Is Li Auto a Hybrid or Pure Electric?

1 Answers
StAustin
07/29/25 4:56pm
Li Auto's Li ONE is an extended-range electric vehicle. Although this car has an internal combustion engine, the engine does not directly drive the wheels. Instead, it is used to power a generator that charges the battery. Here are some details about the Li ONE: 1. Introduction to Li ONE: The Li ONE is a mid-to-large-sized SUV with a wheelbase of 2935 mm, and its length, width, and height are 5020 mm, 1960 mm, and 1760 mm, respectively. The Li ONE is equipped with a 1.2-liter turbocharged three-cylinder engine that delivers 131 horsepower and reaches its maximum power output at 5500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. Dual-Motor Configuration: The Li ONE is a dual-motor vehicle, with motors on both the front and rear axles. The front motor has a maximum power output of 100 kW and a maximum torque of 240 Nm, while the rear motor delivers a maximum power of 140 kW and a maximum torque of 290 Nm. The Li ONE uses a ternary lithium battery, which is commonly found in most pure electric and plug-in hybrid vehicles.
Was this review help?
15
2
Share
More Forum Discussions

What is the difference between 1.5L and 2.0L displacement?

1.5L and 2.0L displacement differ in the following aspects: A 2.0L engine has a larger exhaust volume than a 1.5L vehicle. The power output of a 2.0L displacement engine is greater than that of a 1.5L displacement engine. Related explanations: 1. Introduction: Displacement (Swept-volume), a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. Generally, a larger displacement means the engine releases more energy (converting chemical energy from fuel into mechanical energy) per unit time, resulting in better "power performance". 2. Extension: The displacement range for compact cars is typically 1.0L-1.6L, while mid-size cars usually have displacements between 1.6L-2.5L. The fuel consumption of a 2.0L displacement engine is generally higher than that of a 1.5L displacement engine.
8
3
Share

Where is the DCU located in Dongfeng Tianlong?

Dongfeng Tianlong's DCU is located next to the urea tank. Meaning of DCU: DCU stands for Diesel Control Unit, which is the core of electronically controlled fuel injection, commonly known as the engine computer. It is a type of traction control unit. DCU control principle: The Dosing-Control-Unit (DCU) monitors vehicle status in real-time through sensors and precisely controls actuators via software calculations to achieve accurate system control. It can be integrated into Bosch EDC17CV electronic control units.
20
1
Share

Is Removing Car Doors a Big Deal?

Removing car doors has significant impacts. Below are relevant introductions about car doors: 1. Function: Car doors provide access for drivers and passengers to enter and exit the vehicle, isolate external disturbances, and to some extent mitigate side impacts to protect occupants. 2. Performance: The aesthetics of a car are also related to the design of its doors. The quality of car doors is mainly reflected in their anti-collision performance, sealing performance, ease of opening and closing, and of course, other functional indicators. Anti-collision performance is particularly important because during a side collision, the buffer distance is very short, making it easy for occupants inside the vehicle to be injured.
9
1
Share

What are the precautions for buying a new car?

1. Inspect the vehicle's paint surface: Visually examine the body paint for scratches and wear. Check for color differences under ample sunlight by opening doors and adjusting angles to observe light reflections from various perspectives to assess panel smoothness. If available, use a paint thickness gauge for verification. 2. Examine bodywork quality: Verify whether connection gaps between components like the hood, doors, fuel cap, taillights, and headlights are even. Uneven gaps may indicate part replacements. Also inspect seals around windows and doors for damage to prevent water leakage during rain. 3. Check the vehicle identification plate: Located on the driver's side door or in the engine compartment, confirm the VIN consistency and check if the manufacturing date is too distant. Generally, if exceeding six months, the vehicle might be inventory stock or a test-drive model.
13
0
Share

Which is the air recirculation mode in AM?

"When the car air conditioning indicator A is lit, it automatically switches between air recirculation and fresh air intake based on the air quality inside and outside the vehicle. When the car air conditioning indicator M is lit, it is in forced air recirculation mode. When either the A or M indicator is on, it is not entirely in fresh air intake mode. Only when neither the A nor M indicator is lit is it in fresh air intake mode. The functions of air recirculation and fresh air intake are different. Air recirculation mode can enhance the cooling effect of the air conditioning. Although the cooling effect is better, prolonged use of air recirculation can reduce the air quality inside the vehicle. The main feature of fresh air intake mode is maintaining the freshness of the air inside the car (specifically in areas with good outside air quality). The purpose of fresh air intake mode is ventilation. When the air inside the car becomes relatively stale, you can switch to fresh air intake mode to replace the air and improve the air quality inside the vehicle. Air recirculation mode helps maintain warmth in winter and keeps the air cool in summer. Prolonged use of air recirculation poses risks, so it is advisable to alternate between air recirculation and fresh air intake. When using air recirculation mode, switch to fresh air intake mode every hour because the high levels of carbon dioxide exhaled by passengers can make the air stale, necessitating fresh air intake to improve air quality. If you want to cool the car quickly after turning on the air conditioning, activating air recirculation mode can shorten the cooling time."
3
3
Share

What is the difference between MOE and RSC tires?

Pirelli tires marked with MOE and RSC have the following two differences: 1. Different applicable vehicle models: MOE is specifically designed as a run-flat tire for Mercedes-Benz vehicles. RSC, on the other hand, is Pirelli's general model designation for run-flat tires. The technical name for run-flat tires is "deflation-resistant tires," with the English abbreviation RSC. Run-flat tires do not lose air immediately; due to their unique tire structure, they can help you continue driving for a certain distance even when the tire is leaking. 2. Different functions: The function of RSC is as a run-flat tire. RSC stands for "Run Flat System Component," and when the tire is ruptured and subjected to extremely high loads, the rubber-based material on its inner wall can keep the tire stable. The function of MOE is more focused on load-bearing; tires with this marking have a high load-bearing index.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.