···
Log in / Register

Is Longpan 9000 Fully Synthetic Engine Oil Safe to Use?

4 Answers
MartinMarie
07/29/25 3:59am

Longpan 9000 fully synthetic engine oil can be used. Longpan 9000 uses Group III base oil, which in terms of performance is not a high-end product. It is suitable for consumers who do not have high requirements for oil performance and prioritize cost-effectiveness, so there is no problem in using it. Below are the functions of engine oil: 1. Friction Reduction: A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby reducing wear. 2. Sealing: Engine oil can form a seal between the piston rings and pistons, reducing gas leakage and preventing external contaminants from entering. 3. Anti-Rust: Lubricating oil can adhere to the surface of parts, preventing contact with water, air, acidic substances, and harmful gases. 4. Cushioning: When the pressure in the engine cylinder rises sharply, suddenly increasing the load on the pistons, piston skirts, connecting rods, and crankshaft bearings, this load is transmitted and lubricated through the bearings, cushioning the impact load. 5. Cleaning: Good engine oil can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation, washing away dirt generated on the working surfaces of the parts through the flow of the lubricating oil.

Was this review help?
17
5
Share
DeCorbin
08/12/25 3:34pm

I've used LongPan 9000 full synthetic engine oil several times because I usually drive to and from work and need to save some money. This oil is affordable, with a good full synthetic base that offers decent anti-wear and cleaning performance. However, it’s crucial to check whether it clearly states certifications like API SP or ILSAC GF-6A—I always verify these on the packaging before using it, or I wouldn’t dare to. When buying engine oil, stick to official channels like Tmall flagship stores to avoid counterfeit products that could damage the engine. My experience is to regularly check oil pressure and stick to the oil change interval—replacing it every 5,000 kilometers can extend engine life. Most domestic engine oils are reliable, and LongPan is no exception. Feel free to try it, but don’t just go for the cheapest option. Be meticulous with car maintenance—choosing the right oil gives peace of mind.

Was this review help?
9
0
Share
Expand All
JoshuaDella
10/02/25 8:13am

I usually enjoy studying automotive technology. I've checked the specifications of LongPan 9000, and its viscosity meets the 5W-30 standard. Being fully synthetic, it can reduce friction and improve fuel efficiency. Whether you dare to use it depends on certification details, such as checking if the bottle has the ACE C3 certification to ensure compatibility with turbocharged engines. Compared to international brands, it's cheaper but slightly inferior in performance, with the advantage of being affordable and durable. I recommend referring to the vehicle manual to match the viscosity and purchasing genuine products through JD.com's self-operated store. If the engine sounds abnormal, check the oil quality and avoid using no-name brands. Car maintenance is all about evidence; choosing the right oil ensures long-term engine health.

Was this review help?
2
4
Share
Expand All
MatteoAnn
11/16/25 3:08am

When on a tight budget, I often choose LongPan 9000, a fully synthetic oil that's affordable and performs decently. The key is to check for complete certifications—genuine products can properly protect the engine and handle high temperatures. I once bought it through an online channel and used it for three months without major issues; the engine ran smoothly. However, beware of counterfeit products and avoid buying from random street shops. Oil maintenance is simple—just change it on time and don't delay too long. Be bold in using it but choose wisely to ensure both safety and savings, driving with peace of mind.

Was this review help?
10
4
Share
Expand All
More Forum Discussions

What Does the N Gear in a Car Mean?

The N gear in an automatic transmission car stands for Neutral. It is one of the three standard gears in automatic transmission models, located between the R (Reverse) and D (Drive) gears on the gear shift console. Essentially, it represents the neutral position in the transmission, designed to disconnect the power transmission between the input and output shafts inside the gearbox. Automatic transmission cars have a total of 7 gears. Besides the N gear, there are P, R, D, S, L, and M gears: P gear: This is the gear used for long-term parking. It is typically used in conjunction with the N gear. When the P gear is engaged, the transmission is directly locked, which also prevents the car from rolling. R gear: This is the Reverse gear. Both manual and automatic transmission cars use the same symbol for this gear. When reversing, it is generally recommended to engage this gear after the car has come to a complete stop. D gear: This is the most commonly used Drive gear. Gear shifts are controlled via the accelerator pedal. D1, D2, and D3 correspond to the 1st and 2nd, 3rd and 4th, and 5th and 6th gears in a manual transmission, respectively. S gear: This is the Sport gear. Engaging this gear allows the engine to deliver more powerful performance. It is often used for overtaking, as it provides faster acceleration and better fuel efficiency compared to pressing the accelerator hard in D gear. L gear: This is the Low gear. Engaging this gear when going downhill or uphill allows better utilization of the engine's power for braking or fuel efficiency. When descending a slope, it reduces the engine speed, enabling engine braking and reducing the need for constant hard braking. M gear: This is the Manual gear in cars with a manual-automatic transmission. Engaging this gear allows the driver to switch to manual driving mode.
11
1
Share

What is the normal idle speed for Nissan Teana?

