···
Log in / Register

Is It Serious If a Tire Runs Over Glass Shards?

4 Answers
StJayla
08/30/25 2:48am

If the glass shards the tire runs over are not very sharp, the tire is generally fine. What is the standard tire pressure: According to the regulations and requirements of the international GBT2978-2008 standard, the tire pressure for different tires is as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Other related questions: Is a tire pressure of 2.0bar normal? No. According to the regulations and requirements of the international GBT2978-2008 standard, the standard tire pressure for standard tires is 2.4-2.5bar. 2.0bar is below the minimum value of the standard tire pressure, so it is not normal. What is the normal tire pressure in winter? In winter, the tire pressure should be based on the standard tire pressure of the car tire, with an appropriate increase of about 0.2bar. What is the normal tire pressure in summer? Generally, the lower limit of the standard tire pressure for car tires is sufficient. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures.

Was this review help?
2
1
Share
SanKeegan
09/11/25 6:56am

I've been driving for most of my life. Once, I ran over some glass shards on the roadside and heard a hissing sound right after starting. The tire slowly deflated, and I ended up stranded on the highway, nearly causing an accident. Glass shards are incredibly hard, like little knives that can slice through the rubber layer of a tire. Once they penetrate, they can cause a blowout or slow leak, especially at high speeds, where the risk of a blowout is extremely high and can easily lead to rear-end collisions or rollovers. So, running over glass shards is absolutely serious—you must slow down immediately, pull over, and check. If you find a shard embedded, don't yank it out, as this can speed up the leak. It's better to use an air pump to temporarily inflate the tire and then drive slowly to a repair shop. For daily driving, it's advisable to pay extra attention to the road surface and glance at your tires after rough roads to develop good habits that can prevent such dangers. Regular maintenance is also crucial, like checking tire pressure and wear. Low-pressure tires are more prone to punctures. Safety is no small matter—never take it lightly.

Was this review help?
9
1
Share
Expand All
OLily
10/25/25 7:48am

As someone who frequently works on cars, I must emphasize that running over glass shards is absolutely not to be ignored. The sharp edges of glass can easily penetrate the rubber layer of the tire, causing inner tube damage or even a direct blowout. When inspecting, first visually check the surface for any bulges or embedded objects. If there are no obvious issues but you suspect a leak, it might be due to small cracks starting to form. It's advisable to measure the tire pressure promptly. If the tire is flat, avoid driving forcefully; instead, move slowly to a safe location for handling. The repair method depends on the severity: small holes can be fixed with tire plugs, while large holes require a new tire—this is crucial for driving safety. Preventive measures include regularly cleaning debris from tire treads and maintaining proper tire pressure. In summer, high temperatures increase the presence of glass shards on roads, so always inspect before long trips—don't skip this small but important step.

Was this review help?
12
0
Share
Expand All
Donald
12/08/25 8:12am

Driving over glass shards is extremely dangerous, and it's one of my biggest fears while driving. Unlike harmless gravel, glass can instantly puncture tires, leading to frequent high-speed blowouts. At best, it ruins the tire; at worst, it can cause rollovers and fatalities. If you encounter this situation on a highway or slippery road, immediately turn on your hazard lights and pull over safely. Avoid slamming on the brakes—prioritize the safety of yourself and your passengers. After stopping, inspect the tires: feel for any embedded shards with your hands. If there are no obvious issues, drive slowly for a short distance while monitoring the tire pressure gauge. Remember, continuing to drive on a damaged tire only increases the risk—seek professional repair as soon as possible. Developing good habits, like scanning the ground for debris before setting off, can significantly reduce the chances of such incidents.

Was this review help?
2
3
Share
Expand All
More Forum Discussions

What does Corolla G mean?

GL-marked Corolla models are entry-level variants. Since G models are rare in the domestic market, many dealers directly interpret GL as the base model and GLS as the luxury version. Here's relevant information: 1. Essentially, these just indicate different trim levels of the Corolla. GL represents basic configuration, GL-i denotes mid-range configuration, while GL-XI signifies top-tier configuration. However, these badges bear no significant relation to the vehicle's powertrain or intrinsic performance. 2. In fact, many early Japanese models used this classification method, but currently only Toyota maintains this "practice". This classification model reflects Toyota's brand spirit of adhering to traditional systems.
15
0
Share

How to cancel the maintenance reminder on a Great Wall C30?

