···
Log in / Register

Is it useful to install sound insulation cotton on the Bora?

5 Answers
LeEverett
07/29/2025, 11:56 AM

Installing sound insulation cotton on the Bora is useful. The function of sound insulation cotton is to protect the paint surface of the engine cover and also to absorb sound. Taking the 2021 Bora as an example, it belongs to the compact car category, with body dimensions of: length 4663mm, width 1815mm, height 1462mm, wheelbase of 2688mm, fuel tank capacity of 50l, and curb weight of 1320kg. The 2021 Bora is equipped with a 1.2t turbocharged engine, with a maximum horsepower of 116ps, maximum power of 85kw, maximum torque of 200nm, and is paired with a 7-speed dual-clutch transmission.

Was this review help?
20
5
Share
Spencer
08/14/2025, 11:57 PM

I've been driving my Bora for several years, and the loud noise often affects my mood while driving. Installing soundproofing foam has made a noticeable difference. Mainly applied to the engine hood and inner layers of the doors, it absorbs engine vibrations and wind noise. The Bora tends to produce a noticeable hum on highways, but after installation, actual measurements showed a noise reduction of about 10-20%. Listening to music while driving is clearer now, and fatigue has decreased significantly. The installation isn't too difficult and can be a DIY project—materials cost around 100-200 yuan, but make sure to apply it firmly without gaps, or the effect will be diminished. Additionally, considering the Bora's cabin design, noise sources mainly come from the tires and engine. Installing soundproofing foam alone can alleviate the main issues, but pairing it with quiet tires offers a more comprehensive solution. Overall, I recommend doing this—small investment, big returns, with visible comfort improvements.

Was this review help?
8
0
Share
Expand All
AutumnDella
10/12/2025, 12:52 AM

I enjoy tinkering with minor car modifications in my spare time, and installing sound insulation foam in the Volkswagen Bora is definitely effective—you'll notice the difference right away. Focus on addressing noise points in the engine bay and wheel arches, using butyl rubber material, which significantly absorbs high-frequency vibrations. The cabin becomes much quieter, especially reducing honking noise during city traffic jams and softening engine roar on highways. The installation is straightforward—I managed to do it myself in just two hours, and the material cost of a few hundred yuan offers great value for money. The key to effectiveness lies in coverage area and material density—avoid making it too thick to prevent affecting heat dissipation. Also, let’s talk about noise sources: the Bora’s factory vibration damping is weak, so adding sound insulation foam helps, but tire noise needs to be addressed separately. For beginners, I recommend starting with this modification—it makes driving more pleasant, relaxed, and comfortable.

Was this review help?
3
4
Share
Expand All
KaiMarie
11/25/2025, 12:54 AM

I commute by car with my kid, but the loud noise from my Bora always made the child fussy. Installing soundproofing foam proved practical and effective. After applying it to the engine area and door panels, the cabin became quiet enough for the kid to sleep peacefully, significantly reducing driving stress. I had a shop help with the quick installation, costing a few hundred bucks—well worth it given the noticeable noise reduction, making navigation prompts easier to hear. Effectiveness varies by model; Bora’s common wind noise was partially mitigated without affecting original performance. Regular maintenance checks prevent new noises, and overall comfort improved markedly, making it ideal for daily use.

Was this review help?
11
4
Share
Expand All
ArcherRose
01/15/2026, 02:26 AM

I'm a frugal pragmatist by nature, and adding sound insulation foam to my Volkswagen Bora was totally worth the DIY effort. With just 200-300 yuan in materials applied to key areas like the firewall and floor panels, road noise dropped significantly for quieter drives. Installation requires care to avoid blocking vents, but it's time-efficient with high returns. On highways, tire noise is noticeably reduced – boosting comfort and lowering fatigue, though it doesn't eliminate all noise types. Long-term, this preventive maintenance saves money by reducing vibration wear on components. A textbook case of small investments yielding major quality-of-life upgrades: the Bora's inherent noise issues were easily mitigated for lasting cabin serenity.

Was this review help?
5
5
Share
Expand All
More Forum Discussions

What is the Difference Between Gasoline Grades?

