Is it serious if the black primer is exposed after a white car is scratched?

2 Answers
Beatrice
07/24/25 3:55pm
It is relatively serious if the black primer is exposed after a white car is scratched, as it reveals the vehicle's most original primer. Such an issue should be repaired as soon as possible; otherwise, the scratched area where the primer is exposed is prone to rust, which can gradually expand over time and significantly affect the car's appearance. Methods to deal with exposed black primer on a white car: Apply ordinary toothpaste in a circular motion on the scratched area. Reapply after rain or car washing to reduce the visibility of the scratch and provide a simple barrier to prevent rust in the short term. However, applying toothpaste is only a temporary solution. It is still necessary to use a touch-up pen or visit a professional repair shop to repaint the damaged area of the car body.
Was this review help?
19
2
Share
JuliannaAnn
08/11/25 8:54am
Seeing your white car with black primer exposed from the scrape, I think you shouldn’t panic too much, but also shouldn’t ignore it. Purely from a safety perspective, the car hasn’t been deformed by the impact, so driving it is still safe—no need to worry about affecting the brakes or handling. However, aesthetically, it’s really unsightly; those black dots stand out starkly against the white paint. Friends might ask about it when they see it, and driving around with it would feel frustrating. If only the primer is exposed and the metal panel underneath isn’t damaged, the risk of corrosion is lower, but in cities with lots of dust and frequent rain, rust could develop over time, making repairs more troublesome later. I suggest taking it to a repair shop as soon as possible. A small scratch touch-up won’t cost much—just a couple hundred bucks to fix. I’ve dealt with a similar situation myself, and handling it early saves hassle while keeping your car looking sharp, since paint protection is part of routine maintenance. Just remember to choose a professional shop—don’t cut corners to save money and risk future issues.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the Baojun 610?

The fuel tank capacity of the Baojun 610 is 54 liters. In the same class, the Baojun 310W 2020 1.5L Automatic Jinxiang Type VI has a fuel tank capacity of 40 liters. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for oil leaks at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, also check if the ventilation holes are clear. The filter screen at the fuel filler inlet should remain intact to prevent impurities from entering the fuel tank and clogging the fuel lines during refueling. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling out while driving. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is near E, it indicates that the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient.
7
4
Share

Are Jetour and Chery engines the same?

Jetour and Chery engines are the same, both belonging to Chery. Introduction to Chery engines: Chery engines are of good quality, incorporating a large number of contemporary advanced technologies. The level of technological integration is internationally leading, with key technical indicators such as power, fuel consumption, and emissions reaching world-class standards. Engines have always been a focal point of Chery's development. Since its inception, Chery has collaborated with Austria's AVL to develop engines. Chery engines are mainly concentrated in the 1.0 to 2.0L range, where they are particularly strong among domestic brands. Brand advantages: As a domestic brand, Chery offers high cost performance, practicality, and affordability. It features elegant exterior design, refined interiors, powerful engine performance, fuel efficiency, high configuration levels, and excellent cost performance.
8
1
Share

What Causes the Jerking in Haval H6?

Haval H6 experiences jerking during acceleration, which is likely caused by poor fuel system maintenance. Below are the relevant details: Common Causes: Poor fuel system maintenance; excessive carbon buildup in the throttle body, fuel injectors, or intake manifold; substandard fuel quality leading to incomplete combustion; faulty spark plugs or ignition coils causing cylinder misfires, etc. Solutions: If there is jerking during acceleration, it indicates a serious issue with the vehicle's throttle pedal. At this point, the owner needs to replace or repair the throttle pedal. If the problem persists after replacing the throttle pedal, the owner should replace the vehicle's spark plugs and fuel injectors.
5
4
Share

What does the triangle with an exclamation mark mean in a BMW?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's regular performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark inside indicates an automatic transmission fault warning light, signaling a transmission malfunction or transmission fluid below the normal range. The transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, indicating either a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light. This light turns on when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair. Alternatively, you can perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
18
5
Share

Where is the engine number of Haval H7?

Haval H7's engine number is located on the cylinder block. It is generally a combination of 7 to 8 digits and English letters. In addition to the above method, the engine number can also be viewed in the following 4 ways: The vehicle's driving license has the engine number printed on it, usually located on the second last line; The motor vehicle registration certificate will indicate the engine number; The purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and the engine model can be the same. The engine number refers to the production number of the engine, and each engine can only use one engine number, and the number of each engine is different.
17
1
Share

Where is the transmission oil filler port located on the BMW E90?

The transmission oil filler port on the BMW E90 is located at the bolt on the left side near the rear of the transmission, while the drain port is at the bolt on the oil pan. Precautions for changing transmission oil: The oil level can only be checked when the engine is off, the vehicle is parked on level ground, and the transmission must be cold. Remove the filler plug to check the oil level; the transmission oil should be at the bottom of the filler hole. If the oil level is low, add transmission oil until it starts to overflow from the filler hole, then reinstall the plug. Replacement interval: Under normal circumstances, the transmission oil should be replaced every 40,000 kilometers or once a year as part of regular maintenance. During the first maintenance, if you are not careful, the 4S dealership may not proactively replace it.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.