Is it serious if the car window is left open on a rainy day?

What Does the Subject 1 Exam Cover?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulates the content of the Subject 1 exam: road traffic safety laws, regulations, and rules; traffic signals and their meanings; safe driving and civilized driving knowledge; safe driving knowledge under conditions such as highways, mountainous roads, bridges, tunnels, nighttime, adverse weather, and complex road conditions; emergency handling knowledge for situations like tire blowouts, steering failure, and brake failure; basic knowledge of the general structure of motor vehicles, main safety devices, and routine inspection and maintenance; basic knowledge of self-rescue and first aid after traffic accidents, as well as common hazardous materials. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 exam consists of 100 questions, divided into single-choice and true/false questions, each worth 1 point, totaling 100 points. If a candidate answers 11 questions incorrectly during the exam, the system will automatically submit the test and end the exam. Subject 1, also known as the theoretical exam or driver theory test, is part of the motor vehicle driving license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is computer-based and has a time limit of 45 minutes. Subject 1 Exam Notes: Candidates should pay attention to their attire during the exam—no slippers are allowed, and electronic devices and bags are prohibited in the exam hall. Bring your ID card and queue up to enter the waiting area. Observe the instructions and procedures on the large screen, and store personal belongings in a locker before entering the exam hall. Upon entering, verify your identity at the assigned seat and begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue up to collect your score report and sign it—unsigned reports are considered invalid. There is no limit to the number of times you can reschedule the Subject 1 exam. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retake or fail the retake, the exam process ends, and you must reschedule. In contrast, Subject 2 and Subject 3 have only five exam attempts each. Subject 2 and Subject 3 exams must be scheduled at least ten days apart. If you fail the Subject 3 safe and civilized driving knowledge test, your previously passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge exam; Subject 2 refers to the field driving skills exam; Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge.

20

3

Share

How to Deal with Engine Emission Failure?

Engine emission system failure should be promptly inspected and repaired at a maintenance facility. The causes of engine emission system failure are as follows: 1. Check the spark plugs and cylinder wires. 2. Perform a fuel pressure system inspection. 3. Inspect the injectors of each cylinder. 4. Check the fuel pump and fuel pump circuit. 5. Additionally, inspect the cylinder pressure, intake and exhaust valve clearance, fuel vapor control solenoid valve, EGR valve cylinder operation, and whether the intake manifold is leaking. Below are the reasons why the engine exhaust system warning light may illuminate: 1. Poor quality gasoline, which may lead to abnormal mixture ratios, electronic device failures, and exhaust system abnormalities. 2. Faulty electronic components in the intake system, such as oxygen sensors, carbon canister solenoid valves, throttle bodies, and engine carbon buildup. 3. The engine control program may require updates or debugging. 4. Once the engine warning light comes on, it indicates changes in engine parameters. If not addressed promptly, the engine combustion state will remain unadjusted to normal conditions.

13

0

Share

Will early signaling result in point deduction in Subject 3?

Early signaling in Subject 3 will result in point deduction. The methods for using turn signals are as follows: 1. Left turn signal: used for turning left, changing lanes to the left, starting off, leaving parking spots, and making U-turns. 2. Right turn signal: used for turning right, changing lanes to the right, and pulling over to park. 3. During night driving, use low beams; when visibility is poor, high beams may be used. When overtaking at night, alternate between high and low beams. Use parking lights and tail lights when temporarily parked, and use fog lights and hazard lights in foggy conditions. The usage of turn signals in the Subject 3 test is as follows: 1. Starting off, turning, changing lanes, overtaking, or parking without signaling for at least 3 seconds will result in a 100-point deduction and failure. 2. Failing to use or incorrectly using turn signals before starting off, turning, changing lanes, overtaking, or parking will result in a 100-point deduction and failure. 3. Failing to activate the left turn signal before making a U-turn will result in a 100-point deduction and failure.

6

4

Share

What are the effects of a damaged ambient temperature sensor?

Different automotive temperature sensors can cause various impacts when damaged. The following sections explain: 1. Intake Air Temperature Sensor: If the intake air temperature sensor malfunctions or is damaged, the engine will not be able to accurately calculate the fuel injection amount, resulting in either too rich or too lean air-fuel mixtures. This can lead to difficulties in starting, unstable idling, shaking, or black smoke emissions, affecting the engine's performance. 2. Coolant Temperature Sensor: If the coolant temperature sensor malfunctions or is damaged, the engine will not be able to regulate the water temperature promptly, leading to insufficient cooling. This may cause overheating, cylinder scuffing, difficulties in starting when cold, unstable idling, shaking, poor acceleration, and when the engine is hot, the engine warning light may stay on, and the cooling fan may stop working.

10

5

Share

What are the signs of aging in a car's control arm bushings?

The manifestations of aging in a car's control arm bushings are as follows: decreased handling and comfort, reduced safety performance, abnormal noises, inaccurate alignment parameters, vehicle deviation, and wear or damage to other components (such as tire wear), affecting steering and even leading to malfunctioning performance. The precautions for using car control arms are as follows: 1. Shock absorption: The function of the control arm is to absorb vibrations during driving, with shock absorbers used in conjunction to provide cushioning. 2. Materials: Control arm materials are quite diverse, including aluminum alloy, cast iron, double-layer stamped parts, and single-layer stamped parts, each with its own advantages and disadvantages. Stamped parts have good toughness but insufficient strength, making them prone to fracture upon impact. 3. Rust prevention: It is generally easy to check for rust on the lower control arm, as it is located at the connection point between the front wheel tire and the car's central body. If rust is detected, it must be addressed promptly at a 4S shop to prevent unexpected breakage.

3

Share

At What RPM Should You Shift Gears in a Car?

For most common vehicles, it's appropriate to shift gears between 2000-3000 RPM. However, shifting from first to second gear usually occurs at a slightly lower range, around 2000 RPM or just above. Some vehicles are equipped with low-RPM engines that can deliver significant torque and power at lower revolutions. For such engines, shifting around 2000 RPM or even between 1500-1800 RPM is acceptable. Here are some considerations for downshifting: 1. Generally, when decelerating and needing to accelerate again, you should select the appropriate gear based on your current speed. 2. Use 4th gear when speed drops to 40-50 km/h. 3. Use 3rd gear when speed drops to 30-40 km/h. 4. Use 2nd gear when speed drops to 10-30 km/h. 5. Use 1st gear when speed drops to 0-10 km/h.

13

0

Share

Is it serious if the car window is left open on a rainy day?

What Does the Subject 1 Exam Cover?

How to Deal with Engine Emission Failure?

Will early signaling result in point deduction in Subject 3?

What are the effects of a damaged ambient temperature sensor?

What are the signs of aging in a car's control arm bushings?

At What RPM Should You Shift Gears in a Car?

Hill Start Assist System Function?

Where is the Reverse Gear Located?

How to Deal with Unstable Steering Wheel in Subject 3?

What does TSS2.0 mean?