Is it suitable to take the Subject 2 driving test on a rainy day?

1 Answers
DelBriella
07/29/25 8:38pm
It is not suitable to take the Subject 2 driving test on a rainy day. Below are relevant details about the Subject 2 test: Subject 2 penalty details: Not wearing a seatbelt deducts 100 points, starting the car without the gear in neutral deducts 100 points, not using the turn signal or using it incorrectly deducts 10 points, stalling the car once deducts 10 points, driving over the edge line deducts 100 points, stopping for more than two seconds during the test deducts 5 points, not following the designated route or sequence deducts 100 points, failing to park the car in the designated spot during reverse parking deducts 100 points, and the car body crossing the line deducts 100 points. Subject 2 test precautions: Before starting, clean the side mirrors and window frames outside the car. Adjust the side mirrors and seat inside the car and secure them. Always remember to fasten the seatbelt. During the reverse parking test, it is best to choose the parking spot at the very back. You can stop and wait before entering the parking spot. Once inside, there will be a broadcast saying "Reverse parking test begins."
Was this review help?
5
2
Share
More Forum Discussions

Is the Audi A3 a three-cylinder or four-cylinder?

Audi A3 is equipped with a four-cylinder engine. Below are the specific details about the Audi A3: 1. Model aspects: Compact sedan. Available in both hatchback and sedan versions, featuring exquisite craftsmanship and excellent handling. The hatchback version has body dimensions of 4312*1785*1426mm, while the sedan version measures 4457*1796*1417mm. 2. Powertrain aspects: Two powertrain options: 1.4-liter turbocharged and 2.0-liter turbocharged. The 1.4-liter version delivers a maximum horsepower of 150 HP, maximum power of 110 kW, and maximum torque of 250 Nm. The 2.0-liter version offers a maximum horsepower of 190 HP, maximum power of 140 kW, and maximum torque of 329 Nm.
5
3
Share

How to adjust the time on Mazda Ruiyi?

Below are the methods to adjust the time on the Mazda Ruiyi: 1. First press SET once, then press the right arrow key. A horizontal line will appear under the time. Hold down CLOOK until the time flashes, then press TRACK/SEEK. The up arrow adjusts the hour, and the down arrow adjusts the minutes. 2. There are two types of time settings for the Mazda Ruiyi: one is set on the navigation/CD player, and the other is set on the steering wheel. If a navigation system is installed, you need to enter the navigation settings to adjust the time. Below is a related introduction to the Mazda Ruiyi: 1. The Ruiyi was developed with the concept of 'Evolution of ZOOM-ZOOM' (ZOOM-ZOOM-Evolution) and aims to be the 'Best-of-CD-Class (the strongest in its class).' It adopts Mazda's independently developed high-end product platform, which is one of the most advanced mid-to-high-end car platforms in the world. 2. The Ruiyi has undergone comprehensive evolution in terms of premium feel, driving convenience, power, safety, fuel economy, quietness, and many other aspects. It is an outstanding work of the Mazda brand, representing the ultimate pursuit of the Mazda brand. Among vehicles in the same class, the Ruiyi offers unparalleled driving convenience, summarized as 'zero difficulty in driving, zero difficulty in parking.' The Ruiyi takes the feelings and emotions of the driver and passengers (appeal-to-driver’s-emotions) as its starting point, with human-centered design being one of its prominent appeals.
15
0
Share

What is the normal water temperature for a BMW 750?

Not only for BMW models, but for any fuel-powered vehicle, the normal water temperature should be 90 degrees. Introduction to the Automotive Water Temperature Sensor: The interior of the automotive water temperature sensor contains the water temperature sensor itself. The lower the temperature, the higher the resistance; conversely, the resistance decreases. It is installed in the water jacket of the engine block or cylinder head, in direct contact with the coolant, thereby measuring the temperature of the engine coolant. Principle of the Automotive Water Temperature Sensor: The electronic control unit measures the temperature of the engine coolant based on this change—the lower the temperature, the higher the resistance, and vice versa. The electronic control unit uses this variation to determine the engine coolant temperature, serving as a correction signal for fuel injection and ignition timing.
7
0
Share

What are the reasons for the delayed shutdown of the new Santana?

The reasons for the delayed shutdown of the new Santana are as follows: Circuit or electronic failure: Very sudden, without any warning. Circuit failures include: blown fuse, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor head, damaged spark plug. Electronic failure mainly refers to the malfunction of the central computer control board. Fuel system failure: Often accompanied by symptoms such as weak engine power and the accelerator pedal feeling like stepping on cotton. Possible locations of fuel system failures include: malfunctioning fuel pump, blocked fuel line, clogged fuel filter, failed carburetor, damaged injector, etc. Sometimes, it may also happen that the fuel tank is empty without the owner's knowledge.
3
4
Share

What is the body length of the new Audi A6L in meters?

The body dimensions of the all-new Audi A6L Zhìyǎ model are 5038*1886*1475 mm in length, width, and height. Audi A6L Management System: Audi's innovative intelligent thermal management system optimally distributes the heat generated by the engine between the engine, transmission, and cabin. The intelligent thermal management system integrated into the engine control unit can adjust in real-time based on engine conditions and environmental variables (such as ambient temperature, air conditioning system settings, etc.). Audi A6L Body Structure: The all-new Audi A6L is closer to Audi's flagship model, the Audi A8, in terms of body lightweighting technology. The all-new Audi A6L adopts a steel-aluminum hybrid body structure, extensively using aluminum sheets, aluminum profiles, aluminum castings, and hot-formed steel, including body panels.
19
5
Share

What is the function of the ABS system?

ABS system functions include: Maximizing the effectiveness of the brakes, reducing braking time and distance; effectively preventing vehicle skidding and fishtailing during emergency braking, ensuring excellent driving stability; allowing steering during emergency braking, providing good steering control; avoiding intense friction between tires and the ground, reducing tire wear. During braking, the ABS system rapidly determines the wheel lock-up state based on speed signals from each wheel speed sensor, closing the normally open input solenoid valve for the wheel that begins to lock up to maintain constant braking force. If the wheel continues to lock up, the normally closed output solenoid valve is opened, causing the braking pressure on that wheel to rapidly decrease due to the direct connection to the brake fluid reservoir, preventing complete wheel lock-up from excessive braking force. This keeps the braking state at the optimal point (slip rate S of 20%), achieving the best braking effect and maximum driving safety.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.