Is making a U-turn in a waterlogged section considered a traffic violation?

Which is More Fuel-Efficient, 1.8T or 1.8L?

1.8T consumes more fuel than 1.8L. Here are the extended details: 1. The 1.8T is a turbocharged engine, while the 1.8L is a naturally aspirated engine. 2. For the same model and displacement, the turbocharged version delivers stronger power but with higher fuel consumption. 3. An engine is a machine that converts other forms of energy into mechanical energy. 4. One of the most common engine parameters is engine displacement, which is the total volume of all the cylinders' working capacity. 5. The cylinder working volume refers to the gas volume swept by the piston from top dead center to bottom dead center, also known as single-cylinder displacement, determined by bore diameter and piston stroke. 6. Engine displacement is a crucial parameter, more indicative of engine size than bore diameter and cylinder count. Many engine performance metrics are closely related to displacement. Generally, a larger displacement results in higher engine output power.

20

4

Share

What to Do When There's a Squeaking Sound While Turning the Steering Wheel?

When turning the steering wheel, there may be buzzing or squeaking noises. Although these sounds are not as loud as other noises, they can still be concerning. Here are possible sources of steering noise: 1. Friction between plastic parts. Since the steering wheel is usually made of plastic components, colder temperatures can cause the plastic to harden, potentially leading to friction sounds. 2. Noise coming from inside the steering wheel. If the noise originates from inside the steering wheel, it is likely caused by the clock spring (airbag spiral cable). To address this, remove the steering wheel and apply some grease to the clock spring. If the noise persists, replace the clock spring as it may be damaged. Be gentle when removing the steering wheel, or disconnect the airbag fuse to prevent accidental airbag deployment. 3. Aging of the tie rod end ball joint. If the tie rod end ball joint is worn out, it can cause the steering wheel to shake and produce noise. In such cases, replace the tie rod end ball joint and perform a wheel alignment afterward. 4. Noise from the stabilizer bar. If the noise is not from the shock absorber, check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving on uneven roads. Loose bushings can be fixed by adding shims, but damaged ones must be replaced. 5. Noise from the shock absorber top mount bearing. Open the hood and listen to see if the noise is coming from the shock absorber top mount. If it is, the noise is likely from the shock absorber top mount bearing. Apply grease to the bearing; if the noise continues, replace the bearing.

9

5

Share

How often should the spark plugs of a Corolla be replaced?

Corolla spark plugs should be replaced every 80,000 kilometers. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe them. The condition of the spark plugs can be judged based on their appearance and color. Normal spark plugs have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burning. If the spark plugs are contaminated with oil or deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, showing signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plugs with new ones. Additionally, if the spark plugs appear black as if smoked, it indicates that the wrong heat range was selected for the spark plugs, the air-fuel mixture is too rich, or there is oil leakage.

11

2

Share

Is it mandatory to have car maintenance at a 4S store?

There is no national regulation requiring maintenance at a 4S store during the warranty period. Here is expanded information: 1. Most car faults can be repaired at normal repair shops. 2. Encourage motor vehicle maintenance enterprises to implement intensive, specialized, and chain operations, promoting reasonable division of labor and coordinated development in the motor vehicle maintenance industry. 3. Encourage the application of environmentally friendly, energy-saving, non-disassembly testing and fault diagnosis technologies in motor vehicle maintenance, advance industry informatization construction and the networking of rescue and maintenance services, improve the overall quality of the motor vehicle maintenance industry, and meet social needs. 4. If quality problems occur with the easily worn parts of household car products during their warranty period, consumers can choose to replace them for free. The types and warranty periods of easily worn parts are specified by the manufacturer on the three-guarantee certificate.

7

5

Share

What are the differences between the Highlander Elite Edition and the Highlander Luxury Edition?

The Highlander Elite Edition and the Highlander Luxury Edition are both vehicles produced by Toyota, belonging to the large SUV segment of the Toyota family. Below are the main differences between the Highlander Elite Edition and the Highlander Luxury Edition: 1. In terms of safety features: The Highlander Luxury Edition adds a tire pressure monitoring system, keyless start system, keyless entry, and active safety features compared to the Elite Edition. 2. In terms of control features: The Highlander Luxury Edition adds a lane departure warning system compared to the Elite Edition. 3. In terms of exterior features: The Highlander Luxury Edition adds a panoramic sunroof compared to the Elite Edition. 4. In terms of interior features: The Highlander Luxury Edition adds a leather steering wheel, cruise control system, adaptive cruise control, front radar, rear parking radar, and a rearview camera compared to the Elite Edition.

2

4

Share

How to Replace Wiper Blades on a Volkswagen?

Replacing the wiper blades on a Volkswagen involves the following steps: 1. Lift the metal wiper arm away from the windshield and maintain it in a stable position perpendicular to the windshield. 2. Press the tab and remove the old wiper blade, separating it from the metal arm. 3. Insert the new wiper blade and gently rotate the new blade. 4. Hook it into place to secure it, then return the wiper to the windshield. Below are daily maintenance tips for wiper blades: 1. When using the wiper to remove dust from the windshield on sunny days, always spray windshield washer fluid; avoid dry wiping. 2. If there are other stubborn or hard contaminants on the glass, clean them manually. 3. When lifting the wiper blades during car washing or routine cleaning, gently return them to their original position. 4. In winter, use an ice scraper to remove ice from the windshield surface before using the wipers to avoid putting extra strain on them.

5

4

Share

Is making a U-turn in a waterlogged section considered a traffic violation?

Which is More Fuel-Efficient, 1.8T or 1.8L?

What to Do When There's a Squeaking Sound While Turning the Steering Wheel?

How often should the spark plugs of a Corolla be replaced?

Is it mandatory to have car maintenance at a 4S store?

What are the differences between the Highlander Elite Edition and the Highlander Luxury Edition?

How to Replace Wiper Blades on a Volkswagen?

What brand is the original tire of the CRV?

Why is the Haval H6 remote not responding?

How to Check Vehicle Emission Standards?

Where is the cabin air filter located in the Ford Escort?