Is Long-Term Use of Auto Hold Harmful?

2 Answers
VanMackenzie
07/24/25 4:06am
Long-term use of auto hold is not harmful and can be used continuously. Below is an introduction to auto hold: 1. Introduction to Auto Hold: Auto hold, also known as AUTO-HOLD, refers to an automatic braking function. After activating this function, for example, when stopping at a red light, it is equivalent to not needing to pull the handbrake, simplifying operations by avoiding the use of manual or electronic handbrakes. 2. Braking System of Auto Hold: Auto hold relies on an intelligent braking system. The AUTO-HOLD function provides precise parking force through a slope sensor controlled by a controller. During startup, the parking control unit calculates information provided by sensors such as clutch distance, clutch engagement speed, and throttle pedal. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly.
Was this review help?
9
5
Share
MaryLee
08/10/25 11:42pm
Let me share my perspective as an office worker regarding the auto-hold feature. For daily urban commuting, this function is quite convenient - you don't need to keep your foot on the brake at red lights, reducing fatigue. However, frequent long-term activation causes significant battery drain. After several months of heavy usage, my car showed obvious difficulty starting, requiring a new battery that cost several hundred yuan. As batteries age, they can't keep up with charging demands, leading to stalling issues, especially in cold weather when the start-stop system often fails. Frequent engine starts also increase starter motor wear, shortening maintenance intervals. My suggestion: pair auto-hold with economical driving habits - avoid prolonged use in heavy traffic, turn it off overnight to save power, and prevent frequent hard acceleration that triggers it. Regularly check battery health to extend its lifespan, since car repairs not only waste time but also money.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

How to reset the tire pressure indicator light on the Octavia?

Method to reset the Octavia's tire pressure indicator light: First, ensure that all four tires have normal pressure. With the tire pressure at the correct level, turn on the ignition and press and hold the tire pressure monitoring switch until you hear an alarm sound, then release to reset the tire pressure indicator light. The Octavia is a vehicle launched by SAIC Volkswagen, with dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, and a wheelbase of 2686mm. In terms of exterior design, this car adopts Škoda's new family design language, showcasing a minimalist style, and the two-tone floating exterior rearview mirrors add a sense of layering to the body. For the suspension, the front uses a MacPherson independent suspension, while the rear employs a torsion beam non-independent suspension.
17
4
Share

Where is the fuel tank switch of the Excelle located?

Excelle fuel tank switch is located on the left side of the driver's seat. The following is the relevant content: Excelle fuel tank switch: The fuel tank switch of the Excelle is located on the left side of the driver's seat. Pull up the fuel filler door switch to release the handle and open the fuel filler door. The fuel tank switch lock is integrated with the car door lock. When you lock the car doors, the fuel tank cap is also locked. When you unlock the car doors with the key, the fuel tank lock is released, allowing you to directly open the fuel tank cap. Introduction to the Excelle: The Excelle is a compact sedan produced by SAIC-GM Buick. It is equipped with a 1.3T 48V mild hybrid engine and a 1.5L DVVT four-cylinder engine, comprehensively balancing power, fuel consumption, and a good driving experience. The diverse options cater to the needs of different consumers, providing owners with an efficient and agile power experience.
14
3
Share

Why does the Boyue shake when starting cold?

The reasons for the Boyue shaking when starting cold include low temperature, inaccurate air-fuel mixture ratio, severe carbon deposits, and ignition coil failure. Taking the inaccurate air-fuel mixture ratio as an example: it exists in both open-loop and closed-loop control. If the car's computer makes a judgment error, its control over the air-fuel mixture and ignition timing through the actuators will be inaccurate, thereby reducing the car's power output and causing shaking. The Boyue is a model under Geely Auto, with body dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. In terms of appearance, the Boyue's front face design follows Geely's family-style "water ripple" grille. Considering the sense of power of an SUV, the designer reduced the number of grids, making the overall look more concise and the edges more distinct.
8
2
Share

How to Determine if the Timing Chain is Stretched?

It is impossible to determine if the timing chain is stretched by yourself, but a 4S dealership can read the crankshaft sensor and camshaft sensor. If there is an alarm indicating operational delay, it may indicate a potential issue with the timing chain stretching. The timing chain works by connecting the sprockets of components such as the crankshaft and camshaft with a high-strength metal chain, ensuring synchronized operation. Due to the high-speed movement between metal parts, wear is rapid and temperatures are high, necessitating the design of an appropriate lubrication system for cooling and lubrication. Additionally, the use of timing chains in engine design also presents the issue of friction noise between metal parts. To address this, manufacturers must take various measures, such as designing optimized chains.
20
5
Share

How to Detect When the Battery is Fully Charged?

Detecting when the battery is fully charged can be determined by the charging time. Typically, a household car battery has a capacity of around 60Ah, and the required charging current is one-tenth of the battery capacity, which is 6A. Charging at this current usually takes about 3 to 5 hours to fully charge the battery. If a lower current is used for charging, it may take around 10 hours to fully charge. A battery, also known as an accumulator, is a type of cell that works by converting chemical energy into electrical energy. It mainly consists of lead and its oxides as electrodes, with a sulfuric acid solution as the electrolyte. Types include lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries.
2
1
Share

Where to Find the Tire Pressure Markings on Tires?

Tire pressure markings can be found on the sidewall of the tire. These markings typically indicate the maximum load capacity of a single tire and the maximum safe inflation pressure under normal conditions. For example, if the sidewall reads MAX.PRESS.350kPa, it means the maximum safe inflation pressure for the tire under normal conditions is 350kPa. Similarly, MAX.Load615KG indicates the maximum load capacity of a single tire is 615KG. The normal tire pressure range is generally between 2.3 to 2.5 bar, but the standard pressure may vary depending on the vehicle model. Additionally, tire pressure can be influenced by seasonal temperature, driving conditions, and vehicle load.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.