The idle speed of the Teana is generally maintained between 750 rpm and 900 rpm under normal conditions. Idle speeds vary among different models: Different models have different idle speeds due to variations in engines. Typically, the idle speed ranges between 500 and 850 rpm. During a cold start, the idle speed can momentarily reach between 1500 and 2000 rpm. Once the engine coolant temperature returns to 90 degrees, the idle speed stabilizes within the specified range. About car idle speed: Car idle speed is not a type of speed but rather a working condition. When the engine runs without load, it is referred to as idling. The engine speed during idling is called the idle speed. The idle speed can be adjusted by modifying the throttle opening, among other methods. Generally, the optimal idle speed is the lowest rpm at which the engine does not vibrate.
8
5
Share

Is the Audi S4 four-wheel drive?

Audi S4 is equipped with a four-wheel drive system, featuring a full-time all-wheel-drive system and utilizing a crown gear differential. Full-time all-wheel-drive system: Cars equipped with a full-time all-wheel-drive system have power distributed to all four wheels at all times. This system enhances the mechanical grip of the wheels, thereby improving the vehicle's acceleration performance and handling. Introduction to Audi S4: The Audi S4 is a high-performance vehicle from Audi's S series. It is powered by a 3.0-liter V6 turbocharged engine, delivering a maximum power of 260 kW and a maximum torque of 500 Nm. The engine reaches its peak power at 5400 to 6400 rpm and its maximum torque at 1370 to 4500 rpm.
13
0
Share

Where is the keyhole of the Haval H6 Sport Edition?

The mechanical keyhole of the Haval H6 can be found on the door handle, and the door can be opened by inserting the key into the keyhole. Car remote key: It is also the car's smart key, which is generally used in the keyless entry system. The smart key consists of a transmitter, remote central lock control module, driving authorization system control module, three receivers, and related wiring harnesses to form a control system. Functions of the car remote key: Through the signals sent by the smart key, the car can enter a locked or unlocked state. It can also close the windows and sunroof. Through the infrared signals emitted by the smart key, the car's central control system starts working to open the car door. When the central processor detects that the key is inside the car, the one-button start function can be used to start the engine. The car smart key uses the world's most advanced radio frequency technology and vehicle identity code recognition system.
16
1
Share

Is the Axela Equipped with a Dual-Clutch Transmission?

The Axela does not use a dual-clutch transmission; it is equipped with a 6-speed automatic transmission (6AT). Engine Power Performance: Since it does not utilize a torque converter, the engine's power can be fully utilized. Additionally, the two sets of clutches work alternately, resulting in extremely short shift times and minimal engine power interruption. Advantages of the Transmission: The dual-clutch transmission combines the benefits of both manual and automatic transmissions. Instead of using a torque converter, it employs two sets of clutches that work alternately to achieve seamless shifting. Due to the more direct shifting and reduced power loss, fuel consumption can be reduced by more than 10%.
4
1
Share

Where is the reversing radar buzzer of the Bora Classic located?

Volkswagen Bora's reversing radar buzzer is located at the rear circle of the car, where the rear circle is the radar of the car. Minimum effective distance: The minimum effective distance of the reversing radar of the Volkswagen Bora is when the vehicle continues to reverse, the frequency of the alarm sound will gradually increase, and finally turn into a continuous sound. At this time, it means that the reversing radar can no longer further distinguish the distance from the rear obstacle, and stopping when the continuous sound just starts, the measured distance from the rear obstacle is the minimum effective distance of the reversing radar. This parameter for the new Bora is 30cm, considering the need to leave a reasonable reaction distance for the driver. Function of the reversing radar buzzer: The alarm issued by the reversing radar is a certain frequency of "beep" sound, and the frequency will become faster and faster as the obstacle approaches. Since the reversing radars of different models are set differently, there is no answer that can be applied to all models, and it can only be slowly explored through time.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.