Is Lynk & Co a Domestic Brand or a Joint Venture Brand?

1 Answers
VonEmiliano
07/30/25 10:20am
Lynk & Co is a joint venture brand, but the cars produced by Lynk & Co are domestic vehicles. Below is the relevant information: 1. About Lynk & Co: Lynk & Co is a brand jointly established by Geely and Volvo, specializing in the production of high-end luxury vehicles. The lineup includes models such as the 01, 02, 03, and 05. The 03 is a compact sedan, while the other models are all SUVs. 2. About the Lynk & Co 03: The Lynk & Co 03 has a length, width, and height of 4639 mm, 1840 mm, and 1460 mm respectively, with a wheelbase of 2730 mm. The standard version of the 03 comes with two engine options: (1) 1.5-liter turbocharged engine: The 1.5-liter turbocharged engine delivers 180 horsepower and a maximum torque of 265 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1500 to 4000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. (2) 2.0-liter turbocharged engine: The 2.0-liter turbocharged engine produces 190 horsepower and a maximum torque of 300 Nm. This engine achieves its maximum power at 4700 rpm and its maximum torque between 1400 to 4000 rpm. It also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission. 3. Suspension: The Lynk & Co 03 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
20
5
Share
More Forum Discussions

What does 'hold' mean on a vehicle?

Hold on a vehicle refers to the handbrake or parking system. Some vehicles may have an 'autoh' or 'autohold' button, which stands for automatic handbrake or automatic parking, both of which are standard features of the electronic parking brake system. The electronic parking brake system is designed to prevent the vehicle from rolling back during short stops on slopes or in traffic jams. Before each use, the function needs to be activated. Even when in D gear, the driver does not need to keep pressing the brake pedal; releasing it only requires stepping on the accelerator. The system automatically disengages when the driving force exceeds the resistance, so there's no need to shift to neutral. However, for long-term parking, it's best to shift to neutral or P gear and engage the handbrake system.
10
5
Share

How many liters of engine oil does a Cadillac XT5 require?

Cadillac XT5 requires 4 liters of engine oil. Engine oil, also known as motor lubricant, serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing against leaks, rust and corrosion prevention, and shock absorption. It is often referred to as the lifeblood of a car. The oil level should be maintained between the upper and lower marks on the dipstick. Excessive oil can enter the combustion chamber through the gap between the cylinder and piston, leading to carbon buildup. The Cadillac XT5 is a luxury SUV under the Cadillac brand, with body dimensions of 4812mm in length, 1903mm in width, and 1680mm in height, and a wheelbase of 2857mm.
9
0
Share

How to Remove Formaldehyde from Cars?

Steps to remove formaldehyde from cars: 1. Thoroughly clean the car interior; 2. Use an air compressor to evenly spray photocatalyst inside the car; 3. Wait for the solvent to dry, then perform a second spraying to ensure all interior components and corners are covered; 4. After application, open the windows as much as possible to ensure proper ventilation inside the car. To remove formaldehyde from cars, you can also place bamboo charcoal bags or install a car air purifier. The bamboo charcoal in these bags has a porous structure with strong adsorption capacity, which can absorb harmful gases like formaldehyde, benzene, and sulfur dioxide inside the car while releasing natural minerals. Bamboo charcoal bags also have excellent moisture absorption properties, helping to dehumidify, deodorize, and prevent mold in the car.
12
4
Share

What tires are used on the Audi A4L?

Audi A4L uses Dunlop tires, with models 225/50R17 and 245/40R18. The Audi A4L is also equipped with Audi dynamic steering system, which can change the transmission ratio according to driving speed and selected Audi driving mode. It offers flexible operation at low speeds and stable operation at high speeds, working closely with the ESP system. Through the coordination of radar sensors and LED warning lights on the rearview mirrors, it enhances the active safety of the vehicle during driving. The Audi A4L is equipped with a new 8-speed multitronic continuously variable transmission with manual mode, ensuring smoother gear shifts and more efficient power transmission, thereby improving driving comfort and fuel economy.
6
0
Share

What are the steps for replacing coolant?

The steps for replacing coolant are: 1. Unscrew the radiator cap, open the radiator drain valve, and drain the antifreeze; 2. Clean the cooling system: Insert a rubber hose connected to a tap into the radiator filler port, turn on the tap to allow a continuous flow of tap water through the engine cooling system. During the flushing process, keep the engine idling and continue the operation until clear water comes out of the radiator; 3. Turn off the tap, wait until all water in the cooling system is drained, then close the radiator drain valve; 4. Add antifreeze from the radiator filler port until the radiator is full. Unscrew the reservoir cap, add antifreeze up to the Max mark, being careful not to exceed it; 5. Replace and tighten the radiator cap and reservoir cap; 6. Start the engine and let it idle for 2 to 3 minutes, then unscrew the radiator cap. As some air is expelled from the cooling system, the antifreeze level will drop. At this point, add more antifreeze until it reaches the Max mark; 7. Securely replace the radiator cap.
6
2
Share

How to Repair a Dent on the Car?

Methods to repair a dent on the car: Depending on the location of the small dent, choose a suitable round-headed pry bar, then use the round-headed part of the pry bar inside the car body to gently lift the small dent with appropriate force. For areas that cannot be reached, a dent puller can be used for repair, which usually suffices to fix small dents on the car body. If the dent is relatively deep, it can be repaired through metalworking. Specific metalworking methods: First, use specialized metalworking strips to stretch the compressed and deformed frame back to the state required by the original specifications. Then, begin hammering, using various tools to restore the dented part to its original specifications. Next, proceed with welding to repair any fractures or breaks. Finally, perform sanding, using sanding tools to smooth the repaired surface, preparing it for the painting process.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.