Is It Useful to Install Sealing Strips on Cars?

2 Answers
DelMakayla
07/29/25 7:47am
Installing sealing strips on cars can be somewhat useful, as they help better fill the gaps between vehicle body components, thereby providing benefits such as noise reduction, moisture prevention, and vibration damping. Method for installing sealing strips: Thoroughly clean and dry the areas where the noise-insulating sealing strips are to be installed, as well as the flat surfaces of the strips; select the appropriate attachment positions, locate the starting point for attachment, and then press and attach the strips sequentially from the starting end; after ensuring all strips are correctly positioned, trim the noise-insulating strips appropriately, and then press them down carefully by hand. Points to note when installing sealing strips: Automotive sealing strips are rubber and plastic products, and prolonged exposure to sunlight can easily lead to aging and hardening. Additionally, automotive sealing strips are installed in small gaps, such as between doors and door bottoms, under the hood, in the trunk, and around the B-pillar. Moreover, the addition of sealing strips may cause components like doors and trunks to not close properly, so attention must be paid to the fit when installing automotive sealing strips.
Was this review help?
20
3
Share
KiaraLynn
08/12/25 11:02am
As a car owner, I found installing sealing strips absolutely useful. It significantly reduces wind noise and engine noise inside the car, especially making the sound much quieter when driving on highways, creating a quieter and more comfortable driving experience. On rainy days, there's no water leakage through sunroof or door gaps, keeping the interior seats dry. This thing is made of rubber material, and after installation, it also prevents dust, avoiding dust accumulation that could lead to air pollution inside the car. The installation is not expensive, costing just a few dozen yuan, and you can do it yourself without needing a repair shop. In the long run, it protects the metal parts of the car body from rusting, extending the car's lifespan. Overall, it offers great value for money, and I recommend every car owner to try it. It can make daily driving journeys more relaxed and improve quality of life.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

How to Reset the One-Touch Power Window of Volkswagen Bora?

If the one-touch power window malfunctions, it can be reset by following these steps: 1. Press the window button six times, releasing it briefly after each press. 2. With each press, you will see the window descend slightly. 3. Upon the sixth press, release the button and the window will automatically rise. 4. Then, lift the button upward. 5. The first lift should be held until the window reaches the top before releasing. 6. Perform a second lift and hold the button without releasing. 7. Wait for the window to automatically descend and then release the button to complete the reset. Related information on power window faults and maintenance: 1. If the electric window operates sluggishly, it is often due to depleted lubricant in the door's lift mechanism; remove the inner cover and replenish the lubricant. 2. If the window fails to move entirely, the switch may be faulty and require replacement. 3. If the electronic mechanism is unresponsive, check the relevant fuse for the power window circuit. 4. Deterioration in switch performance or difficulty in opening the window often indicates a faulty switch. 5. Before lubricating internal mechanical parts, remove the inner cover by first taking out the hidden screws and detaching the quick-action switch.
2
3
Share

How to adjust the time on the Honda CRV dashboard?

First, turn off the ignition switch, then rotate the light switch to turn on the small lights. Press and hold the dashboard button for a while, and the hour display on the dashboard will start flashing. Release the button and press it again; each press increases the hour by one. After adjusting the hour, do not touch the button. After flashing five times, it will automatically switch to the minute display flashing. Use the same method to adjust the minutes. Below is some related information about the Honda CRV: 1. The new CR-V features a family-style front grille design. The side profile eliminates the old model's "humpback" shape, adopting cleaner lines. The L-shaped taillights are highly distinctive, and the overall design is more youthful and appealing compared to the previous model. The interior of the new CR-V has become more refined, with a simple and practical dashboard wrapped in soft materials. It is equipped with the same digital instrument cluster and color touchscreen (5-inch for low-end models, 7-inch for high-end models) as the Civic. High-end models support Apple CarPlay and Android Auto. 2. The seats in the new CR-V are quite comfortable, and the floor has no central hump, making it spacious enough for three passengers. In terms of comfort features, it comes standard with a multifunction steering wheel, cruise control, anti-glare rearview mirror, foldable rear seats, rear air vents, Bluetooth calling, LED daytime running lights, and front fog lights. Safety features include standard ESC vehicle stability control, TSC traction control, hill start assist, brake assist, tire pressure monitoring, and auto hold.
20
3
Share

Which One is the Standard Mode for Fista?

