Is it seat cushion or sitting cushion in a car?

What is the correct parking procedure for an automatic transmission vehicle?

Automatic transmission vehicle correct parking procedure is: 1. First press the brake, then pull up the handbrake; 2. Shift the gear to P position; 3. Slowly release the foot brake and then turn off the engine. Automatic transmission usually refers to the automatic gear shifting mechanism of a car. When driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine speed and load, replacing the driver's subjective judgment of timing and gear shifting operation. Automatic transmission is different from manual transmission. The former connects and transmits power through a soft connection, which is the torque converter. Automatic transmission does not have the clutch plate of manual transmission, so special attention is needed during operation. Otherwise, over time, it may cause problems such as overheating of the transmission temperature and insufficient power connection due to certain wear and tear.

12

0

Share

Where is the radar switch on the Spirior?

The radar switch of the Spirior is located below the central air conditioning vent, which is the P button. Press it once to turn on (indicated by the light), and press again to turn it off. The car radar can take over some tasks that require attention, judgment, and technical skills, thereby reducing driving intensity and alleviating the driver's burden. The exterior dimensions of the Spirior model are 4730mm in length, 1840mm in width, and 1450mm in height, with a wheelbase of 2705mm. In terms of power, the vehicle is equipped with a 2.4L iVTEC engine, delivering a maximum torque of 233 Nm and a maximum power of 148 kW. It is paired with a 5-speed automatic transmission.

12

1

Share

What are the main components of the crankshaft flywheel assembly?

The crankshaft flywheel assembly mainly consists of the crankshaft, flywheel, and other parts and accessories with different functions. The types and quantities of these parts and accessories depend on the engine's structure and performance requirements. The role of the crankshaft flywheel assembly is to convert the reciprocating motion of the pistons into the rotational motion of the crankshaft, providing torque for the vehicle's movement and other power-demanding mechanisms. It also stores energy to overcome resistance during non-power strokes, ensuring smooth engine operation. The crankshaft is a crucial component within the engine, serving as the power output shaft. It connects to the connecting rods, which are present in the car's engine. The small end of the connecting rod secures the piston, while the large end connects to the crankshaft. Together, the crankshaft and connecting rods transform the up-and-down motion of the pistons into rotational motion.

7

2

Share

How to Fold Down and Open the Rear Seats of the Odyssey?

The steps to open and fold down the rear seats of the Odyssey are as follows: There is a lever on each side of the rear seat headrest that can be used to fold the seatback. Then, open the tailgate, and you will find a handle at the lower rear part of the seat. Lift it upward, and there is a strap behind the seatback. Pull it along the direction until the entire rear seat is folded flat. This is how you fold down the rear seats. The Odyssey is a mid-to-large-sized MPV under Honda. The vehicle measures 4845mm in length, 1802mm in width, and 1697mm in height, with a wheelbase of 2900mm. It comes standard with a 2.4L Earth Dreams engine paired with an efficient and smooth CVT transmission, delivering a maximum power of 137kw and a maximum torque of 243nm.

2

0

Share

What are the starting steps for a manual transmission car?

The starting steps for a manual transmission car are: 1. Depress the clutch pedal and shift the gear lever into first gear; 2. Honk the horn and release the handbrake; 3. Gradually release the clutch pedal while steadily pressing the accelerator pedal. When the clutch pressure plate begins to engage with the driven plate, pause the clutch pedal slightly at this position, then continue to slowly release the clutch pedal once the car starts moving smoothly. Precautions for clutch control: 1. The correct posture for depressing the clutch is to place the ball of your foot on the clutch pedal with your heel touching the ground. When the clutch is fully depressed, keep your knee slightly bent. Avoid using only your toes or lifting your heel off the ground to prevent insufficient force or slipping.

19

0

Share

What Causes Body Shaking During Idle?

Possible causes of car body shaking during idle include: 1. Unstable oil pressure: If you've already cleaned engine carbon deposits, washed the throttle valve, replaced gaskets and spark plugs, but still experience body shaking during idle, it's recommended to visit a 4S shop to check fuel supply pressure and intake pressure sensors. Abnormal fuel pump pressure or faulty intake pressure sensor values can cause body shaking. Solution: Check oil pressure and replace components if necessary. 2. Severe engine carbon deposits: The most common cause of car shaking is excessive dirt in the throttle valve or carbon buildup in fuel injectors. When there's too much carbon inside the engine, gasoline sprayed by cold-start injectors gets largely absorbed by carbon deposits, resulting in an overly lean mixture during cold starts and making ignition difficult. Only when carbon deposits become saturated with gasoline can the engine start easily. After starting, gasoline adsorbed on carbon deposits gets sucked into cylinders by engine vacuum for combustion, making the mixture too rich. This alternation between lean and rich mixtures causes idle shaking after cold starts. Lower temperatures require more fuel for cold starts, making carbon deposits more likely to affect successful cold starts. Solution: Clean the fuel system and check if the idle control valve has carbon deposits that need cleaning. 3. Ignition system issues: Check the condition of spark plugs, high-voltage wires, and ignition coils. Poor ignition system performance or bad spark plug firing can also cause such problems. Solution: Check if spark plugs have excessive carbon buildup and replace them if needed. 4. Aging engine components: Car shaking may also relate to worn engine mounts. Engine mounts actually serve as the engine's shock absorption system, absorbing minor vibrations during operation. If engine mounts fail, these vibrations get transmitted to the steering wheel and cabin, causing shaking during idle.

11

2

Share

Is it seat cushion or sitting cushion in a car?

What is the correct parking procedure for an automatic transmission vehicle?

Where is the radar switch on the Spirior?

What are the main components of the crankshaft flywheel assembly?

How to Fold Down and Open the Rear Seats of the Odyssey?

What are the starting steps for a manual transmission car?

What Causes Body Shaking During Idle?

What are the differences between the Touareg 4WD Comfort Edition and Luxury Edition?

What engine does the Cadillac XT5 use?

Should the Verano turbocharged engine use 92 or 95 octane gasoline?

What is the fuel consumption of the Luxgen 7 SUV?