Is it Suitable to Apply Film on Car Sunroofs?

2 Answers
MacCaden
07/24/25 7:34pm
Generally, it is not recommended to apply film on car sunroofs for the following reasons: 1. Sunroof glass usually already has UV protection and heat insulation functions. Applying film again would not only cause a certain degree of resource waste but also affect the overall quality of the vehicle. For example, after applying film to the sunroof, the increased thickness of the glass may, if not installed properly, lead to difficulties in opening and closing the sunroof smoothly. 2. Large panoramic sunroofs have a greater heat absorption area, and the amount of sunlight entering the car is two to three times that of smaller sunroofs, which may necessitate applying film to control the temperature inside the car. However, not all panoramic sunroofs are suitable for film application. If the car's sunroof glass is already tinted, it is advisable to avoid choosing colored film to maintain the vehicle's overall aesthetic appeal.
Was this review help?
11
5
Share
OElias
08/11/25 10:49am
I have owned an SUV for over five years and have considered and tried tinting the sunroof. The main reason is the intense summer sun—applying a film can effectively block heat, reduce UV exposure, make the interior less stuffy, and even save some fuel when using the AC. When choosing a film, opt for high-quality ones, like UV-resistant specialty films, and avoid overly dark tints just to save money, as they might cause glare and compromise safety during night driving. Additionally, if it’s an openable sunroof, confirm material compatibility before tinting to prevent water leakage due to poor sealing. After installation, regularly clean dust and stains to maintain visibility. Overall, it’s suitable for most car owners, especially those living in sunny southern regions—it genuinely enhances daily driving comfort.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What does ECO mean on the Nissan Qashqai?

ECO refers to the car's economical driving mode function. ECO is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the ECO indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active Eco mode does not have a dedicated button. When the dashboard ECO indicator light illuminates, it serves merely as a reminder function. The Eco mode automatically evaluates your driving behavior, and if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most vehicles employ the active Eco driving mode, meaning they have a dedicated switch button. Therefore, during daily driving, we can activate the Eco mode. However, it is unnecessary to enable Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco mode but also impact the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to automatically deactivate. During idle parking or in N/P gear and manual mode, the Eco mode may also become ineffective. When a high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function under these conditions either.
4
4
Share

What are the hidden features of the Luxgen U6?

The hidden features of the Luxgen U6 include: emergency trunk escape, delayed headlight shutdown, and electronic braking providing braking force. The Luxgen U6 is a compact SUV with dimensions of 4628 mm in length, 1825 mm in width, and 1620 mm in height, and a wheelbase of 2720 mm. The front grille of the Luxgen U6 features a hexagonal design with a highly layered interior, decorated with horizontal chrome trim. The Luxgen U6 is equipped with two engines, a 1.6T and a 1.8T, paired with a 6-speed automatic transmission. The 1.6T engine delivers a maximum output of 123 kW and a maximum torque of 245 Nm, while the 1.8T engine produces a maximum output of 132 kW and a maximum torque of 256 Nm.
16
4
Share

What procedures and documents are required for used car transfer?

The procedures and documents required for used car transfer are: 1. Seller's preparation: owner's ID card, vehicle registration certificate, vehicle license, original purchase invoice; 2. Buyer's preparation: ID card, and for non-locals applying for local license plates, a valid temporary residence permit is additionally required; 3. The owner should prepare the original vehicle purchase invoice or the last transfer invoice, the original vehicle license, and the vehicle registration certificate. After both parties sign the used car sales contract, bring all the above documents to the used car transfer hall for processing. Once processed, the transfer is successful. Depending on the identities of the buyer and seller, used car transactions can be categorized into four scenarios: individual-to-individual, unit-to-individual, individual-to-unit, and unit-to-unit transactions. The corresponding required documents are the original and photocopy of the individual's ID card, or the original and photocopy of the unit's organization code certificate, official seal, and the handler's original ID card and photocopy.
6
0
Share

Where are the positions of the accelerator and brake?

The accelerator is on the right, and the brake is on the left. In a manual transmission car, besides the brake and accelerator, there is also a clutch pedal. From left to right, the order is clutch, brake, accelerator. For automatic transmission models, there is no clutch pedal, making operation more convenient, with the order from left to right being brake, accelerator. The car engine's throttle is generally controlled by the accelerator pedal, which is the device for controlling fuel supply in a vehicle engine. When operating the accelerator pedal, the right heel should rest on the floor of the driver's compartment as a pivot point, with the sole gently pressing on the accelerator pedal, using the ankle joint's extension and flexion movements to press down or release. When pressing or releasing the accelerator pedal, the force should be gentle, ensuring a light press and slow lift.
14
3
Share

Where are the positions of the brake and accelerator?

Brake and accelerator positions: The brake and accelerator are on the right side, both controlled by the right foot, while the clutch is on the left, controlled by the left foot. Drivers must clearly distinguish between the positions of the brake and accelerator to avoid stepping on the wrong pedal in emergencies, which could lead to traffic accidents. When driving, the placement of the right foot responsible for the accelerator and brake is also important—place the foot near the brake side, press the brake straight with the foot, and tilt the toe to press the accelerator. This can shorten the time to step on the brake in case of sudden situations and reduce the likelihood of panic, preventing accidental pressing of the accelerator. Always stay focused while driving, avoid using mobile phones, and constantly watch for vehicles or pedestrians at intersections. Slow down early when detecting potential hazards by releasing the accelerator and gently applying the brake.
2
5
Share

Where are the brake and accelerator pedals located?

The positions of the brake and accelerator pedals are as follows: manual transmission vehicles have three pedals, arranged from left to right as the clutch pedal, brake pedal, and accelerator pedal; automatic transmission vehicles have two pedals, arranged from left to right as the brake pedal and accelerator pedal. The brake, also known as the decelerator, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transportation tools, or machinery. The brake device is a mechanical braking device that can slow down the vehicle, also known as a decelerator. The accelerator, also referred to as the "throttle" or "gas pedal," is the control device that regulates the engine's power (thrust). The accelerator controls the throttle opening of the carburetor to regulate the filling amount of the cylinder, thereby determining the engine's output power.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.