Is JAC Volkswagen Sehol a Volkswagen?

Which technology is used in autonomous driving?

Autonomous driving itself is a technology, and it is divided into several levels, each with different principles and technologies used. The following is an introduction to the levels of autonomous driving technology: 1. Level 0: No automation. The driver is in full control of all mechanical and physical functions of the vehicle, with only alarms as assistance. 2. Level 1: Driver assistance. The driver operates the vehicle, but individual systems can sometimes intervene, such as Electronic Stability Program (ESP) or Anti-lock Braking System (ABS) to enhance driving safety. 3. Level 2: Partial automation. The driver is primarily in control, but the system can automate certain functions to significantly reduce the operational burden, such as Adaptive Cruise Control (ACC) combined with automatic following and lane departure warning, while the Autonomous Emergency Braking (AEB) system integrates technologies like blind-spot detection and collision avoidance. 4. Level 3: Conditional automation. The driver must be ready to take control at any time. During autonomous driving assistance, such as when following a vehicle, the driver can temporarily be free from operation, but when the vehicle detects a situation requiring driver intervention, it will immediately return control to the driver, who must take over in scenarios the system cannot handle.

8

1

Share

Where is the engine number of Audi A6 located?

The engine number of A6 is located on the lower left side of the engine, near the flywheel position. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine, for a batch of identical products. It is used to represent information such as the manufacturer, specifications, performance, characteristics, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power, among others. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine, for a batch of identical products. It is used to represent information such as the manufacturer, specifications, performance, characteristics, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power, among others. Engines installed in passenger cars or multi-purpose passenger vehicles are marked with the professional manufacturer, model, and production number of the engine as required. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number refers to the production number of the engine, with each engine having only one unique engine number, and each engine's number is different. Composition of the vehicle engine number: Front part: Includes product series code, generation symbol, and regional or corporate code. Manufacturers can choose corresponding letters as needed, but they must be approved and filed by the industry standard standardization unit. Middle part: Consists of the number of cylinders symbol, cylinder arrangement symbol, stroke symbol, and cylinder diameter symbol. Rear part: Composed of structural feature symbols and usage feature symbols. Tail part: Distinguishing symbol. When differentiation is needed for the same series of products due to improvements or other reasons, the manufacturer selects appropriate symbols to represent it, and the rear part and tail part can be separated by a hyphen.

10

4

Share

Are all manual-automatic transmission cars equipped with AT transmissions?

Manual-automatic transmissions are not AT; AT stands for automatic transmission. Below is an introduction to manual-automatic transmissions: 1. A manual-automatic transmission, also known as a manumatic transmission, combines manual and automatic transmission functions. 2. Based on an automatic transmission, it allows users to manually increase or decrease gears. Here is extended information comparing AT transmissions and manual-automatic transmissions: 1. AT is short for Automatic-Transmission. In Chinese, AT transmissions are referred to as hydraulic automatic transmissions. Hydraulic automatic transmissions achieve gear shifting through hydraulic drives and planetary gear sets, typically consisting of components such as a torque converter, planetary gear mechanism, shift actuators, shift control system, and shift operation mechanism. 2. A manual-automatic transmission is a gear-shifting device that integrates manual and automatic transmission functions, enabling drivers to freely adjust gears and engine speed based on their preferences. This technology was developed to enhance the fuel efficiency and drivability of automatic transmissions, allowing drivers to regain control over shift timing, which is usually determined by the computer, thereby improving driving operability and enriching the driving experience. When driving a manual-automatic car in manual mode, the driver simply shifts to manual mode and adjusts gears up or down according to speed changes. If the speed does not match the current gear, the transmission will automatically downshift; if the speed exceeds the current gear, the driver must manually upshift.

5

3

Share

What materials are used for car polishing?