Fista's standard mode refers to the intelligent driving mode, also known as Smart mode. The Fista offers four driving modes in total: Comfort, Sport, Eco, and Smart (intelligent driving mode or standard mode). To switch between driving modes, simply press the drive-mode button located next to the gear shift. Below is an introduction to each mode: 1. Eco (Economy Mode): Achieves fuel savings by adjusting shift logic and limiting fuel injection. In simple terms, the vehicle's power output is restrained, meaning even pressing the accelerator hard won't result in rapid acceleration, but rather a gradual increase in speed. 2. Smart (Intelligent Driving Mode or Standard Mode): In standard mode, the vehicle operates under normal conditions, akin to a camera's 'auto mode.' Using standard mode for daily driving strikes a good balance between fuel economy and power performance. In this mode, the suspension is moderately firm, and the throttle response is quite sensitive, offering comfort without sacrificing agility. 3. Sport (Sport Mode): Commonly referred to as 'sport mode,' this setting offers very aggressive power response. Delayed upshifts allow the vehicle to achieve high torque output right from the start. Additionally, the engine maintains high RPMs, keeping the vehicle in a very aggressive state. The acceleration provides an intense push-back sensation, making the vehicle feel like a beast unleashed. However, this comes at the cost of increased fuel consumption and more severe mechanical wear on the engine and transmission. If the engine has been used for a long time, this mode can help clear carbon deposits. 4. Comfort (Comfort Mode): In comfort mode, the suspension becomes softer, the steering is easier to handle, and the body sits lower. Passing over speed bumps or sudden acceleration or braking feels more comfortable than in normal mode. The power delivery is smoother, eliminating any sense of jerkiness.
19
3
Share

How to adjust the headlights of a Polo?

The steps to adjust the headlights of a Polo are as follows: 1. It is best to drive the car to a less crowded place, preferably at night. 2. Prepare a 6mm hex wrench, start by adjusting the low beam, then adjust the high beam distance. 3. When adjusting, slowly turn the wrench, avoiding large adjustments at once to prevent stripping the threads. The detailed steps for adjusting the headlights are as follows: 1. After turning on the high beams, stand in front of the headlights with your feet as close to the headlights as possible, observe the position where the high beams shine on your feet, and note the center of the light (the brightest spot of the beam). 2. Then move vertically to a wall (without deviating), and mark the position of the light center on the wall based on the position on your feet. 3. Use a screwdriver to rotate the headlight's adjustment gear, ensuring the light center aligns with the mark you made on the wall (the vertical distance should not exceed 10 cm). 4. If there is no one else in the car while adjusting the lights, you can slightly raise the light center (generally no more than 5 cm). The reason is simple: an empty car sits higher, and when loaded, the car will settle slightly. Raising the light center slightly allows for some adjustment margin. 5. Adjusting up and down will show obvious movement of the light center, while adjusting left and right may not be as noticeable. It may take several turns to see slight movement, so don’t worry if the light center doesn’t move left or right immediately—keep turning the screwdriver until the light center aligns with the mark. 6. Once both headlights' light centers are aligned with the marks, stand in front of the car (a bit farther away) and observe the beam pattern. At night, with the high beams on, it’s easy to see if the beams are pointing straight forward, as there might have been some deviation when marking the wall.
19
0
Share

What engine does the Honda Haoying have?

Honda Haoying's engine is domestically produced in China, utilizing Honda's technology. It is a turbocharged engine and belongs to the Earth Dreams series. The engine model used in the Honda Haoying is L15BT. The 1.5T engine has a maximum power output of 142kW and a maximum torque of 243Nm. The 2.0L engine has a maximum power output of 146 horsepower, with an additional electric motor providing a maximum power output of 184 horsepower. Here are some maintenance methods for the Honda Haoying's engine in daily use: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD-SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, select CB-CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance will deteriorate, causing various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
16
0
Share

Can Cars Play FLAC Format Files?

Some car models can play FLAC format files, while others cannot. The key factor is whether the installed player in the car supports the FLAC format. If FLAC format playback is not supported, you can convert the files to MP3 or WAV format for playback. FLAC is a well-known free audio compression codec known for its lossless compression. Unlike other lossy compression codecs such as MP3 and AAC, FLAC does not damage any original audio information, thus preserving the audio quality of music CDs. Currently, it is supported by many software and hardware audio products.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.