Is It Urgent When the Tiguan Prompts to Reset Tire Pressure?
2 Answers
When the Volkswagen Tiguan displays a prompt to reset the tire pressure, it means the tire pressure of the vehicle has changed. In such a situation, it is important to safely pull over and inspect all four tires to ensure they are in normal condition. If any tire shows obvious signs of air leakage, promptly visit a repair shop to have the tire inspected and fixed to resolve the issue. There are three common methods for tire pressure monitoring: Direct Tire Pressure Monitoring: Direct tire pressure monitoring systems use pressure sensors installed in each tire to directly measure the air pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure readings for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other tires. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure monitoring systems rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): TPMS combines the advantages of both direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and an indirect system for all four wheels. Compared to a full direct system, this hybrid approach reduces costs and overcomes the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a full direct system.
After driving for so many years, I always feel that the tire pressure storage reminder should never be ignored, especially for cars like the Tiguan. When it prompts to reset the tire pressure, it means the system has detected a change in pressure and needs you to confirm the new value. Abnormal tire pressure is extremely dangerous—too low and the tires wear out quickly, increasing the risk of a blowout; too high and the handling becomes unstable, braking distance lengthens, and the chance of skidding in wet conditions rises significantly. My advice is to pull over and check the actual tire pressure as soon as you see the warning, ensuring each tire is inflated to the manufacturer's recommended value (usually around 32 psi for the front tires and 35 psi for the rear tires), then reset it via the steering wheel or center console. This might seem like a small thing, but it’s crucial for driving safety—you wouldn’t want to regret an accident on the highway. By the way, make it a habit to check tire pressure monthly instead of relying solely on alerts. Preventive maintenance can save you a lot on repair costs.
