghai Volkswagen style.'

14

3

Share

Is One-Key Start a Single Press or a Long Press?

One-key start requires just a single press. Simply press the start button once, and after the ACC light turns on, press the start button again. At this point, the one-key start button will turn green, indicating a self-check status. Once the self-check is complete, press the one-key start button again while stepping on the brake to start the vehicle. The one-key start system can be retrofitted either at the original car key lock position or as an independent panel. Its purpose is to allow the use of the traditional mechanical starting method in case the one-key start function malfunctions. The one-key start intelligent system typically includes features such as automatic lock/unlock, automatic window closing, automatic anti-theft, one-key start/stop, and trunk opening.

18

5

Share

What causes the buzzing sound when stepping on the throttle at low speed in a BMW X2?

The buzzing sound when stepping on the throttle at low speed in a BMW X2 could potentially be from the fuel pump or related components, or it might indicate a faulty clutch release bearing. It's necessary to inspect whether there's any air leakage in the engine's intake pipeline, if the air filter is properly installed, identify the source of the sound, and check if the engine belt is aged, loose, or slipping. The BMW X2 is a two-door model that continues the style of the current X1, positioned as a fashionable crossover. In terms of body dimensions, the BMW X2 measures 4379mm in length, 1824mm in width, and 1555mm in height, with a wheelbase of 2670mm. Exterior-wise, the BMW X2 features two iconic kidney grilles at the front, aligning with the large-size design style of the X3 model. The front face still carries the recognizable BMW family elements, with the front bumper's visible lines complementing the flat and narrow headlights, creating a very distinct layering.

8

5

Share

How to solve the chain noise issue on Suzuki GSX250R?

The chain normally produces certain mechanical noise. Regular cleaning of the chain is recommended, along with applying appropriate lubricating oil. When riding on poor road conditions, maintenance should be more frequent; if individual chain links get stuck, thorough lubrication should be applied to restore flexibility.

6

5

Share

How to Replace the Battery When the Key Fob is Dead?

First, turn the car key sideways and you will see a seam along the side; You can use your fingernail or a flathead screwdriver to pry it open along the seam; After opening, you will see the internal structure of the car key. The round component is the battery—remove it; Insert the newly purchased battery, ensuring the positive side faces upward (the side marked with a '+' should be on top).

3

Share

How to reset the maintenance light on Changan CS55?

With the engine off, press and hold the reset button "A" without releasing it, while simultaneously pressing the brake pedal; Turn the ignition switch to the "NO" position without starting the engine; The dashboard will display a flashing "INSP" message, or the display screen will flash; Continue holding the reset button "A" until the screen shows "..." characters; then turn off the ignition switch to complete the maintenance light reset.

6

5

Share

Is May 2017 compliant with China 5 emission standards?

Does the New Santana Have a Rear Anti-Collision Beam?

Is One-Key Start a Single Press or a Long Press?

What causes the buzzing sound when stepping on the throttle at low speed in a BMW X2?

How to solve the chain noise issue on Suzuki GSX250R?

How to Replace the Battery When the Key Fob is Dead?

How to reset the maintenance light on Changan CS55?

Why is there no air coming from the car heater?

What is the function of a car air conditioning filter?

Why is water dripping from the exhaust pipe of a Luxgen car?

How to Fold a Sunshade into a Circle?