Is Lynk & Co Owned by Geely?

What does 'autoh' mean in BMW cars?

In BMW cars, 'autoh' refers to the automatic handbrake. The method to use the autoh function in BMW cars is: 1. Fasten the seat belt. 2. Press the autoh button after closing the door. 3. At this point, the BMW automatic parking system function can be activated. Additional information: Here is some introduction about the electronic handbrake: 1. The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both of which control parking braking through the friction generated between the brake disc and the brake pads. 2. The electronic handbrake has evolved from the basic parking function to the automatic parking function AUTO-HOLD. The application of the AUTO-HOLD automatic parking function technology allows drivers to not need to brake for a long time when the vehicle stops. When the automatic electronic parking brake is activated, unnecessary sliding of the vehicle can be avoided.

3

1

Share

How to Deal with Car Paint Scratches?

Here are the methods to deal with car paint scratches: 1. Minor scratches. You can use nail polish to repair them. Apply the nail polish continuously from the start to the end of the scratch in one stroke, following the direction of the scratch. 2. Moderate scratches. A touch-up pen is needed for repair. Clean the scratched area before applying primer. Once the primer is dry, smooth it with wet sandpaper, and finally apply the touch-up pen for color. 3. Severe scratches. Take the car to a professional repair shop for repainting. Here are the ways to determine the severity of scratches: 1. Minor scratches. Minor scratches on the vehicle usually do not expose the primer and are not easily visible to the naked eye unless closely examined. 2. Moderate scratches. Moderate scratches on the vehicle typically damage the paint layer but do not affect the steel panel beneath. 3. Severe scratches. Severe scratches on the vehicle usually expose the primer completely and also damage the steel panel.

7

5

Share

How often should the coolant in a Lavida car be replaced?

Lavida car coolant should be replaced every two years or every 40,000 kilometers driven. Here is some information about car coolant: 1. Car coolant circulates in the engine. 2. Its function is to carry away the excess heat generated during engine operation and dissipate it into the atmosphere, allowing the engine to operate at normal working temperature. Extended content: Precautions regarding coolant are: 1. Monitor the coolant frequently. Periodically conduct detailed inspections of the car's radiator to check for water contamination, rust, or sediment. If any abnormalities are found, the car coolant should be replaced promptly. 2. Avoid opening the radiator cap when the temperature is too high. If replacing the coolant, try to avoid doing so when the radiator temperature is excessively high to prevent burns. 3. When topping up the coolant, avoid doing it too quickly; proceed at a steady pace.

13

3

Share

What are the symptoms of a faulty engine ignition coil?

Ignition coil failure manifests with the following symptoms: 1. Engine vibration: Once the ignition coil is damaged, the spark plug's inability to ignite the combustible air-fuel mixture can easily cause engine misfire, resulting in severe vibration. If multiple cylinders misfire or two adjacent working cylinders misfire simultaneously, the engine may fail to start normally. 2. Increased fuel consumption and reduced power: Even if the ignition coil damage doesn't cause engine misfire, the weakened spark plug ignition capability will still affect the combustion of the air-fuel mixture, leading to adverse effects such as increased fuel consumption and reduced power. 3. Excessive carbon buildup: When the spark plug's ignition capability weakens, it also causes incomplete combustion of the air-fuel mixture. This incomplete combustion produces a carbonaceous deposit called carbon buildup, and the vehicle's exhaust may emit black smoke.

7

1

Share

How to Adjust the Time in a Honda Accord?

Here is how to adjust the time in a Honda Accord: 1. Press the one-touch start button to start the car; 2. Press the menu toggle button on the left side of the steering wheel to bring up the time adjustment function; 3. Press the res and set buttons on the right side of the steering wheel to adjust the time display; 4. Press the enter button on the left side of the steering wheel to confirm the time setting. Additional information: Taking the 2021 Honda Accord as an example, its body dimensions are: length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, and fuel tank capacity 56l.

11

0

Share

What Causes a Thermostat to Fail to Open?

A thermostat failing to open is mainly due to: damage to the Wuling Hongguang thermostat. Below is an introduction to some aspects of the thermostat: The working principle of a thermostat is that when the coolant temperature is below the specified value, the refined wax inside the thermostat's temperature-sensitive body remains solid. The thermostat valve, under the action of a spring, closes the passage between the engine and the radiator. The coolant returns to the engine via the water pump, initiating a small internal circulation within the engine. Extended content: Below are the diagnostic methods for thermostat faults: 1. Coolant temperature exceeds 110 degrees: Stop the car, turn off the engine, and open the engine hood. Touch the upper coolant hose in the radiator; it should be very hot. Then touch the lower coolant hose; it should also be very hot. If there is a significant temperature difference between the upper and lower hoses, it confirms a thermostat fault. 2. If the engine takes a very long time to reach normal operating temperature: Stop the car and let the engine temperature drop to match the ambient temperature. Restart the engine and drive until the dashboard temperature reaches around 70 degrees (do not exceed 80 degrees). Stop the car, turn off the engine, and open the hood. Touch the upper and lower coolant hoses in the radiator. If there is no temperature difference, it confirms a thermostat fault. 3. Using an infrared thermometer to test the thermostat: Aim the infrared thermometer at the thermostat housing to measure the temperature changes at the inlet and outlet. This can determine whether the thermostat is opening. When the engine starts, the inlet temperature will rise, indicating the thermostat is closed. When the coolant temperature gauge reaches 70 degrees, test the outlet temperature. If it suddenly increases and the gauge shows above 80 degrees, the thermostat is opening and functioning normally. If there is no temperature change, the thermostat is malfunctioning and needs replacement.

9

3

Share

Is Lynk & Co Owned by Geely?

What does 'autoh' mean in BMW cars?

How to Deal with Car Paint Scratches?

How often should the coolant in a Lavida car be replaced?

What are the symptoms of a faulty engine ignition coil?

How to Adjust the Time in a Honda Accord?

What Causes a Thermostat to Fail to Open?

How to Adjust the Headlight Height of the Mazda Atenza?

What does 'trip' on the dashboard mean?

What does vehicle scan mean?

What does TPMS on the dashboard mean?