Turn on the ignition without starting the engine. Press the reset button once to display the next system that needs to be reset. Here is some relevant information: 1. Powertrain: This compact sedan equipped with a 1.5L VVT engine was positioned as Great Wall's important strategic model. The 1.5L VVT engine is paired with either MT or CVT transmission options. The all-aluminum VVT engine features lighter weight and enhanced stability, achieving variable valve timing to increase air intake, effectively improving power output while reducing fuel consumption. 2. Exterior design: The C30's appearance is rather conventional without particularly memorable features. Or perhaps not as striking as Haval models. From the side profile, the C30 bears some resemblance to the new Vios.
8
2
Share

How to Confirm a Successful Subject 1 Exam Appointment?

Generally, you will receive an SMS notification from the vehicle management office two days before your scheduled exam date. Receiving this notification indicates a successful appointment. Below are relevant details: 1. Subject 1: Also known as the Subject 1 theory test or driver's theory exam, it constitutes part of the motor vehicle driver's license assessment. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the exam covers theoretical driving knowledge, road safety laws and regulations, local regulations, and related information. The test is computer-based, consisting of 100 questions, with a passing score of 90 or above. 2. Important Notes: It's crucial to note that once an appointment is made, you cannot view scheduling information for other exam sessions unless you cancel the current appointment. Additionally, each subject exam can only be canceled up to three times.
13
2
Share

Can the Subject 1 Exam Be Taken on Weekends?

Subject 1 can be taken on weekends as long as you can schedule an appointment. Subject 1, also known as the Subject 1 theory exam or driver's theory exam, is part of the motor vehicle driver's license assessment. Below is an introduction to relevant knowledge about obtaining a driver's license: 1. Definition: The driver's exam (motor vehicle driver's exam) is a qualification test organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's exam can one obtain a driver's license and legally operate a motor vehicle. 2. Exam Content: The motor vehicle driver's exam consists of the following parts: the road traffic safety laws, regulations, and related knowledge exam (also known as the "theory exam", hereinafter referred to as "Subject 1"), the field driving skills exam (commonly known as the "yard exam", hereinafter referred to as "Subject 2"), and the road driving skills and safe, civilized driving knowledge exam (commonly known as the "road exam", hereinafter referred to as "Subject 3"). The exam content and passing standards are uniform nationwide, with corresponding exam items specified according to different types of vehicles eligible for driving.
12
3
Share

Where are Comforser tires produced?

Comforser tires are a Chinese tire brand, manufactured in Shandong Province. Here are the relevant details: 1. Comforser Tires: Comforser offers multiple tire series, including economy passenger car tires, high-performance car tires, SUV tires, commercial light truck tires, and winter tires. Taking their popular SUV tire model CF1100 as an example, it features raised white lettering on the sidewall for an aesthetic and stylish appearance; the 3D block tread pattern design effectively protects the tire from damage in harsh road conditions, extending its service life. 2. Design: Comforser tires are developed with the concepts of 'differentiation' and 'world-class quality,' utilizing asymmetric and unidirectional tread patterns; they also incorporate a wider tread surface and more comfortable sidewall designs. These features make the tires more wear-resistant and enhance their overall performance. Comforser is one of the brands under Shandong New Continent Rubber Technology Co., Ltd., a wholly-owned subsidiary of Shandong Yinbao Tire Group, established in 2012.
16
0
Share

How to align the crankshaft belt on a Ford Focus?

Ford Focus crankshaft pulley alignment method is to align the timing mark on the crankshaft pulley with the mark on the timing chain. Below is relevant information: 1. The lower part of the cylinder block where the crankshaft is installed is called the crankcase, which is divided into upper crankcase and lower crankcase. The upper crankcase is cast integrally with the cylinder block, while the lower crankcase is used to store lubricating oil and seal the upper crankcase, hence also called oil pan. 2. Functions of the crankcase are as follows: The crankcase is the most important component in the engine. It bears the force transmitted from the connecting rod and converts it into torque output through the crankshaft to drive other engine accessories; The crankcase is subjected to combined forces including centrifugal force from rotating masses, periodically varying gas inertial forces and reciprocating inertial forces, causing the crankshaft to bear bending and torsional loads.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.