Taking 92-octane and 95-octane gasoline as examples, the specific differences between gasoline grades are as follows: 1. Applicable compression ratio: Vehicles with a compression ratio between 8.5-9.5 should generally use 92-octane gasoline, while cars with a compression ratio greater than 9.5 should use 95-octane gasoline. 2. Octane rating: 92-octane gasoline has a lower octane rating than 95-octane gasoline. Specifically, 92-octane gasoline contains 92% isooctane, while 95-octane gasoline has an octane rating of 95%. The gasoline grade represents the octane number of the gasoline. For example, 92-octane gasoline consists of approximately 92% isooctane and 8% n-heptane. Since isooctane has better anti-knock properties while n-heptane has poorer anti-knock performance, a higher octane number indicates better anti-knock properties of the gasoline.
6
5
Share

Where is the spark plug located in a Chery car?

The spark plug in a Chery car is generally located at the top of the engine cylinder and can be clearly seen after removing the high-voltage ignition coil. Spark plug replacement process: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the firing order and secure the cover. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
2
1
Share

Will an Automatic Transmission Car Roll Back on a Slope?

Automatic transmission cars are prone to rolling back when encountering steep slopes, while on gentle slopes, the occurrence of rolling depends on the vehicle's performance. Below are detailed introductions to the gears of an automatic transmission car: 1. The R gear is the reverse gear. Engaging this gear connects the hydraulic system's reverse oil circuit, causing the drive wheels to rotate in reverse for backward movement. Do not forcibly shift to the "R" gear when the vehicle is not completely stopped, as this may damage the transmission. 2. The N gear is the neutral gear. When in neutral, the planetary gear system idles and cannot output power. 3. The D gear is the drive gear. When the gearshift lever is in this position, the hydraulic control system automatically connects the corresponding forward gear oil circuit based on throttle opening and vehicle speed signals. It can automatically shift up or down with changes in driving speed, achieving automatic transmission functionality. 4. The P gear is the parking gear. It uses a mechanical device to lock the rotating parts of the car's tires, preventing the vehicle from moving.
17
4
Share

What does cold start mean for a car?

Cold start of a car refers to starting the engine when it has been shut down for a period of time and its internal temperature has reached the ambient temperature. In contrast, there is also hot start of the engine, which means starting the engine shortly after it was last shut down while there is still relatively high residual heat inside. Cold starting an engine is more difficult than hot starting, especially when the ambient temperature is very low and the fuel is diesel. Car ignition starting method: 1. Insert the key: Get in the car and insert the key, turn the key to the second power-on position for ignition, and wait for the system self-check to complete; 2. Start the car's engine: Shift the gear lever from P to N; release the brake and start the car's engine; 3. Start moving: Press the brake pedal with your foot, shift the gear lever from N to D, release the brake and press the accelerator to start moving.
14
0
Share

What Causes Jerking in Mercedes-Benz 7-Speed Transmission?

Transmission jerking can generally be attributed to four main causes: 1. Solenoid valve issues: The solenoid valve contains a small valve core that operates via electrical current, similar to the working valve in the valve body. This can lead to unstable oil pressure regulation and uneven shifting. 2. The vehicle's computer has a self-learning function for driving habits, but this doesn't always result in jerking. This situation is relatively rare, and usually, resetting the learning values can resolve it. 3. Internal valve body obstruction: The valve body has very high requirements for its working environment. Even minor contaminants, including fine powder, can affect the smooth operation of the shift valves inside the valve body. 4. Poor piston return in the transmission can also cause jerking (this is less common and typically an intermittent issue).
10
5
Share

Can a C1 License Holder Ride a Motorcycle?

To operate a motorcycle, the driver must hold a D, E, or F driver's license, so a C1 license does not permit riding a motorcycle. Permitted vehicle types for a C1 license: The C1 license allows the operation of small and mini passenger vehicles, light and mini cargo vehicles, as well as light, small, and mini special-purpose vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer. Vehicles not permitted with a C1 license: large buses, tractor units, city buses, medium buses, large trucks, regular three-wheeled motorcycles, regular two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. What is a C1 license: The C1 license is one of the classifications for motor vehicle driver's licenses. It permits the operation of small and mini passenger vehicles, light and mini cargo vehicles, as well as light, small, and mini special-purpose vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer. Age requirements: The minimum age to apply for a C1 license is 18 years old, with no upper age limit. However, applicants aged 70 or older must pass tests assessing memory, judgment, and reaction abilities.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.