Materials used for car polishing include a polishing machine, polishing pads such as wool pads, rabbit hair pads, sponge pads, etc., polishing compounds, masking film, and paper tape. Generally, after polishing is completed, waxing, glazing, or coating is required. The steps for car polishing are as follows: 1. Wash the entire car. Use a paint cleaner with strong stain-removing power to clean the entire car. When using the cleaner, avoid causing new scratches from dust particles during polishing. 2. Sand with water sandpaper. For defects such as coarse particles, fine sandpaper marks, or flow marks on the paint surface, use 600-1000 grit water sandpaper wrapped around a small rubber block to gently sand the surface until smooth before polishing. Be careful not to sand through the paint layer. 3. Coarse and fine grinding. Use a mechanical grinder with coarse polishing compound to rough grind the marks left by the water sandpaper; then add fine polishing compound for fine grinding. 4. Polishing. Use a mechanical polisher with a mirror-finish treatment agent to remove swirl marks left by the coarse polishing compound, achieving a mirror-like polish on the paint film. 5. Manual waxing. After grinding and polishing, wipe off the polishing compound and immediately use a cotton cloth soaked in polishing wax to wipe the polished areas thoroughly. Then, use a dry cotton cloth to remove any excess wax, leaving the paint surface mirror-like and dazzlingly bright.

12

4

Share

Is there a subsidy for scrapping National IV emission standard vehicles?

There are subsidies for scrapping National IV emission standard vehicles. The subsidy policies vary by region. In the context of increasingly advocating energy conservation and environmental protection, vehicle emission standards are becoming stricter, and car owners can scrap their vehicles in advance according to actual conditions. Private vehicle scrapping regulations: For household 5-seat sedans and 7-seat SUVs, non-operational small and micro vehicles have no usage period limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and micro non-operational passenger vehicles, large non-operational cars, and wheeled special machinery vehicles also have no usage period limit. Common operational vehicle scrapping regulations: Small and micro taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles have a scrapping period of 10 years, and large taxi passenger vehicles have a scrapping period of 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and micro operational passenger vehicles have a scrapping period of 10 years, and large and medium-sized operational passenger vehicles have a scrapping period of 15 years. Micro operational trucks have a scrapping period of 8 years, while light and large operational trucks have a scrapping period of 10 years.

13

3

Share

How long can the red ribbon on a new car be removed?

According to different local customs, the time for tying a red ribbon on a new car varies. Generally, the red ribbon on a new car can be removed after one or two days. In traditional Chinese beliefs, red is a color that represents good luck. Tying a red ribbon on a car symbolizes the family's wish for the owner's safe and prosperous journey. When people buy a new car, they usually tie a red ribbon and set off firecrackers to celebrate. The following points should be noted when purchasing a new car: 1. When buying a new car, always purchase from an authorized 4S store to avoid being scammed by illegal vendors and causing unnecessary trouble. 2. When picking up the new car, check for any wear on the vehicle's exterior, whether the mileage is normal, if all parts of the car are functioning properly, and if the production dates of the tires and windows are close to each other. 3. After picking up the new car, promptly register and license it at the vehicle management office to prevent being stopped by traffic police while driving. 4. Before driving the new car for 3,000 kilometers, avoid aggressive driving to prevent affecting the break-in period. 5. Try to use high-quality fuel when refueling, which helps extend the engine's lifespan. 6. Follow traffic rules while driving, avoiding speeding and overloading. 7. Maintain and service the vehicle on time.

3

4

Share

Is JAC Volkswagen Sehol a Volkswagen?

Which technology is used in autonomous driving?

Where is the engine number of Audi A6 located?

Are all manual-automatic transmission cars equipped with AT transmissions?

What materials are used for car polishing?

Is there a subsidy for scrapping National IV emission standard vehicles?

How long can the red ribbon on a new car be removed?

How Does Carbon Deposit in Vehicles Form?

How to Apply for New Energy Vehicle Quota in Beijing?

Why Do Ignition Coils Fail?

How to Count the Cylinders in a Car Engine?