Is It Troublesome to Transfer Ownership of a Second-hand Motorcycle Purchased from Another City?

What is the maximum wading depth of the Lavida?

The maximum wading depth of the Volkswagen Lavida is 300mm. The wading depth of the Volkswagen Lavida is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the Volkswagen Lavida is below the water level while wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in the water, which could cause severe damage due to water entering the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed recklessly. Instead, choose an alternative route.

11

5

Share

When Should a Car Be Refueled?

Car should be refueled when the fuel gauge indicates one quarter of fuel remaining. Generally, when the fuel light comes on, it means the fuel level has dropped below the fuel pump, and the fuel in the tank is almost exhausted. When the fuel level is too low, the sediment at the bottom of the tank will be drawn into the fuel supply, which can easily cause fuel line blockage or fuel pump obstruction. Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. Engine oil is used for lubricating internal combustion engines. The main functions of engine oil are to reduce friction and wear of moving parts, and to remove sludge (one of the functions of dispersants) and varnish (cleaners) from the engine.

13

1

Share

What is the installation direction of the air conditioning filter?

The installation direction of the air conditioning filter is to have the side with two clips facing outward and the side with three clips facing inward. The function of the air conditioning filter is to block and absorb various harmful substances in the air, reducing allergic irritation to passengers inside the vehicle. If the air conditioning filter is not replaced regularly, bacteria can easily breed and be discharged into the car interior through the ducts, which is harmful to human health. The replacement cycle of the car air conditioning filter depends on individual driving conditions, external environment, and seasonal climate. Generally, for urban household cars, it should be replaced every 10,000 to 20,000 kilometers or about once a year. If the driving environment is poor with more dust, the air conditioning filter tends to get dirty faster, and the replacement cycle should be appropriately shortened. Additionally, the frequency of air conditioning use varies in different seasons, so the replacement cycle also differs. In summer and autumn, when air conditioning is used less frequently, the replacement cycle can be slightly longer.

18

4

Share

Where is the tire pressure sensor?

The tire pressure sensor is located inside the tire, and depending on the installation position, it can be divided into built-in and external types. The built-in sensor is installed inside the tire, while the external type adds a sensor outside the valve stem. The working principle of indirect tire pressure monitoring is: when the air pressure of a tire decreases, the weight of the vehicle will cause the rolling radius of that wheel to become smaller, resulting in its rotation speed being faster than other wheels. By comparing the speed difference between the tires, the purpose of monitoring tire pressure is achieved. The tire pressure monitoring sensor can accurately measure the temperature and pressure inside the tire. Tire pressure monitoring systems can be divided into two types: one is the indirect tire pressure monitoring system, which determines whether the tire is abnormal by the speed difference of the tires; the other is the direct tire pressure monitoring system, which installs four tire pressure monitoring sensors inside the tires.

6

3

Share

Why Does Car Glass Always Frost Up?

The reason car glass always frosts up: After people leave the car at night, residual heat remains inside the vehicle, causing the temperature of the car glass to be higher than the outside. If the external temperature is too low or it snows, the snowflakes landing on the glass will melt first. As the snowflakes melt, the interior temperature gradually drops to match the outside temperature, causing the melted snow water on the glass to freeze. Methods to clean frost on car glass: 1. When parking after using the car, don't lock the car and leave immediately. Wait patiently for a while, open both doors for ventilation, and when the interior temperature drops to near the outside temperature, turn on the power and use the wipers to clear any remaining snow water from the windshield before leaving. 2. Frost on the rear window is easier to handle, as most cars are equipped with a rear window grid-style defroster. The defroster consumes battery power when in use, so always start the engine first, then press the rear window defogger switch. The defroster will automatically turn off after 10 minutes.

15

0

Share

Is Lingzhi the same as Lexus?

Lingzhi and Lexus refer to the same car model without any essential difference, only representing the brand's naming in different periods. Lexus is the officially registered Chinese name when the brand entered the Chinese market with official backing. Lexus is a luxury car brand under Toyota. Taking the Lexus ES as an example, its body dimensions are 4975mm in length, 1866mm in width, and 1447mm in height, with a wheelbase of 2870mm. The vehicle is equipped with an advanced 2.5-liter DOHC engine and a 3.5-liter DOHC engine, featuring a series of intelligent and forward-looking active safety configurations including the Pre-Collision System (PCS) and Blind Spot Monitor (BSM).

8

0

Share

Is It Troublesome to Transfer Ownership of a Second-hand Motorcycle Purchased from Another City?

What is the maximum wading depth of the Lavida?

When Should a Car Be Refueled?

What is the installation direction of the air conditioning filter?

Where is the tire pressure sensor?

Why Does Car Glass Always Frost Up?

Is Lingzhi the same as Lexus?

How Does Water Get into the Transmission?

What is the speed limit on ramps?

Where is the front side airbag located?

What to Do When the Honda Accord Steering Wheel Locks Up?